1. Where Do Grades Come From?
Grades originate within teachers’ Gradebooks
At the end of a marking term, grades are stored from Gradebooks to Historical Grades on the administrative side of PowerSchool
The grades stored in Historical Grades are the basis for report cards, transcripts, GPA’s and academic recognition

2. Where Do Grades Come From?
Gradebooks are specific to individual teachers
Only teachers assigned to a section may alter the grades within the Gradebook; only the Lead Teacher may edit the Gradebook setup
Administrative staff may access, view and run reports from PowerTeacher Gradebooks, but cannot save any changes

3. Understanding Grades
There are currently three separate Grade Scales in use at BASIS Campuses:
Simple A-F: Lower School (K-7) letter scale; GPA is calculated on the underlying percentage; No +/- grades
Qualified A-F: Upper School (8+) letter scale; 4.0 and Weighted GPA scale; A-F with +/-
SPNU: Courses using this scale do not count toward student GPA; Upper and Lower School, but most common in Grades PK-6

4. Understanding Grades Lower School Grades PK-7 Upper School Grades 8-12
Course Work
End of Year Average & Final Exam
Grading Period 1 G1
Grading Period Average A2
Final Grade F2
Grading Period 2 G2
GP3 Course Work W3
GP3 Final G3
Pre-Comps P3
Grading Period 4 G4
Grading Period 5 G5
Comprehensive Exam C2
Upper School Grades 8-12
Course Work
End of Year Average & Final Exam
Trimester 1 T1
Trimester Average A1
Final Grade F1
T2 Course Work W2
Trimester 2 Final T2
Pre-Comps P2
Trimester 3 T3
Comprehensive/ Final Exam C1

5. Setting Weights in Gradebook
As assignment information is entered Gradebooks calculate cumulative grades.
Since there are many different ways to calculate grades, Grade Setup is an essential step at the start of the year.
Each Reporting Term is capable of calculating a unique grade, so each Term must be set up appropriately.
Each Term can calculate grades in one of 3 ways:
Total Points
Term Weights
Category Weights
NOTE: Image shows Reporting Term Codes

6. Setting Weights in Gradebook
To set up terms, click on the Grade Setup tab in the Gradebook.
Click on the arrow next to the Start date.
Then select the appropriate type of weighting for that Term.

7. Gradebook Setup
Total Points: If F1 is calculated using Total points, the gradebook will sum all points earned between the start and end date of the term, and divide them by the total number of points possible for the term.
Term Weights: Applying term weights tells Gradebook to calculate F1 as a weighted average of the terms whose start and end dates fall within F1’s date range.
Category Weights: This setting makes F1 the weighted average of different assignment categories created by the teacher. This is appropriate for individual terms (e.g. Grading Periods, Trimesters and exams with Common and Native components).

8. Gradebook Setup Terms can be divided into two categories:
Individual Terms: Terms where the final grade is the direct result of the assignments (tests, quizzes, homework, etc.) given to students within the assigned date range.
Final grades for individual terms are determined by Category Weights or Total Points.
Cumulative Terms: Terms with final grades calculated as a weighted average of other terms.
Final grades for cumulative terms are usually determined by Term Weighting.

9. Gradebook Setup - Cumulative Terms
T2 and G3 are cumulative terms calculated as averages of term Course Work (W2/W3) and the Pre-Comp Exam Score (P2/P3).
T2 is calculated as 70% W2 and 30% P2.
G3 is calculated as 50% W3 and 50% P3.
Classes without Pre-Comps are 100% of the Course Work term. This can be set by changing the W-term to 100% and the P-term to 0% or leaving the 50/50 default and ensuring no data is entered into the Pre-Comp term.
Lower School Grades PK-7
Course Work
End of Year Average & Final Exam
Grading Period 1 G1
Grading Period Average A2
Final Grade F2
Grading Period 2 G2
GP3 Course Work W3
GP3 Final G3
Pre-Comps P3
Grading Period 4 G4
Grading Period 5 G5
Comprehensive Exam C2
Upper School Grades 8-12
Course Work
End of Year Average & Final Exam
Trimester 1 T1
Trimester Average A1
Final Grade F1
T2 Course Work W2
Trimester 2 Final T2
Pre-Comps P2
Trimester 3 T3
Comprehensive/ Final Exam C1

10. End of Year Average & Final Exam End of Year Average & Final Exam
Gradebook Setup - Cumulative Terms
A1 and A2 are cumulative terms calculated as averages of the Grading Periods (G1-G5) or Trimesters (T1-T3).
Classes without Comps or Final Exams should end up with A1 or A2 grades equal to the Final Grade.
Lower School Grades PK-7
Course Work
End of Year Average & Final Exam
Grading Period 1 G1
Grading Period Average A2
Final Grade F2
Grading Period 2 G2
GP3 Course Work W3
GP3 Final G3
Pre-Comps P3
Grading Period 4 G4
Grading Period 5 G5
Comprehensive Exam C2
Upper School Grades 8-12
Course Work
End of Year Average & Final Exam
Trimester 1 T1
Trimester Average A1
Final Grade F1
T2 Course Work W2
Trimester 2 Final T2
Pre-Comps P2
Trimester 3 T3
Comprehensive/ Final Exam C1

11. Gradebook Setup - Cumulative Terms
F1 and F2 are cumulative terms calculated as averages of the GP or Trimester Average (A1/A2) and the Comp or Final Exam score (C1/C2).
F2 is calculated as 50% A2 and 50% C2.
F1 is calculated as 50% A1 and 50% C1 for Comp classes. Non-Comp course weights are set by the teacher.
Classes without Comps are 100% of the GP or Trimester Average. This can be set by changing the A-term to 100% and the C-term to 0% or leaving the 50/50 default and ensuring no data is entered into the Comp term.
Lower School Grades PK-7
Course Work
End of Year Average & Final Exam
Grading Period 1 G1
Grading Period Average A2
Final Grade F2
Grading Period 2 G2
GP3 Course Work W3
GP3 Final G3
Pre-Comps P3
Grading Period 4 G4
Grading Period 5 G5
Comprehensive Exam C2
Upper School Grades 8-12
Course Work
End of Year Average & Final Exam
Trimester 1 T1
Trimester Average A1
Final Grade F1
T2 Course Work W2
Trimester 2 Final T2
Pre-Comps P2
Trimester 3 T3
Comprehensive/ Final Exam C1

12. Weighting Cumulative Terms
NOTE: Image shows Reporting Term Codes
To assign the weights to a term, enter values into the Weight column so that the percentages equal the weighted percentages you want to use.
The example above uses 100/100 to get a 50%/50% split. You could accomplish the same thing by entering any two equal values into the Weight column. If you were wanting to apply a 70%/30% weighting, you could enter 70 and 30 or 7 and 3, and apply the correct weight.
Notice that A1 has a drop-down arrow to the left. Keep this Term closed and set the weight for A1 by clicking the arrow on the list of Reporting Terms above.
After assigning your weights, click Save.

13. Weighting Individual Terms
Most Terms are the direct result of the coursework assigned to students. Most teachers prefer to create Assignment Categories and have the Gradebook calculate the overall grade for the Term.
Before teachers can add Assignments, they must add Assignment Categories.
Go to the Scoresheet tab and select Tools dropdown menu at the top of the screen, select Categories, or from the Categories box in the lower, left-hand corner of the screen hit the plus button.

14. Adding Categories
Teachers can fill in the information that they would like for their Categories.
Name and Abbreviation can be displayed on reports
Assigning different colors to different categories helps distinguish assignment types within the Scoresheet view
Points possible can be adjusted as assignments are created; Points Possible just assigns a default value
Since we do not use student or parent logins, Publish Assignment categories are not as relevant

15. Weighting Individual Terms
In the same way that you did to set up the Cumulative Terms, navigate to the Grade Setup tab and click on the arrow next to the name of the Individual Term that you want to set up.
Select Category Weights below
And the plus symbol next to Add Category below that:
It is important that teachers verify that the proper weighting has been applied to ALL individual and cumulative terms.

16. Weighting Individual Terms
Use the check boxes to select the Categories you wish to include in your course.
Apply the appropriate Weight to the appropriate Category and click Save.

17. Creating an Assignment
New Assignments can be entered by pressing the plus symbol on the Scoresheet or Assignments tab.

18. Name and Abbreviation appear on various reports
Category determines the group with which the assignment is associated. Make sure to pick a category that has weight assigned to it. Otherwise the assignment will not factor into the grade.
Points Possible serves as the denominator when determining student percentages on an assignment
Date Due determines which Term an Assignment falls into

19. Incompletes vs Blank Grades
Sometimes a student is missing one or more critical assignments needed to determine a fair grade for a term. In this case the teachers can issue either an Incomplete or a blank grade.
Incompletes calculate into cumulative terms. For instance, if a student receives an Incomplete in GP5, both the A2 and F2 scores will calculate using the percentage attached to the Incomplete grade. For this reason, Incompletes are only used as a temporary placeholder to be replaced by a permanent grade at a later date.
If a student missed too significant a portion of a term to receive a fair grade, the teacher should exempt the student from any completed assignments (type EX over the completed score), and the Final Grade should read as a blank:

20. Total Points
Within the Gradebooks, Terms default to Total Points. It is important to make sure that this is intentionally applied, and not leftover from the default or because a change to Category or Term Weights went unsaved.
Some teachers prefer not to categorize assignments, but rather weight the assignments they give by assigning higher/lower point values. Total Points is the way to do that.
At the end of the term, the student’s final grade is the total number of points earned/the total number of points possible.

21. Total Points
Teachers may choose to use Total Points, but should also be aware of the potential skewing of grades if points are unequally distributed between marking periods.
Consider the example: T1 T2 T3
Percent 91 94 93
Grade A- A
Total Points
200
100
Final Grade
92.25
If the student averages the three grades on his or her report card he or she will expect an A (92.67), but because twice as many points were given in the period with the lowest grade, the student actually earns an A-.