1. Office@Huebsch.at http://AMW.huebsch.at
ZST ZIMO Software Tool
© Ing. Arnold Hübsch 2005

2. © http://AMW.huebsch.at 2005
Goal of ZST
Software maintenance for central units
MX1EC
MX1 und MX1HS
NO support for MX1/N bzw MX1/Multi
SW Download for cabs
MX21
MX31
Planned: maintenance of cab GUI
SW Download MXFU
Software maintenance for decoder
Firmware update MX62/63/64 MX69/690 MX82
Sound download in MX690  ©

3. © http://AMW.huebsch.at 2005
Installation
Download ZST from ZIMO WEB
Store it locally on the PC
Start the installation program  ©

4. © http://AMW.huebsch.at 2005
Backup Option
Backup Option
All replaces files may be backed up
ZST sets automatically a system restore point.  ©

5. © http://AMW.huebsch.at 2005
Shortcuts
ZST creates shortcuts
START menu above the „START“ button
Programs: programs tree
Desktop: on the background  ©

6. © http://AMW.huebsch.at 2005
Copy files
This takes about 15 to 60 seconds  ©

7. © http://AMW.huebsch.at 2005
Start ZST
Double click one of the shortcuts
Inside the program tree there is a ZIMO folder
Here you find the ZST shortcut
The subfolder GUI allows setting the ZST language
Inside ZST there is a language menu which allows changing the language dynamically  ©

8. © http://AMW.huebsch.at 2005
Start ZST
Welcome screen
Connect to MX1
Offline Modus to run the program without MX1  ©

9. © http://AMW.huebsch.at 2005
Search MX1 connection
MX1 is searched automatically
ZST sets the required parameters itself
Comms parameters are stored which allow quick reconnection  ©

10. MX1 laden MX1 properties are displayed 
Starting wit 2.12 the device ID is used to protect against loading wrong MX1 SW
Displays symbol photo of selected file ©

11. © http://AMW.huebsch.at 2005
MX1 reanimate
If wrong SW version was loaded
Download interruption through power failure
Select the desired file
Reanimate MX1
Power up the MX1
within 10 seconds  ©

12. MX21/ MX31 laden Select device group Search for device on can bus
Download 
Picture displays file content ©

13. © http://AMW.huebsch.at 2005
Emergency download
Cabs to a self check during power up, if an error is detected the device does not power up
It allows healing apparently dead cabs
MX21 stays dark, no LEDs
MX31 blinks red  ©

14. © http://AMW.huebsch.at 2005
Emergency Download
Only one device is allowed on CAN bus
Other devices would interfere communication on the bus
Some devices might get junk data loaded if the stay connected
So searching of devices in this case
Select desired file
Press emergency download  ©

15. © http://AMW.huebsch.at 2005
Decoder Update
Allows loading of new decoder firmware
Decoder may be installed in the loco
There are no other loads allowed.
Sounddecoder need to be disconnected before
MXDECUP required
Future sound decoder may be loaded as well with this device ©

16. © http://AMW.huebsch.at 2005
Decoder Update
Select serial port
Select decoder
English GUI planned for next release ©

17. © http://AMW.huebsch.at 2005
help
Starting with ZST 1.5 there is a windows help system
Explains usage and gives background information
Currently only German, translation is planned  ©

18. © http://AMW.huebsch.at 2005
Future expansion…
Integration of MXDECUP in ZST GUI
Multi lingual decoder update
Expansion and translation of help files
Download multi lingual MX31 GUI
Maintenance of MX1 memory
Backup & restore
Access to MX1 CVs
Maintenance of loco names in MX21 and MX31
Export and Import
Transfer of strings between cabs  ©

19. Danke für Ihre Aufmerksamkeit ©