1. ENTSO-E Common Grid Model Exchange Standard (CGMES)
Implementation of the dynamics profile
Kick off web conference with vendors
12 December 2013,
Participants: Christoph, Ferdinando, Giatgen, Olaf, Stefan, Chavdar, Wim, Richard, Sam, Emilie, Chuck, Adriano
Chavdar Ivanov
Research and Development Senior Advisor

2. Agenda Information on CGMES Members of the team The overall process
What we have available
What we need
Next steps
Discussion

3. Information on CGMES
The ENTSO-E Common Grid Model Exchange Standard (CGMES) – based on draft IEC CIM 16
Now in final approval stage – decision expected on 18 Dec
ENTSO-E discussed conformity process
IOP 2014 – planned (14 July 2014)

4. Members of the team – vendors (persons for the email list)
Power Factory: Christoph Schmid, Richard Lincoln, Stefan Weigel
Eurostag: Christian Merckx, Emilie Milin
SICRE: Roberto Zacheo, Ferdinando Parma
Neplan: Giatgen Cott
PSS/ODMS, PSS/E, Netomac: Sam Philipson, Charles Dubose, Michael Ford, Olaf Ruhle, Jay Senthil
CEPS tool: Karel Maslo

5. Members of the team – TSOs (persons for the email list)
Hans Abildgaard (Energinet.dk)
Walter Sattinger (swissgrid)
Adriano Gubernali (Terna)
Luca Bonuglia (Terna)
Eckhard Grebe (Amprion)
Sergio Martinez (REE)
Oana Stanescu (Transelectrica)
Georgi Bozukov (ESO)
Vladimir Milic (EMS)
Philippe Carpentier, Alexandre Parisot, Gabriel Bareux (RTE)
Stylianos Kromlidis (National Grid) – corresponding member

6. Members of the team – ENTSO-E Secretariat (persons for the email list)
Chavdar Ivanov
Wim Ivens

7. The overall process Models were grouped Monthly schedule defined
All vendors – implement, run the tests and post the results
Secretariat merge the results
All assess the charts if the results are OK
The results are documented in an Implementation guide
The “typical values” for all attributes are updated in the UML
If the results of the tests are not OK due to problems in the dynamics profile (in case of profile issues)
Description of a standard model can be updated, but no UML structural changes should be applied

8. What we have available
ENTSO-E WG SPD report : operations-reports/continental-europe/
RG_SOC_CE/131127_Controller_Test_Report.pdf
The documentation of the Dynamics profile of the CGMES
Test model used by WG SDP and available to vendors
Test procedures from the IOP

9. What we need
The precise test procedures (1-2 tests + the description of what simulations are run; solution settings, simulation step, etc should be defined)
Test model in CGMES v (The base case model used by WG SPD should be exported and documented)
xls templates to collect the results from the simulations
A template of the Implementation guide so that we can document step by step

10. Next steps
Pilot to test the process: VCompIEEEType1, ExcSEXS, ExcIEEEAC1A, ExcIEEEDC1A, ExcIEEEST1A, PssIEEE2B, GovSteam0, SynchronousMachineTimeConstantReactance
Test procedures available by 15 Jan
Test model exported in CGMES by 15 Jan
First comparison of results for the pilot models – last week of Jan