1. EPC3000 Controllers Helping deliver an efficient and secure process Maintain the highest standard of production quality and ease your cybersecurity worries
Confidential Property of Schneider Electric

2. How do I start using my EPC3016, EPC3008, EPC3004?
Connect a power supply as described in the Installation and Wiring Sheet,
Every EPC3000 is dispatched with a printed copy of the Installation and Wiring Sheet
Or you can Download it from the Eurotherm web site
/temperature-controllers
Confidential Property of Schneider Electric |

3. After powering up, use the Quick Code to select your required configuration
Quick Codes are described in the Installation and Wiring Sheet. They provide preconfigured functionality.
Codes are entered via the front panel. Work out the code you want before starting to enter it. Enter by using the Up and Down keys – press the Scroll Key between characters At the end it will say EXIT – press the UP key to select SAVE
Eg.
Set 1 = 1K3xx means PID Heat Only, using a K type thermocouple , ranged 0 – 400 Deg C
Set 2 = xPWxx means the user can use the 1st digital input to select between 2 setpoints (P in the 2nd char), and can use the 2nd digital input to Acknowledge Alarms (W in the 3rd character)
Quick code entry is only relevant for a device that was ordered unconfigured.
Confidential Property of Schneider Electric |

4. Using the front panel
Use the Installation and Wiring sheet for details of the front panel.
There are several recordings you can watch to learn more See the next slides for details
Confidential Property of Schneider Electric |

5. Where to find further information
In addition to the Installation and Wiring sheet there is a reference manual, and there are many MP4 files and PowerPoints to help you.
They are available from the Eurotherm website or via YouTube
Select the appropriate one you need. It is recommended that you initially view them in the following order :-
How to Use the front panel.
How to enter a passcode via the front panel to access protected parameters.
How to Acknowledge an Alarm via the front panel.
How to Alter Parameters via the front panel eg Tuning Values.
How to Select AutoTune via the front panel.
How to Reset – to enter a new Quick Code.
How to Change the Passcode via the front panel
How to Set Up Communications between an EPC3000 and a PC so that iTools can be used
These are a mixture of PowerPoints and MP4 files. Continued on next slide.
Confidential Property of Schneider Electric |

6. Further information,
Additional “How To …” training demonstrations.
How to Use iTools to Create a Backup Clone File, Scan, and Connect to an EPC3000
How to Use iTools to Configure an Alarm in an EPC3000 configuration
How to use iTools to determine which hardware modules are fitted
How to use iTools to view and edit the PID and Autotune parameters
How to use iTools to allow access to parameters via the front panel
How To Use iTools to Configure the Passcodes
How to Use iTools to Configure a Program eg to Ramp a Temperature Setpoint over a Specific Profile
How to Configure a Program via the front panel .
Continued from previous slide
Confidential Property of Schneider Electric |