1. H-BRAKE Hybrid Serie

2. H-BRAKE Hybrid Serie

3. H-BRAKE Hybrid Serie H-Brake HD 110.31/25 H-Brake HD 170.31/25

4. H-BRAKE Hybrid Serie H-Bride 110 Backgauge type G (E-Brake 35-130)
H-Bride 170 Backgauge type H (E-Brake 150)

5. H-BRAKE Hybrid Serie H-Bride 110 Backgauge type G (E-Brake 35-130)
H-Bride 170 Backgauge type H (E-Brake 150)

6. H-BRAKE Hybrid Serie

7. H-BRAKE Hybrid Serie

8. H-BRAKE Hybrid Serie

9. H-BRAKE Hybrid Serie

10. H-BRAKE Hybrid Serie

11. H-BRAKE Hybrid Serie
This new electro-hydraulic control is a revolutionary development compared to traditional hydraulic press brakes. This involves an electro-hydraulic system that combines the benefits of both control techniques.
A servo-motor with direct control ensures the efficiency and speed and the hydraulics ensure the power and durability.

12. H-BRAKE Hybrid Serie

13. H-BRAKE Hybrid Serie Benefits: Closed hydraulic system
Because all components per cylinder in this compact and closed system have been integrated and, therefore, oil pipes and tank are lacking, the risk of oil leakage is
extremely limited.
Another advantage of this closed system is the fact that the oil is not in contact with the outside air and, therefore, the system cannot be polluted, which guarantees a long life span of the oil.

14. H-BRAKE Hybrid Serie Benefits: Standard large gap
side Standards of 510 mm

15. H-BRAKE Hybrid Serie Benefits:
High energy efficiency (low powerconsumption)

16. H-BRAKE Hybrid Serie Benefits:
Extreme reduced noise development in all operating modes

17. H-BRAKE Hybrid Serie Benefits: Fast - increased performance .
Due to its high-dynamic Y-axis control, with lowering
and return speeds of 230 mm/sec, lower cycle times up to 30%
can be achieved than with traditional hydraulic press brakes.

18. H-BRAKE Hybrid Serie Benefits:
Considerably reduced tank volume (9 or 15 Liter per cylinder)

19. H-BRAKE Hybrid Serie Benefits:
Plug & Work - Reduced assembly and start-up times due to completely preassembled
Fast - increased performance up to 30% by reducing the cycle time (shorter ramp times)
Precise - up to 5 μm positioning accuracy
Up to 7,000 operating hours maintenance free
High energy efficiency (low powerconsumption)
Extreme reduced noise development in all operating modes
Piping free
Reduced temperature dependence (No oil cooler needed)
Considerably reduced tank volume (9 or 15 Liter per cylinder)
High reliability through compact, closed system

20. H-BRAKE Hybrid Serie Standard specifications • E-CONTROL EC10 control
• Control mounted on rotating arm on right side of machine
• Y1/Y2 axis CNC controlled
• X-axis CNC controlled
• R-axis CNC controlled
• Z1 and Z2-axis manually
• Wila NSCL-I MC PRO top tool adapter
• Wila NSCR-I MC PRO CNC controlled crowning
• Set of 2 support arms (300 mm)
• Programmable and integrated safety light screen
• Foot Pedal with "Hold To Run" function
• LED workspace lighting at the front and rear of the machine
• Electrical installation for power connection 3/N/PE 50Hz 230/400 VAC
• Machine equipped in accordance with the applicable CE standard
Accessories and options
• EC20 2D graphics CNC control
• CNC controlled Z axes
• Back gauge finger with dX-axis adjustment
• Various tool adapters with hydraulic clamping
• Mobile support arms
• CNC controlled bending aids
• E-Bend L Blue angle measuring system

21. H-BRAKE Hybrid Serie