1. Start today Get your tin can
If you are done with the design remove the paper and wait patiently
If you have not finished your design get the supplies and get to work.

2. Art A
Tin can lanterns

3. Agenda Review of last time
Finish punching designs into cans and filing the inside.
Hydro dip the cans than let dry.

4. Last time We each punched our designed into our tin can lanterns.
Some were able to finish punching out their design today.
If you were not here last time you will need to catch up or you will not be able to hydro dip today.

5. Studio Time Hydro Dip your can Punch out your design into the can
Use the nail and hammer to make the holes
Make sure you have a towel or shirt under you can to keep it steady.
Once you have punched out your design
Use the metal files and file the inside of the can to make it not sharp.
Hydro Dip your can
Put spray paint onto the water than dip your can through the spray paint