1. SHS Custom Print Process

2. Welcome to AtlasIED DesignLab™

3. AtlasIED DesignLab™
Now that your customer has purchased a SHS Strategically Hidden Speaker they have a few options for the lens cover
It can be left white
It can be painted
It can be customized to match the ceiling it will be installed in through our exclusive DesignLab™ customization process
– Customer will need to order “SHS Custom Design Kit”, SHS-CUST for each unit they want to customize

4. AtlasIED DesignLab™
Once the customer purchases a SHS-CUST Custom Design Kit the will have access to our exclusive DesignLab™ custom process
SHS-CUST includes:
Flange
Custom Printed Disc
Custom Printed Ring
Flange
Disc
Ring

5. AtlasIED DesignLab™
Please note that the SHS-CUST is designed only for use with the Standard 4 & 8 mm lenses that are included in the SHS speaker.
These pieces, including the screws, must be saved to properly install the SHS Custom Designed parts.

6. AtlasIED DesignLab™ Once the SHS-CUST has been ordered:
We will send an with login information for the DesignLab™ portal on our website.
We will send out a SHS Camera target along with Photo Guidelines
Once logged into the DesignLab™ portal, the customer will be guided through the three ways to submit their designs to us:
Upload an image
Enter a color value
Send us a material sample
Or any combination of the three
SHS Camera Target

7. AtlasIED DesignLab™ Once logged into the site the customer
Will see their order details
Be able to add additional Admins to the order
Create a job name for the order
Order extra SHS Camera targets
– 1 per every 5 SHS-CUST ordered
Select how they will submit their design, by quantity

8. AtlasIED DesignLab™
For each way the customer will be submitting their information, by picture, color type, or ceiling material sample, they will see their submission on the web page.
If they are submitting a photo they will need to follow our Photo Guidelines sent with the camera target or watch the video
The customer will need to assign all quantities of SHS-CUST to the order before the next step in the process, printing of the sample lenses can begin

9. AtlasIED DesignLab™
After receiving and processing the customers submission, we will create a sample, or “proof” lens disc that will include seven swatches of minor color variations of their submission.
The sample proof will be shipped to the customer for comparison with their real material. We want them to choose what looks best.
Please note that only one proof disc will be sent for each unique design.
After receiving the proof, the customer will decide which color letter is closest to their material.

10. AtlasIED DesignLab™
After receiving the proof, the customer will decide which color letter is closest to their material.
They will then log back into their order and make their selection based on the letters assigned on the disc.
Once their selections are made we will begin the final print

11. AtlasIED DesignLab™ Example of the printing process
Once we complete the printing of their order the custom trim rings, discs and flanges will be shipped for installation

12. AtlasIED DesignLab™
Once the customer receives the SHS-CUST kit they will need to install the new parts on the SHS speaker using the chosen lens (either 4 or 8 mm)
Depending on the turn around time from the customer the entire process will take about 3 weeks