1. March 2017
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: Airport Ground Operations Automation Using IoT/IoL Linked Runway Lighting System for Smart Airport Solution
Date Submitted: September 2019
Source: Jaesang Cha, Seongkwon Kim (SNUST),Sangwoon Lee (Namseoul Univ.), Jintae Kim (Fivetek Co., Ltd.), Sungdoo Kang (Feelux Co., Ltd.), Changsoo Lee (L&S LED Co., Ltd.), Sangil Lim (Signtelecom Co. Ltd.),Sung Hoon Yoon (Kogen Corp.),Shoil lee(D3-Lab),Hyeongho Lee (Netvision Telecom Inc., Korea Univ.), Yoonkwan Kim (The Catholic Univ.), Sooyoung Chang (SYCA), Vinayagam Mariappan (SNUST)
Address: Contact Information: , FAX: ,
Re:
Abstract: This documents introduce the V2X IoT/IoL connectivity link design considerations for VAT. This proposed IoT/IoL link uses the airport runway LED lighting system for airport ground operations automations. This VAT solutions also used for application services like ITS, ADAS, etc. on road condition.
Purpose: To provided concept models of Light Communication based IoT/IoL Link solution for Vehicular Assistant Technology (VAT) Interest Group.
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
Slide 1
Submission

2. Contents Needs for Airport Ground Operations Automation
March 2017
Contents
Needs for Airport Ground Operations Automation
Runway Lighting Based IoT/IoL Link For Airport Ground Operations
Conclusion
Slide 2
Submission

3. Needs for Airport Ground Operations Automation
March 2017
Needs for Airport Ground Operations Automation
Needs
The aircraft congestion and accidents occur due to increasing air traffic in airports.
Every aircraft when taking off or landing at the airport follow the guidance system from the flight control room and the instructor.
Ensuring safety within ground operations during the age of automation is top priority in the airport ground service providers.
In order to provide effective ground operation service, airport services provider need find the new navigation solution to automate the aircrafts landing and takeoff pathway control, etc.
Basic Concept
Use the airport ground way lighting infrastructure to provide connectivity with aircraft through visible light communication technology.
The lighting devices transmits the location coordination information and operations to follow and the cameras installed on the aircraft receives the transmitted information to control aircraft operations.
< Airport Ground Operations >
Google
Slide 3
Submission

4. Runway Lighting Based IoT/IoL Link For Airport Ground Operations
March 2017
Runway Lighting Based IoT/IoL Link For Airport Ground Operations
Signal the location information of the parking spot empty,
coordinates to move,…
Move to Takeoff Position
Airport Control Room
Sends Control Signal to Aircraft
IoT/IoL Link through Light
Move to Parking Location
IoT/IoL Connectivity for Airport Ground Operations Automation
Tx : Airport Ground Lighting System
Rx : CMOS Camera Installed in the Aircraft
Day-Night Communication Mode
Modulations
OOK, Offset-VPWM, Multilevel PPM, Inverted PPM, Subcarrier PPM, DSSS SIK etc.
Data Rate : 1K ~ 5Mb/s
Supported LoS (Line of Sight)
Available Distance : 5m ~ 200m
< IoT/IoL Linked Runway Lighting for Smart Airport Solution >
※ Uses the Airport Runway Ground lights to transmit the control information from the airport control center.
※ Airport Control continuously send the coordinates information of the airport parking spaces, takeoff runway location for aircrafts to move within the airport area.
Slide 4
Submission

5. March 2017
Conclusion
Proposed the runway lighting system based IoT/IoL Link for airport ground operations automation for smart airport.
Uses the airport runway ground installed lighting system installed and camera system installed in the Aircrafts.
The proposed solution provides the effective ground operation service to automate the aircrafts landing and takeoff pathway control, etc.
Also, the proposed solution helps to reduce congestion and traffic accidents in the airport when the airport is overloaded.
Slide 5
Submission