1. Packaging Design: Net This net is for an octagonal based prism. As with all technical drawings, the equipment goes a long way in helping you to draw a complicated shape with little measuring involved.

2. Use A3 Paper 1cm border, 1cm name bar, 2cm indent.

3. 100mm/10cm

6. Draw a vertical centre line

7. 20mm Measure 40mm either side of the centre line-this is one side of your Octagon 20mm

9. PARALLEL MOTION

13. 40mm/4cm

14. PARALLEL MOTION 45 degree line

15. PARALLEL MOTION

21. Open your compass up to the length of one side of the octagon

22. PARALLEL MOTION Mark off this length along the horizontal line as shown

23. PARALLEL MOTION Repeat this for a total of 7 times

24. PARALLEL MOTION

26. 10mm

27. PARALLEL MOTION 10mm 45 degree lines are drawn for the sides of the flaps

28. PARALLEL MOTION 10mm

29. PARALLEL MOTION

30. 1. Home Work: Trace your net onto another sheet of A3. 2. Fill in a design with the theme on recycling using appropriate colours and designs. You can add a window to your design also.Remember do not colour in the glue tabs. 3. Cut out but do not assemble