1. The Garage Assembly Instruction By Laser Dollhouse Designs

2. Step 1. locate the Base floor labeled 1A thru 1C
as seen in Figure 1
Figure 1
Step 2. Locate Walls labeled on tabs 1A thru 1C and insert into base slots 1A thru 1C as seen in figure 2.
Figure 2

3. Step 3. Locate garage door guide rails as seen in figure 3
Step 4. Glue guide rail by inserting protruding slots flush with wall 1A, open side of rails face inward. See figure 4
Figure 4
Step 5. Slide garage door from top into guide rail slots and check that the door slides up freely. See figure 5.
Figure 5

4. Step 6. Once garage door is in add three (3) top guide rail cross supports to keep garage door from coming out of slides. See figure 6
Figure 6
Figure 7
Step 7. Glue lower stairs together and add platform for second stair railing. See figure 7

5. Step 8. Add side rail to platform. Refer to figure 8.
Step 9. Glue second stair rail together and insert into second floor base prior to installing second floor. Refer to figure 9.
Figure 9

6. Step 10. Install second floor with stair rail to top of walls 1A thru 1C by aligning tab and slots. Refer to figure 10.
Figure10
Step 11. Install outer window frames. Refer to figure 11.
Figure11

7. Step12. Install Plexiglas to inside of openings in walls
Step12. Install Plexiglas to inside of openings in walls. See figures 12
Figure12
Step13. Install interior window frames. See figures 13
Figure13

8. Step 14. Install first stair platform under second stair as in figure 14

9. Step 15. Add door to opening and install interior door frame
Step 15. Add door to opening and install interior door frame. See figure 15
Figure15
Step 16. Install window frames to roof support wall 2A and install walls 2A and 2B to second floor. See figure 16
Figure16

10. Step 17. Install stair side top rails to second floor. See figure 17
Step 18. Install left and right side roof panels as in figure 18, the house is now completed.
Figure18

11. Laser Dollhouse Designs