1. Shibori Pillowcase
The Burrito Method

2. Step 1 Open the cuff & body fabric so it lays flat.
With right sides together, line up raw edges the long way.
Pin parallel to the raw edge.

3. Step 2 Fold cuff over the pins so both right sides are showing.
Evenly roll your body fabric up towards the cuff.

4. Step 3 Unfold cuff and wrap it around the rolled body
Matching raw edge of cuff together, change the parallel pins to perpendicular

5. Step 4
Following the right edge of the presser foot, sew the raw edges of the cuff that is pinned perpendicular. Backstitch in the beginning & end. Trim threads.

6. Step 5
Carefully pull out the rolled body fabric through one of the ends of the rolled cuff.
Iron the cuff so it lays flat.
Fold fabric with wrong sides touching & right sides facing outward.
Line up the cuff & body seam. Pin at that seam.
Pin the rest of the side & bottom of pillowcase

7. Step 6 Sew side & bottom following the edge of your presser foot.
Backstitch in beginning and end of sewing.

8. Step 7 Trim the seam in half Flip fabric with wrong sides facing out.
Press seam flat.
Following the ½” guideline on the throat plate, stitch the side & bottom seams that were previously sewn.
Backstitch in the beginning & end.
Trim the seam in half

9. Step 8 Flip fabric right side out & press flat.
YIPEEEEE you made yourself a wonderful pillowcase! BE PROUD 
Happy sleeping!