1. Lokotrack ST352 Presentation
Product Launch, Manchester, January 2005

2. Lokotrack ST352
Introduction

3. Machine specification
Lokotrack ST352
Machine specification

4. Machine specification
Lokotrack ST352
Machine specification

5. Lokotrack ST352
Chassis & Track Layout
Twist Lock

6. Lokotrack ST352
Grid Layout

7. Lokotrack ST352
Hopper Layout

8. Feeder Conveyor specification
Lokotrack ST352
Feeder Conveyor specification

9. Feeder Conveyor Layout
Lokotrack ST352
Feeder Conveyor Layout

10. Main Conveyor specification
Lokotrack ST352
Main Conveyor specification

11. Lokotrack ST352
Main Conveyor Layout

12. Side Conveyor specification
Lokotrack ST352
Side Conveyor specification

13. Lokotrack ST352
Side Conveyor Layout

14. Product Conveyor specification
Lokotrack ST352
Product Conveyor specification

15. Product Conveyor Layout
Lokotrack ST352
Product Conveyor Layout

16. Lokotrack ST352
Screen specification

17. Lokotrack ST352
Screen Layout 3 8 4 9 1 5 12 7

18. Lokotrack ST352
Screen Tension Layout

19. ST352 EMR Engine management & control system
Lokotrack ST352
ST352 EMR Engine management & control system

20. ST352 PLC SmartScreen™ Technology
Lokotrack ST352
ST352 PLC SmartScreen™ Technology
Radio key
Fuel pump
Hand valves
Work
lights
Drive lights
Emergency
stop
Key
switch
Process ON
Signal horn
OFF
Safety switch
for conveyors
Display

21. ST351PLC SmartScreen™ Technology via the IC300
Lokotrack ST352
ST351PLC SmartScreen™ Technology via the IC300
PLC SmartScreen™ IC300 INTELLIGENT CONTROLLER
TOTAL PLANT CONTROL SYSTEM. ALLOWS DEFAULT SETTINGS FOR DIFFERENT APPLICATIONS.
SCREEN SPEED SENSOR
ENSURES SCREEN OPERATES AT OPTIMUM RPM PROVIDING MORE RELIABLILITY, CONTINUOUS PRODUCTION & OPTIMUM SCREENING EFFICIENCY.
MAIN CONVEYOR LOAD SENSOR.
PROVIDES ACCURATE LOAD SENSE PRESSURE WHICH ENABLES PRECISE FEED RATES OF MATERIAL TO THE SCREEN VIA FEEDER CONVEYOR & MAIN CONVEYOR.
DIAGNOSTIC FEATURE.
EXCELLENT TOOL FOR SERVICE PERSONELL & OPERATORS.
COMPATABLE WITH IC500 (LT INTELLIGENT CONTROLLER).
SYSTEM IS SIMILAR TO EXISTING LT CONTROLLER AND CAN BE CONNECTED TO OTHER METSO (LT) PRODUCTS VIA A CABLE. BOTH PLANTS COMMUNICATE ENSURING OPTIMUM EFFICIENCY & PRODUCTION
ONE TOUCH BUTTON TO START / STOP PROCESS
EASY OPERATIONAL SYSTEM. NO NEED FOR MANUAL CONTROLS.

22. ST352 PLC SmartScreen™ Technology via the IC300 CONTROL SYSTEM
Lokotrack ST352
ST352 PLC SmartScreen™ Technology via the IC300 CONTROL SYSTEM
1. Engine rotation speed
2. Screen pressure
3. Screen running speed
4. Radio control / Drive box symbol
5. N/A
6. Fuel amount
7. Window number
8. Time
9. Screen track image ST348
10. Message field
11. Unit information (=F1)
12. Help (=F2)
13. Process options (=F3)
14. Settings (=F4)
15. Diagnostics (=F5)

23. ST351 PLC SmartScreen™ Technology via the IC300 MANUAL CONTROL OPTIONS
Lokotrack ST352
ST351 PLC SmartScreen™ Technology via the IC300 MANUAL CONTROL OPTIONS
+ F3
Highlight the manual control symbol in the process options window and confirm your selection with F3 window. You will get to the manual control window.
1. Grid up
2. Grid down
3. Screen on / off
4. Product & Wings conveyors off / on
5. Feeder & Main conveyor off/on
6. Engine speed adjustment
7. Manual control of the devices - more
8. Tracks movement
Note:
This control method should only be used if:
-the system is not able to run the process
normally or
-the unit is under a service

24. Lokotrack ST352
ST352 PLC SmartScreen™ Technology via the IC300 USER EDITABLE PARAMETERS F4 F5
Value
Parameter
number
From the parameter/service window you will get to system parameters. First, use arrow keys F4 or F5 to move to the symbol you want to adjust. The symbol will be highlighted. After this, press F3 to get to the parameter setting window of the device in question.
When parameter setting window is opened, the parameter number box (on the left) is highlighted. The middle view shows the parameter description, default value and range. The box on the right indicates the value of the parameter. With F4 and F5 you can scroll from one parameter to another.
Press F3 to highlight the value box. F4 becomes a – button and F5 becomes + button. With – and + buttons you are able to change the parameter value. Press F3 and the data will be saved. F4 and F5 will turn back to arrow buttons.

25. Lokotrack ST352
ST351 PLC SmartScreen™ Technology via the IC300 DETAILED INPUT / OUTPUT TEST - 19
If you select ECM XM1 connector of the modules shown in window 12, this window (number 19) is opened. The window shows all pins in the selected connector.
Otherwise the actual value and the unit are shown.
Return to the previous window by pressing F1.

26. ST352 Remote control stations
Lokotrack ST352
ST352 Remote control stations
Cable remote (Dog lead)
CABLE REMOTE FOR TRACKING ON & OFF OF TRANSPORT, MANOUVERING AROUND THE JOB SITE AND OPERATING VARIOUS FUNCTIONS OF THE PLANT.
AVAILABLE FUNCTIONS INCLUDE: ENGINE SHUTDOWN, ENGINE INCREASE / DECREASE RPM & TRACKING.
PLUG SOCKETS LOCATED AT THE PLC, REAR & FRONT OF THE UNIT ENSURING TOTAL VISION FOR THE OPERATOR DURING TRACKING
Wireless remote control. As per ST171 & ST348
WIRELESS REMOTE FOR TRACKING ON & OFF OF TRANSPORT, MANOUVERING AROUND THE JOB SITE AND OPERATING VARIOUS FUNCTIONS OF THE PLANT FROM THE LOADING SHOVEL / EXCAVATOR.
AVAILABLE FUNCTIONS INCLUDE: GRID TIP SEQUENCE, ENABLE PROCESS, ENGINE SHUTDOWN, ENGINE INCREASE / DECREASE RPM & TRACKING.
THE REMOTE SET IS FITTED WITH A SUPPORT STRAP SO THAT IT CAN BE EASILY FITTED OVER THE OPERATORS SHOULDERS WHEN IN USE.
BATTERY CHARGER LOCATED NEXT TO PLC MOUNTED IN THE POWERPACK.

27. Lokotrack ST352
Powerpack Layout 6 2 1 11 6 4 9 4

28. Lokotrack ST352
Powerpack Layout

29. Lokotrack ST352
Powerpack Layout