1. Dave McComas on behalf of the ISʘIS Team
introduction
SPP Science Working Group
in D.C. at the Smithsonian

2. Outline
ISʘIS Team
Hardware Status
Calibration Results
Summary

3. ISʘIS Team

4. Hardware Status – EPI-Lo

5. EPI-Lo Status – FM Event Board
Flight FPGA burned and installed
Completed FM acceptance testing
Ready for integration into the top assembly

6. EPI-Lo Status – FM Power Board
Completed FM acceptance testing
Removing excess parylene coating

7. EPI-Lo Status – Anode & Energy Bds
Four FM Anode Boards complete, acceptance tested, and ready for next assembly
Two FM Spare Anodes built
Fifteen FM Energy Board / SSD Assemblies complete, acceptance tested, and ready for next assembly (8 FM and 7 FM Spare)
EPI-Lo FM Anode Board, back side
EPI-Lo FM Energy Boards, back side

8. EPI-Lo Status – FM Sensor Wedges
2 FM Spare Wedges Assembled and Calibrated at LBNL
3 FM Wedges Assembled and vacuum-tested with sources
11 upper wedge subassemblies complete
9 MCP assemblies complete and tested

9. EPI-Lo Calibration at LBNL
Completed Calibration of 2 FM Spare Sensor Wedges at LBNL in March 2016

10. Hardware Status – EPI-Hi

11. EPI-Hi Status – Electronics Boards
Ebox assembled with all FM boards
LVPS, Bias Supply, DPU, LET1, LET2, and HET Boards
All FM boards populated with FM parts (except FPGA)
FM Flex-Circuits to Telescopes

12. EPI-Hi – FM Telescopes All FM Telescopes fabricated
Minor mechanical updates incorporated into LET1 & LET2 and being completed on HET telescope bodies
Progress made on improved screening to find detector wire-bonds issues (breakage on one extreme, sagging on the other)
EMI closeout of cabling to telescopes is behind schedule but parts should be complete mid-October

13. EPI-Hi Team – TAMU Calibration
Performed Calibration at Texas A&M
Test Dates: June 14-18, 2016
K500 Cyclotron: N14, Ne20, Ar40 and Kr78 beams
56 hours beam time
LET1 A, HET A and LET2 tested
K150 Cyclotron: Proton beam
13 hours beam time
HET A and LET1 A tested
14 ISʘIS team members supported the test at TAMU over a 13 day period.
Many other involved with pre-test preparations.
24/7 coverage June 13-18

14. EPI-Hi Team – MSU Calibration
Performed Calibration at Michigan State University
Test Dates: July 19-21, 2016
K1200 Cyclotron S2 Vault – SEE line
Ni58 beam, 160 MeV/nucleon
44 hours beam time
LET1 A, LET1 B, HET A and LET2 tested
14 ISʘIS team members supported the test at MSU over an 8-day period
Many others involved with pre-test preparations.
24/7 coverage July 19-21

15. Summary Almost all ISʘIS FM hardware is complete
Integration and Testing has gone well
Extensive calibrations performed on FM hardware to ensure performance requirements are met
Full FM Integration and Testing expected to complete in October 2016
Pre Environmental Reviews being scheduled for October 2016
Projected delivery to spacecraft in January 2017