1. Injection mold specification
Client
fuji
Model Name
Fuji-xerox
Part Name
Cover under l
Part No.
802b086490_k001
DFM
Ming L.

2. Integral Corrective Action List
ICAL
Page
OPEN POINTS
SOLUTIONS/ACTION
WHO 1 2 3 4
Plastic Flow Analysis
Waiting for confirmation.
Parting _ line-1 5
Parting _ line-2 6
SLIDE 7
SLANT 8
MODIFY1 9
MODIFY2 10
MODIFY3 11
MODIFY4 12 13 14 15
I C A L
Integral Corrective Action List
1-Date of opening (all dates in2005)
2-Date of beginning of action
3-Date foreseen for validation
4-Date of validation (closing)
DFME Follow-up issue

3. Plastic Flow Analysis
Side gate

4. Parting _ line-1
Parting-surface

5. Parting _ line-2
(right&left)

6. SLIDE

7. SLANT

8. Slide steel is too thin,suggest modify it as view A.(RIGIG&LEFT)
0.5
SLIDE
Slide steel is too thin,suggest modify it as view A.(RIGIG&LEFT)
(REDUCE PLASTIC)
View A

9. The grid surface(all around) has no draft . Suggest reduce
MODIFY2
The grid surface(all around) has no draft . Suggest reduce
plastic 2º to release mold.

10. All of green surfaces have no draft.Suggest reduce plastic to
MODIFY3
All of green surfaces have no
draft.Suggest reduce plastic to
release mold as view A.
REDUCE PLASTIC
VIEW A

11. All of red surface can’t texture because
MODIFY4
All of red surface can’t texture because
of it just have 1º draft on slide side.