1. Mechanical Ventilation in newborns
By:
Dr.behzad barekatain ,MD
Assistant professor of pediatrics
Neonatologist
Isfahan university of medical scienses

2. Mechanical ventilation can be achieved through the use of intermittent negative-pressure or positive-pressure devices.
Negative-pressure ventilators are mainly of historical interest.
Negative pressure respirators can provide assisted ventilation without the need for endotracheal intubation; thus trauma to the airway is avoided and the risk of infection is reduced.
They can also provide effective continuous negative pressure.‘
The only commercially available equipment for newborns, the Isolette Respirator (Airshields, Inc., Hatboro,PA, USA), is no longer manufactured.
In the early 1990s, this form of ventilation experienced a minor resurgence of
interest because.
The Isolette Respirator has not been proven effective in the ventilation of VLBW
infants, who represent the largest group of the NICU population.

3. Origins of mechanical ventilation
The era of intensive care medicine began with positive-pressure ventilation
Negative-pressure ventilators (“iron lungs”)
Non-invasive ventilation first used in Boston Children’s Hospital in 1928
Used extensively during polio outbreaks in 1940s – 1950s
The iron lung created negative pressure in abdomen as well as the chest, decreasing cardiac output.
Disorders characterized by systemic effects of M protein, and direct effects of bone marrow infiltration
Common examples of methylation-induced silencing:
Imprinted genes (Prader-Willi, Angelmann Syndromes)
Inactivated 2nd X chromosome in females
DNA methylation results in histone deacetylation, compacted chromatin, and repression of gene activity
Methylation can have a profound effect in tumorigenesis by silencing tumor suppressors
Iron lung polio ward at Rancho Los Amigos Hospital in 1953.

6. Draeger Medical designed “Draeger Pulmoter”

7. Flow or pressur sensore
AIR O2
bLENDER
FLOWMETER
O2 SENSOR
Pressur control
popoff
Flow or pressur sensore
Humidifier
Warmer
Expiratory
limb
To patient

8. Adjustable Dual Flow System
Base Flow (4-6 minute ventilation)
Controls flow for spontaneous effort
Inspiratory Flow (2-3 base flow)
Adjusts flow for delivery of pressure
Effects Rise Time
Base flow is adjusted to provide sufficient flow for spontaneous breaths
Inspiratory flow is adjusted to provide the optimal pressure rise for each patient

9. Goals of Mechanical Ventilation
.Achieve and maintain adequate pulmonary gas exchange
.Minimize the risk of lung injury
.Reduce patient work of breathing
.Optimize patient comfort
The BEAR 750psv addresses each of these goals

10. Two groups of ventilation: Conventional: High-frequency:
deliver physiologic tidal volume
High-frequency:
deliver tidal volume less than physiologic dead space
Classification of conventional ven:
Volume-target ventilator
Pressure-target ventilator

12. CONTROL (fixed)VARIABLE (Modalities) Volume: in volume-controlled ventilator Pressure:in pressure-preset ventilator PHASE (changeable)VARIABLE (Modes) Triggeringاغازگر :شروع دم را کنترل میکند * .time triggering>>>>>in IMV mode (ALS,IVH) .patient triggering>>>>in SIMV OR A/C mode(sensor) Limiting & controlling* محدود کننده فاکتورهای تنفسی یا حداکثر مجاز :وقتی ونتیلاتور به حداکثر مجاز آن متغییر برسد دریچه های تخلیه را باز میکند. Cycling*پایان دم را کنترل میکند .felow-cycled .Time-cycled .Pressure-cycled

13. Classification (the Basic Questions)
A. Trigger mechanism
What causes the breath to begin?
B. Limit variable
What regulates gas flow during the breath?
C. Cycle mechanism
What causes the breath to end? B C A
All ventilators can be classified as to what begins the breath, what is controlled or limited during the breath and what terminates inspiration.

14. Cycling Vs. Limiting Limited Cycled Pressure Pressure Time Time
Note that a pressure limited breath maintains the pressure throughout inspiration
A pressure-cycled breath goes to exhalation as soon as the set pressure is reached in the ventilator circuit.
Time
Time

15. Flow Cycled Ventilation
Peak Flow (100%)
This is an example of a flow-cycled ventilation. During normal operation the breath is cycled when the inspiratory flow decelerates for 10% of the peak flow.
If a leak is present such that the inspiratory flow is prevented from reaching 10% cycling criteria, then the breath will continue to the set I time. The set I time is the maximum time for inspiration.
leak
10%
Time
Set (max) Tinsp.
Tinsp. (eff.)

16. Mechanical Ventilation Modalities
Pressure-targeted
Volume-targeted

17. Pressure-support ventilation (PSV) Pressure-control ventilation (PCV)
Pressure-targeted Modalities
Pressure-support ventilation (PSV)
Pressure-control ventilation (PCV)
PCV-AC
PCV-SIMV
PCV-IMV
Pressure-limit ventilation (PLV)

18. Pressure-targeted modalities are characterized by limiting the amount of pressure that can be delivered during inspiration. The clinician sets the maximum pressure and the ventilator does not exceed this level. The volume of gas delivered to the baby varies according to lung compliance and the degree of synchronization between the baby and the ventilator. If compliance is low, less volume is delivered than if compliance is high. In IMV, tidal volume fluctuates depending on whether the baby is breathing with the ventilator or against it.

19. Volume
Pressure
Note that the FCV breaths are all similar in pressure and volume delivery.

20. Figure 3                                                                 

21. Volume-targeted
Volume control ventilation
Volume control A/C
Volume control SIMV
Volume control IMV

23. Mechanical Ventilation Modes

24. Hybrid ventilation
Volume guarantee
Pressure-regulated volume control(PRVC) (PLV+VCV)
Volume assured pressure support(VAPS) (PSV+VCV)
Volume support ventilation (PSV+PRVC)
Pressure augmentation

25. Thanks
Thanks