1. PARTS 12 - 15 12 – ARM PISTON CONNECTOR 13 – ARM BARREL CONNECTOR 14 – HAND BARREL CONNECTOR 15 – BASE BARREL CONNECTOR

2. 12 – ARM PISTON CONNECTOR

3. 1. Sketch on Front plane 2. Extrude Boss/Base 1.5 3. New Sketch on Surface Point to the Right Side Left-Click your mouse Click Sketch button 4. View Normal To Circle .25 5. Extruded Cut Through All

4. 6. Fillet.25 7. Spin the part until you see the bottom. New Sketch on Surface Point to the Bottom, Left-Click your mouse Click Sketch button 8. View Normal To Circle .875 9. Extruded Cut.25 Save as 12 – ARM PISTON CONNECTOR Put into Titlebox (see next slide)

5. FRONT VIEWRIGHT SIDE VIEW BOTTOM VIEW

6. 13 – ARM BARREL CONNECTOR

7. 1. Sketch on Top plane2. Extrude Boss/Base 1.25 3. New Sketch on Surface Point to the Top Left-Click your mouse Click Sketch button 4. View Normal To Draw Rectangle as shown above No need to Smart Dimension

8. 5. Extrude Boss/Base 1 Click Merge result box 6. New Sketch on Surface 7. View Normal To Two Circles .25 8. Extruded Cut Through All 9. Fillet.25 13 – ARM BARREL CONNECTOR Put into Titlebox (see next slide)

10. 14 – HAND BARREL CONNECTOR

11. 1. Sketch on Front plane Save as 14 – HAND BARREL CONNECTOR Put into Titlebox (see next slide) 2. Extrude Boss/Base 1.50 3. New Sketch on Surface 4. View Normal To Draw Rectangle & Circle as shown above 5. Extruded Cut Through All

13. 15 – BASE BARREL CONNECTOR

14. 4. View Normal To Draw Rectangle as shown above No need to Smart Dimension 3. New Sketch on Surface 1. Sketch on Top plane 2. Extrude Boss/Base 1.25

15. 5. Extrude Boss/Base 1 Click Merge result box 6. New Sketch on Surface 7. View Normal To Two Circles .25 8. Extruded Cut Through All 9. Fillet.25 Save as 15 – BASE BARREL CONNECTOR Put into Titlebox (see next slide)