1. Building a PeriodicTable
Intro and Assembly

2. Part One: Assemble the Outline
Step 1: Arrange the pages of the Periodic Table Outline
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12

3. Step 2: Cut pages 1 and 2 at the dotted lines (cut off the dots so they do not show).

4. Step 3: Overlap the left side of page 2 with the right side of page 1 (the thin solid line should not show).
Tape or glue.
Note: Glue sticks work well but you may want to also use transparent tape on the back side for added strength.

5. Step 4: Cut page 3 at the dotted lines
Step 4: Cut page 3 at the dotted lines. Overlap page 3 with the right side of page 2 (cover the thin solid line).
Tape or glue.

6. Step 5: Cut page 4 at the dotted lines
Step 5: Cut page 4 at the dotted lines. Overlap with the right side of page 3 to cover the thin solid line.
Tape or glue.

7. Step 6: Cut page 5 at the dotted lines
Step 6: Cut page 5 at the dotted lines. Overlap with the bottom of page 1 to cover the thin solid line.
Tape or glue.

8. Step 7: Cut page 6 at the dotted lines
Step 7: Cut page 6 at the dotted lines. Overlap with the right side of page 5 and the bottom of page 2 to
cover the thin solid line. Tape or glue.

9. Step 8: Cut page 7 at the dotted lines
Step 8: Cut page 7 at the dotted lines. Overlap with the right side of page 6 and the bottom of page 3 to
cover the thin solid line. Tape or glue.

10. Step 9: Cut page 8 at the dotted lines
Step 9: Cut page 8 at the dotted lines. Overlap with the right side of page 7 and the bottom of page 4 to
cover the thin solid line. Tape or glue.

11. Step 10: Cut page 9 at the dotted lines
Step 10: Cut page 9 at the dotted lines. Overlap with the bottom of page 5.
Tape or glue.

12. Step 11: Cut page 10 at the dotted lines
Step 11: Cut page 10 at the dotted lines. Overlap with the right side of page 9
and the bottom of page 6. Tape or glue.

13. Step 12: Cut page 11 at the dotted lines
Step 12: Cut page 11 at the dotted lines. Overlap with the right side of page 10
and the bottom of page 7. Tape or glue.

14. Step 13: Overlap with the right side of page 11 and the bottom of page 8.
Tape or glue.

15. Carbon Family Boron Family Nitrogen Family Oxygen Family Noble Gases
Step 14: Color the “Key to Element Families”. You will use this same color theme when coloring the
Element Flaps in part two. Note: you choose the colors.
Carbon Family
Boron Family
Nitrogen Family
Oxygen Family
Halogens
Alkali Metals
Alkaline Earth Metals
Noble Gases
Transition Metals
Super Heavy Metals
Rare Earth Metals
ActinideMetals
Key to Element Families
Color the key below and then color each Element on your Periodic Table
Color this box for each element H
Hydrogen 1
1.0079