1. VersaWeigh Customer Training
Operator
July 8, 2008

2. Operator Training
Overview
Why Checkweigh?
What are Weight Zones?

3. What are Weight Zones? Second Under Cutpoint Reference Weight
Second Over Cutpoint
On Weight
Zone 3
First Under Cutpoint
First Over Cutpoint
Under Weight Zones 1 and 2
Over Weight Zones 4 and 5

4. Operator Training Overview Why Checkweigh? What are Weight Zones?
Basic Mechanical Operation and Parts

5. Basic Mechanical Operation and Parts
Packages Approach the Checkweigher
Triggered by the photocell, packages are weighed individually.
Under and/or overweight packages are rejected.

6. Operator Training Overview Why Checkweigh? What are Weight Zones?
Basic Mechanical Operation and Parts
Do’s and Do Not’s of Checkweighing
Do keep the weightable area clean
Do not hit weightable with high pressure water or air
Do not apply side force to weightable
Do adjust system for smooth product transfers into/through and off of system
Do verify package weights are correct when ever starting a production run
Starting and Stopping Motors

7. Starting and Stopping Motors
Press the Motor Start/Stop Button

8. Operator Training Overview Why Checkweigh? What are Weight Zones?
Basic Mechanical Operation and Parts
Do’s and Do Not’s of Checkweighing
Starting and Stopping Motors
Overview of Weight Display Screen

9. Overview of Weight Display Screen

10. Operator Training
Product Programming
Operator Access / Logging In

11. Operator Access / Logging In
Press Login

12. Operator Access / Logging In
Select Browse.

13. Operator Access / Logging In
Select the User
Then “Done”.

14. Operator Access / Logging In
Enter the Password (If applicable)
Press the “Login” Button

15. Operator Access

16. Operator Training Product Programming Operator Access / Logging In
Selecting the Running Product

17. Selecting the Running Product
Press the “Select Product” Tab

18. Selecting the Running Product
Select the “Browse” Button

19. Selecting the Running Product
Select the Desired Product
Press the “Done” Button

20. Selecting the Running Product
Press the “Run Product” Button

21. Operator Training Product Programming Operator Access / Logging In
Selecting the Running Product
Selecting New, Copying and Deleting Products

22. Selecting New, Copying and Deleting Products

23. Operator Training Product Programming Operator Access / Logging In
Selecting the Running Product
Selecting New, Copying and Deleting Products
Viewing / Clearing Statistics

24. Viewing / Clearing Statistics
Press the Statistics Tab

25. Viewing / Clearing Statistics
Press to Save & Clear Stats
Press to Select Long or Short Term Stats

26. Graphs - Histogram

27. Graphs – Utilization

28. Graphs - Trend

29. Graphs – X-Bar-R

30. Graphs - Pie

31. Graphs - Yield

32. Operator Training Product Programming Operator Access / Logging In
Selecting the Running Product
Selecting New, Copying and Deleting Products
Viewing / Clearing Statistics
Editing Product Parameters

33. Editing Product Parameters
Press the “Select Product” Tab

34. Editing Product Parameters
Press the “Browse” Button

35. Editing Product Parameters
Select the Desired Product
Press the “Done” Button

36. Editing Product Parameters
Press
“Edit Product”

37. Editing Product Parameters

38. Operator Training Product Programming Operator Access / Logging In
Selecting the Running Product
Selecting New, Copying and Deleting Products
Viewing / Clearing Statistics
Editing Product Parameters
Editing Speeds

39. Editing Product Speeds
Select the “Speeds” Tab

40. Editing Product Filter

41. Operator Training Product Programming Operator Access / Logging In
Selecting the Running Product
Selecting New, Copying and Deleting Products
Viewing / Clearing Statistics
Editing Product Parameters
Editing Zone and Diverter Configuration

42. Editing Product Zone Assignments

43. Operator Training Product Programming Operator Access / Logging In
Selecting the Running Product
Selecting New, Copying and Deleting Products
Viewing / Clearing Statistics
Editing Product Parameters
Changing Weight Display to Deviation or Gross

44. Changing Weight Display to Net / Deviation / Gross
Press the “Display=” Button to change between Gross Weight & Deviation Weight

45. Operator Training
Viewing and Clearing Alarms

46. Viewing and Clearing Alarms
Select the “Alarms” Tab

47. Viewing and Clearing Alarms
Press the “Clear Alarms” Button

48. Operator Training
Calibrating the Product
Product Calibration

49. Product Calibration
Select the “Select Product” Tab

50. Editing Product Parameters
Press
“Calibrate Product”

51. Product Calibration Press Start Enter Calibration Weight
When Prompted, Pass the Package the Required Number of Times

52. Operator Training Calibrating the Product Product Calibration
Gray Zone Test

53. Gray Zone Test
Select the Gray Zone tab.

54. Gray Zone Test Press Start Pass Same Package 20 Times
Observe Gray Zone

55. Operator Training
Checkweigher Options
Selecting Language

56. Selecting Language
Press Menu

57. Selecting Language
Select Options

58. Selecting Language
Select Language
Press Weight Display

59. This concludes the operator training.
Any Questions???