1. GU Automatic GmbH
Your partner for automatic door and sectional door systems, from planning through to maintenance

2. The Gretsch-Unitas group
For more than a hundred years, it has been the company’s philosophy to not merely come up with single products but first of all to develop system solutions for individual and highly specific requirements. According to the Group's principle “Securing technology for you", many different products from the divisions window technology, door technology, automatic entrance systems, and facility management systems can be combined with each other easily.
Product range of more than 30,000 compatible articles
More than 3,500 employees worldwide
Over 50 production and sales companies in more than 35 countries
The Gretsch-Unitas group

3. The Gretsch-Unitas group
Window technology
Effortless tilting, turning, lifting and sliding
Door technology
Opening the door to the future
Automatic
entrance systems
Shaping the world of entrances
Building management systems
Overview of the entire system

4. The Gretsch-Unitas group
Gretsch-Unitas Baubeschläge GmbH
in Ditzingen
Product focus:
Hardware solutions for timber, PVC and aluminium windows and balcony-doors
GU Automatic GmbH in Rietberg
Focus: automatic sliding doors and swing doors, revolving door systems, all-glass sliding walls, systems for controlled physical access and industrial doors.
Authorised service provider of maintenance, inspection and servicing tasks on automatic door and sectional door systems
BKS GmbH in Velbert
Product focus: locks, locking cylinders, master key systems, escape door system solutions
ela-soft GmbH in Berlin
Development of non-manufacturer-specific building management systems for security and building technology
GU Baubeschläge/GU Logistik Headquarters of holding company Gretsch-Unitas GmbH
Founded: | Location: Ditzingen | Employees: 400 administration / 400 production / 120 logistics Product focus: hardware for Lift&Slide elements and Tilt&Turn hardware, GU SECURY multi-point locking systems
Special features of the location: flexible punching and assembly technology, state-of-the-art surface finishing technology (electroplating, anodising), international shipping from a modern logistics centre
BKS GmbH Founded: | Location: Velbert | Employees: 630
Product focus: locking cylinders, mortise locks, panic door locks
FERCO International S.A.S.
Founded: | Location: Sarrebourg / Réding (Moselle) | Employees: 800
Product focus: UNI-JET window hardware and components for GU group door hardware
Special features of the production: state-of-the-art automatic assembly machines for high-volume production, efficient high-rack warehouse
GU Automatic / GU-Service
Founded: | Location: Rietberg | Employees: 85
Production: automatic entrance systems including commissioning
Product focus: automatic sliding doors, revolving doors, all-glass sliding walls, service point for assembly, commissioning and maintenance
ela-soft
Founded: 1990 | Location: Berlin among others
Production: non-manufacturer-specific management systems for security, building and communication technology.
AGENA
Location: Ditzingen
IT service provider for the Gretsch-Unitas group
Agena GmbH in Ditzingen
Responsible for the IT tasks of the company group

5. History
1977 founding of "ats GmbH – Automatik-Tür-Systeme" in Rheda-Wiedenbrück
2001 company is taken over by GU group
2009 change of company name:
- GU Automatic GmbH
- GU Service GmbH
2015 relocation to Rietberg in East Westphalia
2018 merging of GU Service GmbH and GU Automatic GmbH to form GU Automatic GmbH
1977 founding of "ats GmbH - Automatik-Tür-Systeme" in Rheda-Wiedenbrück
2001 company is taken over by GU group
2009 change of company name:
- GU Automatic GmbH
- GU Service GmbH
2015 relocation to Rietberg in East Westphalia
2018 merging of GU Service GmbH and GU Automatic GmbH to form GU Automatic GmbH

6. Product portfolio of the GU Automatic GmbH
Automatic sliding doors
Swing-door drives
Revolving doors
All-glass sliding walls
Controlled physical access systems
Industrial doors
Installation, commissioning, service, maintenance

7. GU Automatic GmbH Your partner from planning through to maintenance
Securing technology as system provider
System supplier – manufacturing, sales, installation, service "a one-stop service"
Assembly, maintenance and service by in-house qualified and certified service engineers and installers
Compliance with the current guidelines and standards (DIN / DIN EN 16005) DIN EN ISO 9001 : 2008 certificate & SCC**: 2006 certificate
Annual production capacity for several thousand door systems worldwide
Guaranteed supply of spare parts for 10 years
Compatible general repair kit for all "GU drive systems" used and various "third-party products"
We offer coherent solutions – all as a one-stop service and based on the huge diversity of our products.
We are a capable problem-solving partner – from the details right up to the overall project level. From consulting and planning through to maintenance and service.

8. Automatic sliding doors
For us, making customised doors is standard procedure
Barrier-free entrances
Modern prestigious entrance solution
Most frequent automation of entrance areas
Complete system with control and safety sensors (DIN 18650, EN 16005)

9. Automatic sliding doors in range of variants
Version: 1-leaf, 2-leaf
compactMaster CM and CM-F: up to 100 kg per leaf
econoMaster EM and EM-F : up to 130 kg per leaf
heavyMaster HM and HM-F: up to 200 kg per leaf
Telescopic sliding doors
Version: 2-leaf, 4-leaf
econoMaster EMT and EMT-F, 2-leaf: up to 100 kg per leaf
econoMaster EMT and EMT-F, 4-leaf: up to 80 kg per leaf

10. Automatic sliding doors in range of variants
Curved sliding doors
Version: 1-leaf, 2-leaf
compactMaster CMR and CMR-F up to 100 kg
Prismatic sliding doors
Version: 1-leaf, 2-leaf
compactMaster CMW and CMW-F up to 100 kg

11. econoMaster EM und EM-F in-line sliding door
Reliable and economical – for almost all applications
Redundant drive with 2 motors for use in escape and rescue routes (type HM-F)
Drive height 130 mm
Running smoothness thanks to large rollers with exchangeable rubber-coated running face
High opening speed up to max. 0.9 m/s
Clear and simple operation
Self-learning control system with many adjustment and connection options
The drives are type-tested by TÜV
Certified to DIN 18650

12. compactMaster CM and CM-F in-line sliding door
The slim sliding door with elegant appearance
Redundant drive with 2 motors for use in escape and rescue routes (type CM-F)
"True" drive height of 100 mm in conjunction with the G30 profile system
Running smoothness thanks to large rollers with exchangeable rubber-coated running face
Clear and simple operation
Optionally available with locking element integrated into the carriage, AMV automatic multi-point locking system or floor/hook bolt lock
Self-learning control system with many connection and adjustment options

13. HM-F FT escape route sliding door
Guaranteed escape route even when door is locked
With the type-tested HM-F FT escape route sliding door it is possible to "break out" the locked sliding panel outwards (escape direction) when actuating the FTNT10 escape door control unit.
This resolves a conflict between regulatory standards. The type-tested escape route sliding door to AutSchR and EltVTR guarantees a safe escape route when in the operating mode OFF/NIGHT, also when locked.
Planning certainty thanks to type-tested door assemblies – no individual approval by building authorities required

14. Telescoping sliding door EMT/EMT-F Lockable escape door HM-F FT
Technical data overview
Product overview, automatic sliding doors
EM/EM-F
CM/CM-F
WK2
HM/HM-F
Telescoping sliding door EMT/EMT-F
Lockable escape door HM-F FT
Certified to DIN and EN 16005 x
Drive height
130
100
145
Sash weight in kg
200
4 x 80
Opening width, 1-leaf, in mm
800–2000
900–2500
900–1300
Opening width, 2-leaf, in mm
800–3000
1000–3000
1400–3800
1200–2600
Locking
bi-stable
AMV automatic multi-point locking system no
Winter opening
Pharmacy opening*
Power consumption in watts
160 VA
Average power consumption during operation
50 VA
Power consumption in OFF state
< 10 VA
* only with escape route version, but not in combination with AMV automatic multi-point locking
system

15. Swing door drive DTN 80
High-performance on standard and fire protection doors
All applications can be implemented using only one swing-door drive:
1- and 2-leaf swing doors
Fire doors
Escape doors
Push-open or pull-open
Closing force instead of latching speed
Patented energy-store consisting of two spring assemblies which can be adjusted separately
Convenient adjustment options directly at the drive via the rotary knob/push-button with integrated display under the drive cladding

16. Revolving doors Effective protection against draughts, cold and dirt
Impressive entrance areas:
Optimum functionality, draught and noise-proof building access
Available as manual or automatic system
Ideal for heavy visitor traffic
Offers plenty of space for shopping carts, prams, wheelchairs
Manual or automatic night shield
Suitable for use in escape and rescue routes due to foldable leaves, which are securely fixed in normal operation

17. Security revolving doors
Secure access control and attractive appearance
High efficiency, low space requirement:
Access control, even in high-traffic areas
Contact floor mat for monitoring
Electro-motorised locking at the turnstile and/or with mechanical shoot-bolt locks
Easy adaptation to on-site access control systems
Different materials and finishes for individual solutions

18. All-glass systems GSW
Elegant optics, flexible room use and low space requirement
Exclusive and convenient:
Available as manual or automatic system
Available as linear, angled or curved version
Element weights up to 150 kg
Special solutions with elements up to mm are possible

19. Controlled physical access systems
For interior and exterior use
Robust and vandalism-resistant for every purpose – also for barrier-free entrances:
Ideal for heavy visitor traffic
Tamper-proof
Easy adaptation to on-site access control systems
Different materials and finishes for individual solutions

20. Industrial doors Industrial doors for universal use
Industrial doors available in range of variants:
Industrial sectional door
Fire station doors
Roller-shutter doors, rolling grills and high-speed doors
Industrial sectional door with stainless steel hardware for washing installations and wash halls
Sectional door with steel slats: 40 mm to 80 mm double-walled steel slats, filled with rigid PU foam thermal insulation and with optional glazing
Size range/modular dimensions in various versions
All versions satisfy the safety requirements and specifications of EN
Photo: Teckentrup GmbH & Co. KG

21. Customer service for doors and gates
Authorised and certified customer service
A one-stop service: installation, commissioning, service, maintenance and spare parts directly from manufacturer
Non-manufacturer-specific maintenance and repair service for automatic entrance systems
Certified to ISO 9011 and SCC
Member of FTA – professional association for door automation in Germany
Entered in the official register of handicrafts of the East Westphalia-Lippe Chamber of Crafts in Bielefeld

22. Overview map of customer service locations
Authorised and certified customer service
More than 70 engineers nationwide
Maintenance of all door and gate systems, irrespective of manufacturer and brand
A service contract for automatic door systems offers many advantages:
Inspections and upgrades, to ensure that you as operator comply with all applicable provisions
This significantly reduces the number of unscheduled service visits, which minimises downtimes and costs
Management of a system-specific documentation
Service customers receive discounts on parts prices and pay fixed travel fees
24-hours service hotline:
(14ct./Min. aus dem Festnetz, Mobilfunk max. 42ct/Min.)

23. Thank you for your kind attention!
GU Automatic GmbH
Thank you for your kind attention!
You can also visit us at:
Copyright notice
All illustrations and texts in this publication are protected by copyright. Unless otherwise stated on the image, the rights belong to the Gretsch-Unitas group. Any use of copyright protected materials without the consent of the holder of the rights is prohibited.
Publisher
GU Automatic GmbH
Karl-Schiller-Straße 12 | D Rietberg
Tel