1. Updating the Maps Step 2 Eclipse AVN726E / AVN76D
Updating the Eclipse Map Data

2. Select Support > Map Updates

3. Select AVN726E / AVN76D Detail

4. Updating the Maps Step 2 Eclipse AVN726E / AVN76D
Download two software programs to your PC
Sync Tool
Software for the SD Card to transfer files back & forth between your Device and PC
2. ToolBox
For your PC to manage the data

5. Step 1 Update is required before proceeding to Step 2
Scroll to the Step 2 Page
A minimum of 2 GB SD Card is required
Larger SDHC Cards are compatible but may require additional steps if you exceed the on-board memory capacity of the AVN (1.8GB) If necessary, see “How To Transfer Contents” in the FAQ Section at

6. Scroll down to Step 2

7. NaviExtras Map Update Software for SD Card & PC
1. Download NaviExtras SyncTool Software
UnZip File
Copy “Update” folder to a blank SD Card
2. Download NaviExtras ToolBox Software
Install ToolBox Software on to your PC

8. Download Sync Tool to PC Desktop – Unzip and transfer Updates Folder to blank SD Card.
Download Toolbox Software to PC

9. Download SyncTool

10. Download SyncTool

11. Download SyncTool
Unzip the Sync Tool File and Copy the “Updates” Folder to the blank SD Card

12. Collecting Device Information
Summary
Insert the SD Card with the Updates Folder into the AVN
Collect Device Information from the AVN
Return to PC & proceed to ToolBox Software

13. Collecting Device Information
Press Eject
Press Open
Place the SD Card into the device
Press Close

14. Collecting Device Information
On the Navi Screen Press “Menu”
Press “Settings”

15. Collecting Device Information
Press the Arrow to advance to Page 2

16. Collecting Device Information
Press “About”

17. Collecting Device Information
Press “Update”

18. Collecting Device Information
Press “Collect device information”

19. Collecting Device Information
Press “YES”

20. Collecting Device Information
IMPORTANT !
Do not interrupt power during the collection process
This process requires less than 15 minutes to complete
Please Note: Vehicle must be running or ACC ON without interruption
Upon completion, Press “OK”

21. Collecting Device Information
Press “Quit”

22. Collecting Device Information
Press “Yes”

23. Collecting Device Information
Remove the SD Card
Press “Continue”
The AVN will Reboot
Turn off the vehicle and return to the PC for Updating

24. Download Toolbox

25. ToolBox
Summary
Close all other programs and download ToolBox Software on PC
Install and Open the ToolBox Software

26. Open ToolBox
ToolBox requires an internet connection to communicate to the Naviextra’s Update Server

27. Registering Device on the update server
With the data collected, place the SD Card back into the PC
Toolbox will recognize this as a “Device” and register with the update server
Toolbox will then show “Device Connected”

28. The My Updates tab will show available updates for your device
Select My Updates

29. Select “Install”

30. Select “Yes” to create a back up of your current data before installing new content

31. The backup file name will be titled with the date or you can change the name for familiarity

32. The Back Up Process will take approximately 10 Minutes and will indicate progress and the time remaining

33. Once BU is complete press “Next”

34. If present, uncheck Fix for Navigation
Confirm that Latest Map Guarantee is checked
Select Apply

35. IMPORTANT !
Do not to turn off or suspend the PC or interrupt the installation wizard during the download process
Click “Apply”

36. Toolbox will begin downloading updates and provide a status of the progress and the estimated time before completed. (Slow internet connections require more time)

37. Download speed will vary depending on your internet connection
Download speed will vary depending on your internet connection. On average, the complete update download including POI’s is less than an hour

38. Once completed, select “Done”

39. Updating the AVN Summary
Transfer the SD Card to the vehicle with the New Data
Restore Device Information
Remove the SD Card

40. Updating the AVN Press Eject Press Open
Place the SD Card into the device

41. Updating the AVN
On the Navi Screen Press “Menu”
Press “Settings”

42. Updating the AVN
Press the Arrow to advance to Page 2

43. Updating the AVN
Press “About”

44. Updating the AVN
Press “Update”

45. Updating the AVN
Press “Restoring to the device”

46. Updating the AVN IMPORTANT !
Do not interrupt power during this process
This process requires about minutes
Upon completion, Press “OK”

47. Updating the AVN
Press “Quit”

48. Updating the AVN
Press “Yes”

49. Updating the AVN Press Eject and Remove the SD Card Press “Continue”
The AVN will Reboot
You have completed the Map Update Process

50. Confirm the New Maps
On the Navi Screen Press “Menu”
Press “Settings”

51. Confirm the New Maps
Press the Arrow to advance to Page 2

52. Confirm the New Maps
Press “About”

53. Confirm the New Maps
Press “Maps”

54. Confirm the New Maps You will recognize the newer map dates
Select Licenses for additional information

55. Updating the Maps Step 2 Eclipse AVN726E / AVN76D
Please Visit for additional support and FAQ