Presentation is loading. Please wait.

Presentation is loading. Please wait.

Configuring the Peripheral Crates

Similar presentations


Presentation on theme: "Configuring the Peripheral Crates"— Presentation transcript:

1 Configuring the Peripheral Crates
Fred Borcherding

2 Outline of pcrate config Pages
Start with RCMS Start the pcrate configuration process Open the pcrate configuration XDaq page in browser The Yellow Page The Green Page The boards / slots The MPC Status Utilities The CCB The DMB & CFEBS Tests utilities The TMB, RAT and ALCT Monitor TMB trigger Utils Chamber tests The TTC TTCci LTC

3 LTC – Local Trigger Control
The LTC controls the L1As Can be set for cosmic triggers Can be set for random triggers

4 LTC View with the L1As ENABLED But no L1As generated
Note the orbit and L1A counters

5 Configuration Chooser
Clicking on Configuration Chooser brings up a view of the directories Clicking on Commissioning brings up the configuration processes

6 Starting the pcrate process
The Commissioning directory has 5 processes Click on startPCrate

7 Click on Create to create the process
If you get a message that it already exists Click on Attach

8 If it was just created, you next have to Initialize it
Click on Initialize

9 Do NOT configure – you can click on Status Table

10 Status Table for Configure
Clicking on the link on the rhs will give you XDAQ pages BUT you should use the Bookmarks instead to go directly to the page (or copy the link) Going from the status page gives you a truncated version of the browser without bookmark tabs plus other undesirable features (BAD)

11 Yellow Page This is the famous Yellow Page
The Yellow page is the Home page for all configuration work From the top part you can work on ALL pcrates at once From the lower part you can pick a single pcrate and work on that whole crate Or you can go into that crate and work on individual pcrate boards on CSC and the on-chamber boards

12

13

14 Overview of the Green Page
The green page lists the 21 crate slots and their contents Not all boards need show up on this page The xml (db) for this pcrate is used to draw the board options The slots above 21 were used for special whole crate features – they also must be set up by the xml (db)

15 Green Page Detail There are 6 pcrate board types Slot 1 VCC
Slot 12 MPC Slot 13 CCB TMB > other even slots RAT > linked to TMB behind the crate and not shown here DMB > other odd slots

16

17 ALCT & RAT Status << RAT Status \/ ALCT Status

18

19 Radioactive Trigger 0ALCT > 1of6 layers ALCT fired
13CLCT > 1of6 layers of CLCT pre-trigger fired 17TMB ALCT & CLCT matched

20

21

22

23

24

25

26

27

28

29 After DMB Test All

30


Download ppt "Configuring the Peripheral Crates"

Similar presentations


Ads by Google