Presentation is loading. Please wait.

Presentation is loading. Please wait.

Title EMEA Advanced Technical Training Printer Configuration Open and run the DMX Configuration Tool For the next session we will be using this tool to.

Published byIan Mills Modified over 10 years ago

Similar presentations

Presentation on theme: "Title EMEA Advanced Technical Training Printer Configuration Open and run the DMX Configuration Tool For the next session we will be using this tool to."— Presentation transcript:

1 Title EMEA Advanced Technical Training Printer Configuration Open and run the DMX Configuration Tool For the next session we will be using this tool to demonstrate how to configure the printer

2 Title EMEA Advanced Technical Training Printer Configuration Default Opening Menu During this session we will be working through the various menus/tabs to learn how to configure the printer Information Printer Type and Firmware Current Connection

3 Title EMEA Advanced Technical Training Printer Configuration Media Settings Exercise 1 Measure the Length/height of the label, that is being used. Now set the label length to a setting shorter than this figure Exercise 2 Set Label width to a value of 2 Exercise 3 Set Paper Out Distance to a value of 4.0

4 Title EMEA Advanced Technical Training Printer Configuration Print Control Exercise 1 Set Present Distance to a value of 2 Exercise 2 Set present adjust to a value of +32 Exercise 3 Set present adjust to a value of -32

5 Title EMEA Advanced Technical Training Printer Configuration Printer Options Exercise 1 Enable cutter and disable cutter

6 Title EMEA Advanced Technical Training Printer Configuration Memory Modules Exercise 1 Select a graphic and send to printer module G Exercise 2 Select a TTF font and send to printer

7 Title EMEA Advanced Technical Training Printer Configuration System Settings Exercise 1 Select and change Menu Language Exercise 2 Select Menu Mode and change

8 Title EMEA Advanced Technical Training Printer Configuration Host Connection

9 Title EMEA Advanced Technical Training Printer Configuration Network We will cover this section at a later time

10 Title EMEA Advanced Technical Training Printer Configuration Sensor Calibration Exercise 1 Change the values of the settings to see what effect they have

11 Title EMEA Advanced Technical Training Printer Configuration Communications 1

12 Title EMEA Advanced Technical Training Printer Configuration Communications 2

13 Title EMEA Advanced Technical Training Printer Configuration User Functions

14 Title EMEA Advanced Technical Training Questions

Download ppt "Title EMEA Advanced Technical Training Printer Configuration Open and run the DMX Configuration Tool For the next session we will be using this tool to."

Similar presentations

What Was I Thinking??. Key Terms 1. Control 1. Control 2. Design Mode 2. Design Mode 3. Event 3. Event 4. Form 4. Form 5. Interface 5. Interface 6. Properties.

What Was I Thinking??. Key Terms 1. Control 1. Control 2. Design Mode 2. Design Mode 3. Event 3. Event 4. Form 4. Form 5. Interface 5. Interface 6. Properties.
Chapter 7 – Managing Windows XP. Control Panel The main tool for configuring your system. Most of the tools to configure the system come with the normal.

Chapter 7 – Managing Windows XP. Control Panel The main tool for configuring your system. Most of the tools to configure the system come with the normal.
X Window. Module 3 X Window ♦ Introduction The X Window System (‘X’ or ‘X11’) is a graphical windowing system that was developed at MIT in 1984. ♦ The.

X Window. Module 3 X Window ♦ Introduction The X Window System (‘X’ or ‘X11’) is a graphical windowing system that was developed at MIT in ♦ The.
MS-Word XP Lesson 2. Page Setup & Margins 1.Click on file menu 2.Click on page set up menu item 3.Select margins tab sheet (default activated) 4.Type.

MS-Word XP Lesson 2. Page Setup & Margins 1.Click on file menu 2.Click on page set up menu item 3.Select margins tab sheet (default activated) 4.Type.
Www.argox.com All rights reserved. Copyright © 2008 Argox Information Co., Ltd ISO 9001:2000 F1 Commercial & Light Industry Printer.

All rights reserved. Copyright © 2008 Argox Information Co., Ltd ISO 9001:2000 F1 Commercial & Light Industry Printer.
Engineer Training XL1200 Software 4.010. Engineer Training XL1200 Software 4.010 Confidential 2 Print options Archive Print queue Toolbar Preview & Information.

Engineer Training XL1200 Software Engineer Training XL1200 Software Confidential 2 Print options Archive Print queue Toolbar Preview & Information.
ONYX RIP Version Technical Training General. Overview General Messaging and What’s New in X10 High Level Print and Cut & Profiling Overviews In Depth.

ONYX RIP Version Technical Training General. Overview General Messaging and What’s New in X10 High Level Print and Cut & Profiling Overviews In Depth.
Microsoft Excel 2003 To start Excel, click the start button. A slightly different procedure might be required for computers on a network. If you need assistance,

Microsoft Excel 2003 To start Excel, click the start button. A slightly different procedure might be required for computers on a network. If you need assistance,
Unit Test Calibration Training

Unit Test Calibration Training
Interfacing with Computer Associate Degree in Education (ADE) Lecture 04 Sajid Riaz.

Interfacing with Computer Associate Degree in Education (ADE) Lecture 04 Sajid Riaz.
© by Pearson Education, Inc. All Rights Reserved.

© by Pearson Education, Inc. All Rights Reserved.
Chapter 10 Chapter 10: Printer Management. Chapter 10 Learning Objectives n Describe the printing process used by Windows NT n Install a local printer.

Chapter 10 Chapter 10: Printer Management. Chapter 10 Learning Objectives n Describe the printing process used by Windows NT n Install a local printer.
9.1 © 2004 Pearson Education, Inc. Exam 70-290 Managing and Maintaining a Microsoft® Windows® Server 2003 Environment Lesson 9: Installing and Configuring.

9.1 © 2004 Pearson Education, Inc. Exam Managing and Maintaining a Microsoft® Windows® Server 2003 Environment Lesson 9: Installing and Configuring.
CHAPTER Hard Resource (Printer) Sharing. Chapter Objectives Explain the concept of sharing a hard resource Present the step-by-step process of placing.

CHAPTER Hard Resource (Printer) Sharing. Chapter Objectives Explain the concept of sharing a hard resource Present the step-by-step process of placing.
70-290: MCSE Guide to Managing a Microsoft Windows Server 2003 Environment Chapter 8: Implementing and Managing Printers.

70-290: MCSE Guide to Managing a Microsoft Windows Server 2003 Environment Chapter 8: Implementing and Managing Printers.
Digimap Carto is an advanced version of classic but with many more options. You need to return to the Digimap home page and this time select the “Digimap.

Digimap Carto is an advanced version of classic but with many more options. You need to return to the Digimap home page and this time select the “Digimap.
Terminal Services Terminal Services is the modern equivalent of mainframe computing, in which servers perform most of the processing and clients are relatively.

Terminal Services Terminal Services is the modern equivalent of mainframe computing, in which servers perform most of the processing and clients are relatively.
A+ Guide to Software, 4e Chapter 11 Supporting Printers and Scanners.

A+ Guide to Software, 4e Chapter 11 Supporting Printers and Scanners.
Monitoring systems COMET types MS55 & MS6 MS55/MS6 Configuration.

Monitoring systems COMET types MS55 & MS6 MS55/MS6 Configuration.
Windows Server 2008 Chapter 6 Last Update 2012.05.23 1.0.0.

Windows Server 2008 Chapter 6 Last Update

Similar presentations

Ads by Google