1. WINABMS TRAINING By: Chaucey Chandler Senior Marketing Engineer

2. Downloading the Software Using the Software Reviewing the Manual Creating a New File Using Several Different Tools *Note: Reference the WinABMS manual 1492-UM001C-EN-E for more details Creating and Sending in an Order Questions WinABMS Training will include*:

3. Downloading the software

4. Go to: http://www.ab.com/industrialcontrols/ software/termblock/index.html - OR - Order the software 1492-PLSOFT from PASSPORT

5. Downloading the software Scroll down Going to the website, youll see this:

6. Downloading the software WinABMS Software will appear: Select Download WinABMS software

7. Downloading the software Save As… will appear: Save this file, from the website or the software disk 1492- PLSOFT, to your Desktop

8. Downloading the software Now, go to your Desktop: Select ABMSInst.exe

9. Downloading the software Choose a Language: Select Continue

10. Downloading the software Screen before the Installation: Select Yes

11. Downloading the software The software will be installed in C:\Program Files\WinABMS Select Continue

12. Downloading the software Create this new Directory: Select Yes

13. Downloading the software After the installation, you will see: Select Ok

14. Downloading the software WinAMBS has been installed successfully!!!

15. Using the software Lets view the WinABMS Manual

16. Using the software: WinABMS Manual The Manual Select Programs, WinABMS, then WinABMS.pdf to review the manual

17. Using the software: WinABMS Manual This is the manual Scroll down to read about WinABMS Software

18. Using the software Now lets use WinABMS Software!!!

19. Using the software: Creating a File Go to your Desktop: Select Programs, WinABMS, then WinABMS to use the software

20. Using the software: Creating a File Choose a Language: Select Options, Language, then your preferred language

21. Using the software: Creating a File After Choosing a Language, Start a New File: Select File, then New...

22. Using the software : Creating a File Select the Base Plate *: Select Ok *Note: 1492-PLATE = Marker Cards, 1492-PLATE2 = IDC Marker Cards, 1492-PLTMR = Marking Rod, and PLTDINA3 = Adhesive Labels For this example, well use Allen Bradley WinABMS

23. Using the software : Creating a File Gray Frame appears: Select Zoom Out two times

24. Using the software : Creating a File Gray Frame has (6) compartments for (6) marker cards 1 2 3 4 5 6

25. Using the software : Creating a File Zoom in to previous screen: Select Zoom In two times

26. Using the software : Creating a File Create a Marker Card: Double click the dark gray area

27. Using the software : Creating a File Adding the Markercard Information*: Select your specific Marker Card *Note: The Name is optional Then, select OK

28. Using the software : Creating a File This is a marker card. Lets add information!!! Double click on this marker

29. Using the software : Creating a File Adding information: Begin typing AB1 (it will appear at the blinking cursor in this white box)

30. Using the software : Creating a File Adding Information: The typed information appears in two places

31. Using the software : Creating a File Adding Information: Double click on the next marker to add information, and type AB2

32. Using the software : Creating a File Adding Information: The typed information appears in two places

33. Using the software That is how you create a new file!!!! Hooray!!!

34. Using the software Now lets go over some special tools!!!!

35. Using the software: Different Tools Adding Consecutive Numbers: Single click on the next marker to add information

36. Using the software : Different Tools Adding Consecutive Numbers: Select Tools, then Range...

37. Using the software : Different Tools Adding Consecutive Numbers: Type in the Leading Text AB, Start Value 1, and End Value 50

38. Using the software : Different Tools Adding Consecutive Numbers: After adding the information, select OK

39. Using the software : Different Tools Adding Consecutive Numbers: The marker card now has AB1 through AB50* *Note: Where the blue box is, that is where the information starts

40. Using the software : Different Tools Changing the Layout: Select Format, Layout, then Style 2 You can Select the Horizontal A, on the tool bar OR

41. Using the software : Different Tools Changing the Layout: The layout changes from Style 1 (Vertical) to Style 2 (Horizontal)* *Note: The red boxes identify that there is too much information in these boxes; therefore, all of this information will not be shown when this marker card is printed

42. Using the software : Different Tools Changing the Size of the Information: Select the boxes that are outlined in red

43. Using the software : Different Tools Changing the Size of the Information*: Select Format, then Marker… *Note: It is recommended that 6 point font is the smallest legible font that should be used

44. Using the software : Different Tools Changing the Size of the Information: Type in size 6

45. Using the software : Different Tools Changing the Size of the Information: Select OK

46. Using the software : Different Tools Changing the Size of the Information: The font size has changed to 6 pt

47. Using the software : Different Tools Changing the Size of the Information OR

48. Using the software : Different Tools Changing the Size of the Information: Select the 10

49. Using the software : Different Tools Changing the Size of the Information: Type 6 Then, single click on the dark gray area

50. Using the software : Different Tools Changing the Size of the Information: The font size has changed to 6 pt

51. Using the software : Different Tools Duplicating a Marker Card: Select Edit, then Duplicate Card* *Note: The card that will be duplicated must be selected (it will be outlined in blue)

52. Using the software : Different Tools Duplicating a Marker Card: The card is duplicated (zoom out for more details)

53. Using the software : Different Tools Removing a Marker Card*: Select Format, then Marker Card... *Note: The card that will be removed must be selected (it will be outlined in blue)

54. Using the software : Different Tools Removing a Marker Card: Select Remove

55. Using the software : Different Tools Removing a Marker Card: The card is removed (zoom out for more details)

56. Using the software : Different Tools Copy and Paste Information: Select the boxes you want to copy

57. Using the software : Different Tools Copy and Paste Information: Select Edit, then Copy

58. Using the software : Different Tools Copy and Paste Information: Single click the box to add information

59. Using the software : Different Tools Copy and Paste Information: Select Edit, then Paste

60. Using the software : Different Tools Copy and Paste Information: The information is added

61. Using the software : Different Tools Save Information: Select File, then Save

62. Using the software : Different Tools Save Information: Type your file name Then, select Save

63. Using the software : Different Tools Save Information: The file is now saved

64. Creating and Sending in an Order Lastly, lets create and send in a new order!!!

65. Creating and Sending in an Order The Distributor sends in the order to the email address* : RAMilwCustomMarkers@ra.rockwell.com The following should be included in the email: Allen Bradley order number (in the subject of the email) Created WinABMS file (attached to the email) Quantity (the number of needed copies of the WinABMS file) Company information (with a contact name and number in the email) After the file is saved: The Distributor gets an order number from PASSPORT *Note: Email only custom orders that are not identified in the Terminal Block Selection Guide or Industrial Controls Catalogue

66. Questions For additional information, contact the DRC or ACES group at 1-888-382-1583 This is the end!!!!