1. Android Tablet Diagnostic Tool A501 & G100W

2. Start the Diagnostics Application
After updating the unit using the ServiceROM please go to the applications tab and start the ACTP application (if not started automatically after update).

3. Select tests Select the tests you want to execute on the tablet.
Please don´t use „5. Back Camera“ Test.

4. Test item – 1.Multitouch (Touch Panel)
Use your finger to touch the yellow area as above screen and draw it along
the square. The result is pass if you fill all yellow area then it jumps back to
main menu.

5. Test item – 2.Touch Linearity (Touch Panel)
User your finger touch the yellow area as above screen and draw it along
the “X”. The result is pass if you fill all yellow area then it jumps back to main menu.

6. Test item – 3.RGB (Display)
Finish
Tap screen, the colour on the display changes. Use this test item to see
any abnormal lines or dead pixels on LCD screen.

7. Test item – 4.HWKeys (Keys)
Press volume up, volume down and lock keys to verify that all keys work.
Color changes to green means key function works.

8. Test item – 5.Back Camera
Back camera test brings up issue. Please use internal camera software to test.

9. Test item – 6.Speaker
You´ll hear a loud noise from speaker. Starting on left speaker and changing to right speaker.

10. Test item – 7. Front Microphone
Tap screen to start the test. The microphone will be opened. You´ll see “recording...” sounds will now be recorded. A few seconds later the replay of the recorded sound will start.
Afterwards select “Pass” if the recording was ok.

11. Test item – 8.Back Micro
Tap screen to start the test. The microphone will be opened. You´ll see “recording...” sounds will now be recorded. A few seconds later the replay of the recorded sound will start.
Afterwards select “Pass” if the recording was ok.

12. Test item – 8.Front Camera
To take a picture click on “Photograph”.
When the taken picture is ok, you can “pass” it in the next step.

13. Test item – 9.SD Card
Insert a micro SD card into the device. The test will start automatically.
Please press “Pass” if test was successful.

14. Test item – 10.Vibrator
The vibrator test will cause the unit to vibrate three times.
When the test was successful please select “Pass”.

15. Test results
At the end you´ll get an overview about the test results.

16. THANK YOU