1. Engineering - potential areas for action
ENGINEERING DEPARTMENT
Design Team EL
Design Team
C&I
Software Team
Commissioning Team
Bogusław Osys

2. Engineering - potential areas for action
ENGINEERING DEPARTMENT
Design Team EL
DESIGN:
SIVACON switchgear designing
protection cabinets MCC with control devices: Simocodes, Sinamics, Softstarters
LCC designing for HV installations
electrical installations (choice of cables, ladders, trays and other equipment)
EXECUTION
project supervision
participation in commissioning
as build documentation
OTHER information:
team counts 4 engineers
standard tool is an EPLAN Electrical P8
Design Team
C&I
Software Team
Commissioning Team
Bogusław Osys

3. Engineering - potential areas for action
ENGINEERING DEPARTMENT
Design Team EL
DESIGN:
Control & Instrumentation designing:
process instrumentation with digital communication or analog signals
PLC (Siemens, Rockwell), IO cards, communication processors
automation installation (cabling, layout with cable tray)
topology of communication, fiber optic
coordination of designing work
EXECUTION
project supervision
participation in commissioning
as build documentation
OTHER information:
team counts 4 engineers
standard tool is an EPLAN Electrical P8
Design Team
C&I
Software Team
Commissioning Team
Bogusław Osys

4. Engineering - potential areas for action
ENGINEERING DEPARTMENT
Design Team EL
SOFTWARE:
PLC programming:
SIEMENS - S5 to S7, S7-200, S7-300, S7-1500, S7-400
Rockwell (A-B) - SLC500, MicroLogix1200, Compact Logix 1769-L32E, Control Logix 5550
HMI, SCADA Visualization – WinCC, Asix, RSView
Process Control System SIMATIC PCS7
Reporting System, MES System
servers, engineering and operation stations
coordination and integration of programming
EXECUTION
system commissioning
optimalization
OTHER information:
team counts 7 programmers
standard tools are Step7, TIA Portal, RsLogix, Panel View.
Design Team
C&I
Software Team
Commissioning Team
Bogusław Osys

5. Engineering - potential areas for action
ENGINEERING DEPARTMENT
Design Team EL
COMMISSIONING:
parameterization of frequency converters SINAMICS
parameterization of SIMOCODE devices
SIVACON commissioning on site
protection testing
IAT / FAT / SAT execution
participation in start-up automation cabinets / switchgears / instrumentation
EXECUTION
measurement and testing of installations, loop testing,
start-up and diagnostic of communication
COLD and HOT commissioning on the site
participation in process optimalization
OTHER information:
team counts 2 engineers
Design Team
C&I
Software Team
Commissioning Team
Bogusław Osys

6. Engineering - potential areas for action
ENGINEERING DEPARTMENT
Design Team EL
THE END
Thank You very much 
Design Team
C&I
Software Team
Commissioning Team
Bogusław Osys