1. Amplifier Project

2. Mix up with the soldering boards – due to the bank holiday and the disastrous attempts at the circuit boards, I have bought some ready made, but they have been delayed due to bank holiday Monday. Sorry!
Today –
1) Situation – write out the situation, and draw a nice picture.
2) Design Brief
3) Research – Questionnaire – Ask Questionnaire – Results
4) Specification

3. Situation
Electric guitars have solid bodies. If you pluck a string on an electric guitar that is not plugged in, the sound is barely audible, there is nothing to
amplify the string’s vibrations. To produce sound, an electric guitar senses the vibrations of the strings electronically and sends that electronic signal to an amplifier and speaker.
When playing the guitar it is important to hear the sounds generated. For this the guitar needs to be plugged into some form of amplification device. Traditional amplifiers tend not to be portable and those that are, still require some form of power supply.
There is a clear need for a small personal guitar amplifier that can be easily
transported with the guitar, that allows the guitar to be practiced.
Sony introduced the first portable cassette player in the late 1970s. Its founder Akio Morita regularly traveled by plane and he wanted to listen to music. He asked his engineers to adapt a small journalist tape recorder to play back through headphones. He liked the design and the “Walkman” was born.
Technology has since moved on, and the Ipod and other Mp3 players mean you can store over 10,000 tracks on one device. However, there is still no way that music can be shared so that friends can listen as well.
There is a clear need for a product that will enable the output from these devices to be played so that others
can share the music.

4. Design Brief
Using the situations that you have just decided upon, come up with a design brief that you are to follow for your chosen area.
The design brief is a short description that clearly states the aim
of the design project and in a few words states the kind of product that is needed.
For example, “Design a case” is not very helpful to a designer. “Design a case to hold a small amplifier circuit” gives the designer a clearer focus without applying restrictions

5. Research
You are to come up with 6 questions concerning your amplifier project. Write the questions down on the sheets provided and ask 10 people to complete it.
By using a questionnaire you are immediately discovering what the mass public want.
Think about questions such as
How big would you want it? Specify sizes for them to choose from, DON’T leave it open ended. Give 3 or 4 options
Would you want the speaker protected or uncovered? A simple tick box question.
Be Simple and ask What colour you would prefer the case to be? and give several options.

6. Research
Using the data collected from your questionnaire, you must now put 3 of the questions into visible data. This means it must go in the form of a chart. YOU WILL HAVE DONE THIS IN MATHS.
Bar chart -
Put an explanation next to each chart to explain what they are showing and how this will help you in your designing
Pie Chart -

7. Specification
Once you have a clear understanding of the problem, you can work
out the specification for your Amplifier. A specification is a list of things that the final design must do. A good specification will list the important features in order of importance.
Specifications are an important part of designing because they provide a check list against which you can review your ideas as you are working. They also give you something against which to evaluate your ideas and your finished product.
For example, ‘needs to hold a battery’ does not give the designer enough information. ‘The case needs to hold a PP3 battery and have easy access so that the battery can be changed’ is a clear statement without restricting the designer.

8. Ideas
Once you have written your specification, you are to complete a series of initial ideas for your casing. You need to consider things that are out of the ordinary, BUT are achievable.
For instance if you are doing the portable speaker for the Ipod, you may want to add an area for you to place your ipod. You may want the lead from the stereo jack to be constantly fixed so that the Ipod slots onto it, You may have different ideas on how to house the speaker.
Make sure that the four ideas on paper are detailed, coloured, neat, drawn with a ruler where necessary, and have notes around them. When it says notes this means a running commentary on your work.

9. Ideas Development
Measure all the separate components that are going to make up your Audio Amplifier e.g. speaker, circuit board, battery, etc. Work out the optimum space needed to contain the circuit.
Use a series of sketches to show how the sections of your Audio Amplifier are to be held in your case design.
Draw a series of initial ideas for a vacuum formed case to hold the Audio Amplifier circuit. Think carefully about the following:
a. How the circuit is to be held in the case.
b. How much space is required to house the circuit.
c. How to gain access to change the battery.
Present your ideas as a series of sketches, highlighting those you feel are the most interesting with colour.

10. Final Idea