1. March 2017
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: Drone based Delivery Service using LiFi / CamCom Data Link for On Drive Time Delivery
Date Submitted: July 2018
Source: Jaesang Cha(SNUST), Ilkyoo Lee (Kongju National Univ.), Chanhyung Chung (RAPA), Incheol Jeong (Sungkonghoe Univ.), Vinayagam Mariappan(SNUST), Sooyoung Chang(SYCA)
Address: Contact Information: , FAX: ,
Re:
Abstract: This documents introduce the V2V LiFi / CamCom Data Link design consideration for VAT. This LiFi / CamCom data link model proposed to introduce the possibility of using light communication for drone based delivery service while buyer in drive on road. This VAT To provided concept models of Light Communication based LiFi / CamCom solution for real-time mobility delivery service using drone.. This can be used on the application services like ITS, ADAS, IoT/IoL, LED ID, digital signage with connected information services etc. on road / on air / on water condition in future.
Purpose: To provided concept models of Light Communication based LiFi/CamCom solution for Vehicular Assistant Technology (VAT) Interest Group
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
Slide 1
Submission

2. Contents Needs for Drone based Delivery Service
March 2017
Contents
Needs for Drone based Delivery Service
LiFi / CamCom Link for Drone based Delivery Service
Conclusion
Slide 2
Submission

3. Needs for Drone based Delivery Service
March 2017
Needs for Drone based Delivery Service
Needs
In future drone will be used deliver all kinds of products to buyer directly
People are moving from workplaces to home or home to workplaces
When they are in moving, the order delivery comes, its difficult to deliver the order buyers on time
In this case, the drone can be used as delivery transport and must find the car of the buyer on road
This will be the effective delivery system model in the future
Basic Concept
LiFi/CamCom technology used to find the buyer car and authorization for delivery of the material
Using the Lighting System attached on the car and the camera installed on the drone, to enable LiFi/CamCom technology for communication between drone and car to enable drone to authorize the buyer faster.
GOOGLE
< Drone for Delivery Service >
Slide 3
Submission

4. LiFi / CamCom Link for Drone based Delivery Service
March 2017
LiFi / CamCom Link for Drone based Delivery Service
LiFi / CamCom Data Link for Drone based Onroad Delivery Service
Tx : Lighting Device on Drone and Vehicles
Rx : PD / CCTV Camera
Modulations :
OOK, VPPM, Offset-VPWM, Multilevel PPM, Inverted PPM, Subcarrier PPM, DSSS SIK etc.
Day-Night Communication Mode
Data Rate : 1K ~ 1Mb/s
Supported LoS(Line of Sight)
Available Distance : around 50m
< LiFi / CamCom Link for Drone based onroad Delivery Service >
※ Defines the future live delivery service to provide onroad delivery system model for future
Slide 4
Submission

5. March 2017
Conclusion
Proposed the Drone based Delivery Service using LiFi / CamCom Data Link for On Drive Time Delivery
Uses the existing vehicle lighting system and camera built-in on vehicles and drone to develop the LiFi / CamCom data link between drone and car to allow drone to find the car of buyer.
Provides the concept models of future live delivery system model and ease the delivery process.
Slide 5
Submission