Presentation is loading. Please wait.

Presentation is loading. Please wait.

COMPARISON OF WELD METAL PROPERTIES OF C-Mn MULTI-RUN WELDMENTS CONTAINING TITANIUM - AT DIFFERENT LEVELS OF NITROGEN Fig.2- The actual measured tensile.

Published byBernice Hutchinson Modified over 5 years ago

Similar presentations

Presentation on theme: "COMPARISON OF WELD METAL PROPERTIES OF C-Mn MULTI-RUN WELDMENTS CONTAINING TITANIUM - AT DIFFERENT LEVELS OF NITROGEN Fig.2- The actual measured tensile."— Presentation transcript:

1 COMPARISON OF WELD METAL PROPERTIES OF C-Mn MULTI-RUN WELDMENTS CONTAINING TITANIUM - AT DIFFERENT LEVELS OF NITROGEN Fig.2- The actual measured tensile UTS. Fig.3- The predicted UTS using the measured values for the chemical composition. Fig.4- The predicted UTS using standardized values for the chemical composition. Fig.5- The actual measured toughness properties. Fig.6- The predicted toughness properties using the measured values for the chemical composition. Fig.7- The predicted toughness properties using standardized values for the chemical composition.

2 Measured UTS ( measured chemical composition)

3 Predicted UTS (using the measured composition)

4 Predicted UTS (using standardized composition)

5 Measured toughness properties (measured chemical composition)

6 Predicted toughness properties (using the measured composition)

7 Predicted toughness properties (using standardized composition)

Download ppt "COMPARISON OF WELD METAL PROPERTIES OF C-Mn MULTI-RUN WELDMENTS CONTAINING TITANIUM - AT DIFFERENT LEVELS OF NITROGEN Fig.2- The actual measured tensile."

Similar presentations

Metals and Alloys. Alloys Two definitions Combination of two or more elements Combination of two or more metallic elements Metallurgical Commercial.

Metals and Alloys. Alloys Two definitions Combination of two or more elements Combination of two or more metallic elements Metallurgical Commercial.
Fig. 4-1, p. 107. Fig. 4-2, p. 109 Fig. 4-3, p. 110.

Fig. 4-1, p Fig. 4-2, p. 109 Fig. 4-3, p. 110.
MAGNA M a g n a D i g i t e c h I n d i a P r i v a t e L i m i t e d METALLURGICAL PROPERTIES PREDICTION Comparison between simulation and actual Component.

MAGNA M a g n a D i g i t e c h I n d i a P r i v a t e L i m i t e d METALLURGICAL PROPERTIES PREDICTION Comparison between simulation and actual Component.
Unit 1 Lesson 4 GMAW Filler Materials. GMAW filler material Selection of the material that is to be manufactured into filler wire for GMAW is based on.

Unit 1 Lesson 4 GMAW Filler Materials. GMAW filler material Selection of the material that is to be manufactured into filler wire for GMAW is based on.
Stainless Steels Stainless steels are iron base alloys that contain a minimum of approximately 12% Cr, the amount needed to prevent the formation of rust.

Stainless Steels Stainless steels are iron base alloys that contain a minimum of approximately 12% Cr, the amount needed to prevent the formation of rust.
Nickel to Stainless Dissimilar Metal Welding

Nickel to Stainless Dissimilar Metal Welding
P.464. Table 13-1, p.465 Fig. 13-1, p.466 Fig. 13-2, p.467.

P.464. Table 13-1, p.465 Fig. 13-1, p.466 Fig. 13-2, p.467.
Fig. 11-1, p. 359. p. 360 Fig. 11-2, p. 361 Fig. 11-3, p. 361.

Fig. 11-1, p p. 360 Fig. 11-2, p. 361 Fig. 11-3, p. 361.
Table 6-1, p. 161. Fig. 6-1, p. 162 p. 163 Fig. 6-2, p. 164.

Table 6-1, p Fig. 6-1, p. 162 p. 163 Fig. 6-2, p. 164.
Strong & Tough Steel Welds M. Murugananth, H. K. D. H. Bhadeshia E. Keehan, H. O. Andr₫n L. Karlsson.

Strong & Tough Steel Welds M. Murugananth, H. K. D. H. Bhadeshia E. Keehan, H. O. Andr₫n L. Karlsson.
Understanding Transformations in Copper Bearing Low Carbon Steels Teruhisa Okumura Department of Materials Science and Metallurgy University of Cambridge.

Understanding Transformations in Copper Bearing Low Carbon Steels Teruhisa Okumura Department of Materials Science and Metallurgy University of Cambridge.
Figure 1.1 The observer in the truck sees the ball move in a vertical path when thrown upward. (b) The Earth observer views the path of the ball as a parabola.

Figure 1.1 The observer in the truck sees the ball move in a vertical path when thrown upward. (b) The Earth observer views the path of the ball as a parabola.
Chapter 6: The Periodic Table Section 1: Organizing the Elements.

Chapter 6: The Periodic Table Section 1: Organizing the Elements.
Chapter D2, Section 1 Elements combine to form compounds.

Chapter D2, Section 1 Elements combine to form compounds.
Section: Electron Configurations and Periodic Trends

Section: Electron Configurations and Periodic Trends
PRESENTED BY ILAMVAZHUTHI.C 1 Under the guidance of Mr.S.CHOKALINGAM M.E (Assistant professor) DEPARTMENT OF MECHANICAL ENGINEERING E.G.S.PILLAY ENGINEERING.

PRESENTED BY ILAMVAZHUTHI.C 1 Under the guidance of Mr.S.CHOKALINGAM M.E (Assistant professor) DEPARTMENT OF MECHANICAL ENGINEERING E.G.S.PILLAY ENGINEERING.
Define chemistry. Chemistry is the study of the composition, structure, and properties of matter, the processes that matter undergoes, and the energy.

Define chemistry. Chemistry is the study of the composition, structure, and properties of matter, the processes that matter undergoes, and the energy.
C.T.A.S. HIGH STRENGTH STEEL - YS 490 - 690 MPa Consumables optimisation for the welding of high strength steels Appendix 6 (p. 1/16)

C.T.A.S. HIGH STRENGTH STEEL - YS MPa Consumables optimisation for the welding of high strength steels Appendix 6 (p. 1/16)
Queen’s University Belfast Crest; Coat of Arms; Emblem.

Queen’s University Belfast Crest; Coat of Arms; Emblem.
Classification of Metals

Classification of Metals

Similar presentations

Ads by Google