1. Prevent an accident- be safe and smart!
Band Saw Safety
Prevent an accident-
be safe and smart!

2. Where do you see the band saw in every day shopping?

3. Band Saw Information Band Saws come in many different sizes and styles
They are used to cut metals, woods, plastics, and foods

4. Band Saw Blade
Band saw blades are hooked facing downward towards the material you are cutting.
By design, band saw blades will hold the material you are cutting on the cutting table.
Blades are one continuous piece and come in various lengths from 8’ to 12’ and even bigger depending on the machine.

5. Lock Knob On/Off Switch Blade Guard Table Blade
Let’s identify the important parts of the Band Saw.
They are the on/off switch, table, blade guard, blade, and foot brake.
Table
Blade

6. Always wear your safety glasses
Always wear your safety glasses anytime you are using or are near power equipment.

7. Band Saw Safety
Your fingers needs to be at least 3-4” from the blade at all times.

8. Band Saw Safety
You must adjust the blade guard ¼” above the wood you are cutting.

9. 1/4” Adjust the blade… …guard’s height to 1/4”
The blade guard should be set so that it is 1/4 of an inch above the wood you are cutting.
…guard’s height to 1/4”

10. Do NOT put hands… …in line with the blade
Never put your hand in line with the blade. They should always be on either side of the blade four inches away.
…in line with the blade

11. Band Saw Safety Outer relief cuts. Cuts made to keep the inner shape
You must make “relief cuts” whenever you are making “tight” or small curved cuts. If the curves are extremely tight use the scroll saw to make the cut.
Outer relief cuts. Cuts made to keep the inner shape
Inner relief cuts. Cuts made to keep the outer shape

12. Cut curves by… …making relief cuts Step 1
You should cut curves by first making relief cuts in the wood.
As you can see in the picture, I have drawn the curve I want to cut and then drew a series of perpendicular lines to cut first.
…making relief cuts

13. Cut curves by… …making relief cuts Step 2
Next, I cut on those perpendicular lines which will give me room to move around with the blade.
This prevents the blade from twisting and possibly breaking.
…making relief cuts

14. Never back out of… …long cuts
Never back out of long cuts. This also has the possibility of bending or breaking the blade.
…long cuts

15. Band Saw Safety
If you are cutting round items, such as a dowel, us a V-Block. A round item will roll your fingers into the blade if it is not supported by the V-block

16. Band Saw Safety Keep all guards in place.
Use the yellow lock knob to loosen the Guard and adjust correctly

17. Band Saw Safety
Adjust the blade guards to within 1/8” to ¼” of the stock.
The Pinky Rule
Use the yellow lock knob to loosen the Guard

18. Band Saw Safety
Blade guards that are over ¼ inch above the work will lead to accidents and reduces the accuracy of your cut.
This is UNSAFE!

19. Band Saw Safety
Never disturb anyone while they are operating the band saw.
Always clean up scrap wood when you are done on the band saw.
This is a 1 person machine. Observe the Power Tool Safety Area.

20. Band Saw Safety You must always wear safety glasses.
You must never use band saw without instructor permission.
If the band saw breaks, shut the machine off in the safest manner. Let the instructor know immediately.

21. Danger Zone
The area directly to the right of the band saw is the danger zone
If the blade breaks, it may come out and injure some one
Immediately turn the machine off and move away
Danger Zone! The area directly to the right of the band saw is the danger zone. If the blade breaks, it may come out and injure someone.
If the blade does break, immediately turn the band saw off and move away from the machine. It will take several minutes for the fly wheel inside the band saw to stop.