1. PIN 1. CHANGE TO METRIC UNITS 2. RIGHT PLANE SKETCH AS SHOWN
CHANGE TO METRIC (MMGS)
FOR ALL PART DRAWINGS
1. CHANGE TO METRIC UNITS
2. RIGHT PLANE
SKETCH AS SHOWN
3. EXTRUDED BOSS/BASE

2. 4. SKETCH ON SURFACE
5. EXTRUDED BOSS/BASE
7. EXTRUDED BOSS/BASE
6. NEW SKETCH ON SURFACE

3. 10. FEATURES TAB
CURVES
HELIX AND SPIRAL
8. NEW SKETCH ON SURFACE
9. REGENERATE
13. FEATURES TAB
REFERENCE GEOMETRY
PLANE
11. HELIX AND SPIRAL SETTINGS
12. REGENERATE

4. 14. CLICK THE END OF THE HELIX
CLICK THE HELIX
15. NEW SKETCH ON PLANE1
17. SWEPT BOSS/BASE
SELECT THE TRIANGLE
SELECT THE HELIX
16. REGENERATE

5. 18. RIGHT CLICK HELIX/SPIRAL1
HIDE (EYE BALL)
19. NEW SKETCH ON TOP PLANE
20. REVOLVED CUT
21. NEW SKETCH ON SURFACE

6. 22. EXTRUDED CUT
23. FILLET
24. FINAL DRAWING ON NEXT SLIDE

7. PLACE DIMENSIONS EXACTLY WHERE SHOWN BELOW
*REPLACE # WITH ACTUAL DIMENSIONS*