1. CEN/TC 12 and ISO TC67 SC4 Plenary meeting
ISO/TC 67/SC 4 N 257 R
CEN/TC 12 and ISO TC67 SC4 Plenary meeting
8/9 Mai 2003
Point 7

2. CEN TC12 AND ISO TC67 SC4 I) Common work programme
ISO/CD
ISO/CD
ISO/DIS
ISO/CD
ISO/DIS 13626
ISO/DIS 14693
ISO/CD WI WI WI WI WI WI WI
8/9 Mai 2003
Point 7

3. CEN TC12 AND ISO TC67 SC4 I) Common work programme (2)
ISO AWI 15993
ISO DIS
ISO WD 10428
ISO WD 10431
ISO AWI 10432
ISO WD
ISO DIS
Waiting for decision of SC4 WI WI WI WI WI WI
8/9 Mai 2003
Point 7

4. CEN TC12 AND ISO TC67 SC4 I) Common work programme (3)
ISO WD
ISO AWI
ISO/WD 16389 WI WI WI
8/9 Mai 2003
Point 7

5. CEN TC12 AND ISO TC67 SC4 II) Common published standards(1)
EN ISO 10432:1999 : Subsurface safety valve equipment – Specification
EN ISO :1999 : Design and operation of subsea production systems- Part1 : General requirements and recommendations (in revision)
EN ISO :1999 : Design and operation of subsea production systems- Part4 : Subsea wellhead and tree equipment.
EN ISO 13534:2000 : Standard for inspection, maintenance, repair and remanufacture of hoisting equipment –Requirements and guidelines.
EN ISO 13535:2000 : Drilling and production Equipment – Hoisting Equipment.
8/9 Mai 2003
Point 7

6. CEN TC12 AND ISO TC67 SC4 II) Common published standards(2)
EN ISO : 2000 : Design and operation of subsea production systems- Part 2 : Flexible pipe systems for subsea and marine applications
EN ISO : 2000 : Design and operation of subsea production systems- Part 3: Through flow line systems (TFL)
EN ISO : 2001 : Drilling and production equipment – Wellhead and Christmas tree equipment. (ATTENTION PROBLEME)
EN ISO : 2001 : Downhole equipment – Progressive cavitypump systems for artificial lift – Part 1 : Pumps.
8/9 Mai 2003
Point 7

7. CEN TC12 AND ISO TC67 SC4 II) Common published standards(3)
EN ISO : 2001 : Drilling and production equipment – Drill through equipment.
EN ISO : 2001 : Downhole equipment- Packers and bridge plugs.
EN ISO : 2001 : Downhole equipment- Lock mandrels and landing nipples.
EN ISO : 2002 : Drilling and production equipment – Marine drilling riser couplings.
8/9 Mai 2003
Point 7

8. CEN TC12 AND ISO TC67 SC4 III) Main problem
CEN TC12 voted in Brussels in his last plenary meeting the following resolution:
Resolution 19 (Brussels-2003)
Further to the information received through BSI (referring to a letter from API, dated on regarding EN ISO 10423:2001), CEN TC12 requests its secretariat:
To inform CEN/CMC that there are potential problems with the technical content of this standard;
To request ISO/TC67 to provide precise information stating what are the exact errors in the document;
To request ISO/TC67 to prepare a Technical Corrigendum with the collaboration of ISO/CS, for quick implementation at the CEN level.
8/9 Mai 2003
Point 7