1. SESSION 5: Cadence / EMA / Moog Workshop: Derived Outputs, Legacy ECAD Tool Conversion, and Constraint Manager for OrCAD Thu, Oct 18, :00 AM - 1:00 PM EDT

2. Agenda for Today
Derived outputs with integration to Teamcenter demonstration
Legacy ECAD Tool Conversion Discussion
Managing constraints in Cadence Allegro Design Entry CIS discussion and demonstration
2/16/2019

3. Cadence – Enterprise Integrate – TCE PLM
PLM System
Cadence
including CIS Parts database
Functions of
Enterprise Integrate
PLM Connector
Siemens Teamcenter
ECAD Connector
Build Data Model
Check-In
Check-Out
BOM management incl. Comparison of BOMs
Automated Derived Output creation and revision
Synchronize Parts bidirectional
External Part Management
Documentation (RoHS, PG&C)
Configurable Workflows
ECAD/ MCAD Collaboration
2/16/2019 3

4. Data Model in Teamcenter PLM
Definitions:
PCBA Part / Assembly Variants
- Different product variants as electronic assembly variant
- Project Documents / Files
- Design management
- Source for all assembly variants and PCB
- Variant independent schematic drawing
Assembly Documents / Files
- Variant schematic drawing
- Assembly plot - Paste Stencils
- Pick & Place files - Test Fixtures
- IPC-2581 (All CAD including AOI) / ODB++
- Selective Solder - Customized Assy Reports
PCB Part
- Bare board
Fabrication Documents / Files
- Gerber Files/ NC Drill - Fab DWG
- Flying Probe
- Reports (Customized/Skill, Out of box)
Purchased parts / electronic components
Electronic parts / components represented in the BOM (Bill of materials)
2/16/2019 4

5. Teamcenter ECAD Data Release and Revising
WIP (Work in Progress) milestone iterations can be pushed to Teamcenter (TCE) via INTEGRATE (integration UI)
Integration can accommodate how derived data is released either by ECAD interface or PLM workflow
Revising/ release is controlled by the companies workflow and processes around WIP and RTM (Release to MFG)
Example flow for a release
All data is pushed into TCE via INTEGRATE
The design container (Innovation Data) is released from Cadence to TCE through INTEGRATE
The PCB, Assy objects and derived outputs are automatically updated based on revision.
Through a TCE workflow, the PCB and Assy content is approved and released
When the project is checked out for a future revision, all pertinent revision codes and meta data are reflected in the CAD data set and outputs are automatically derived based on this future revision.
2/16/2019

6. ECAD/ MCAD Collaboration Cadence/ Teamcenter Integration
Enables IDF or IDX baseline exchange to/from PLM for communication with MCAD teams
Enables PCB creation by PCB Layout user later in the design process adding a board to the schematic project.

7. Demo – Derived Outputs with Cadence/ Teamcenter Integration
2/16/2019

8. Agenda Derived outputs with integration to Teamcenter demonstration
Legacy ECAD Tool Conversion Discussion
Managing constraints in Cadence Allegro Design Entry CIS discussion and demonstration
2/16/2019

9. ECAD Tool Summary
Discussion around which tools are within our universe
2/16/2019

10. Moog’s Conversion Process and Offer Improvements
Please describe Moog’s current process.
We understand that Moog is acquiring companies at a very high rate and each company has it’s own ecosystem – what is the process and timeline for onboarding a new organization
2/16/2019

11. EMA’s Approach to Design Translations
A ‘magic translator’ does not exist
The ‘magic’ in a translation is comprised of a several ingredients:
What tool are we dealing with?  Including the version
What is the scope of the project?  The scope always tends to start of as HUGE but through more discussion, it is refined pretty quickly to a much more manageable project
Are we looking to translate a library?  If so, how big is the library?  Do we need to bring the entire library over?  Are all parts built to the same specifications?
Are we looking to translate designs?  If so, how many designs?  Do they vary in complexity?  Is there a lot of reuse amongst designs?  Are there baseline designs that would provide a good starting point if we translated them first?
What timeline parameters are we working within?
2/16/2019

12. What’s is Our Secret Sauce
For some there are no secrets – translators are built into both Capture and Allegro. For others, it is a definite art, yet often times repeatable once we know what we’re dealing with.
2/16/2019

13. EMA’s Approach to Library Conversion
In 2016 EMA acquired a company in Huntsville, AL called Accelerated Design, known for a product that has been in the market for a couple decades – Ultra Librarian
Ultra Librarian is a 14M part library containing pre-built symbols, footprints, and 3D CAD Models – this library is being added to on a daily basis
Ultra Librarian is based on a proprietary, CAD-neutral library creation engine which has the ability to output parts based on multiple (20+) different ECAD package formats
As you can imagine, this can be incredibly useful in Library conversions. Customers will often times send us a list of the parts in the library done in the format of their legacy tool. We can then search the Ultra Librarian library and for all the parts contained within, output those parts to Capture and Allegro format. We typically don’t have 100% coverage, but it allows us to quickly identify what the gap is and then leverage technology like OrCAD Library Builder or ECAD MCAD Creator to generate the new geometries.
2/16/2019

14. Agenda Derived outputs with integration to Teamcenter demonstration
Legacy ECAD Tool Conversion Discussion
Managing constraints in Cadence Allegro Design Entry CIS discussion and demonstration
2/16/2019

15. Constraint Management in Capture CIS
Main purpose is a FRONT END schematic constraint manager/ designer
Robust features, the same as constraint manager in the Allegro PCB Editor (Moog Allegro Users should be familiar with this capability)
2/16/2019

16. Constraint Management in Capture CIS
Features
Capture Constraint Manager (Native to Capture CIS)
Constraint Designer EE (EMA Optional Product)
Simple spreadsheet interface 
Available Nov 2018
Yes
Support for electrical, physical, and spacing rules for differential pairs and other critical nets
Rules are added directly to the design database and stored within the Capture .DSN file
Portable / Teamcenter ready
Support for XNETS
Wizards and designers (DDR & Visual) No
Create layer stack-ups and layer sets
Constraint Compare (DSN to DSN)
Diff Pair Viewer
Front to Back Annotation
Netlist Only
Netlist/ Export to PCB
Back to Front Annotation
Back Annotation only
Import BRD/ Back Annotation
2/16/2019

17. Demo
Constraint Designer EE
EMA Optional Product
2/16/2019

18. Schedule of EMA/Cadence Capability Workshops
2/16/2019

19. Next Steps
Thank you