1. Application Specific VAV Controller
What is FG+?
Application Specific VAV Controller
Global EASYIO conference Madrid 2014

2. Standard Features Easy installation Native BACnet – RS-485
No software tools needed
Built in system diagnostics
Automatic occupancy mode
Advanced reheat logic
Global EASYIO conference Madrid 2014

3. Controller Models What is FG+? BAC-8001: Cooling/Heating w/ Changeover
BAC-8005: Fan Power and/or Reheat
BAC-8205: Fan Power and/or Reheat w/ Position
BAC-8007: Dual Duct
TSP-8001: Dual Duct Slave
Global EASYIO conference Madrid 2014

4. SimplyVAV Sensors
What is FG+?
Global EASYIO conference Madrid 2014

5. Sensor Models What is FG+? STE-8001W80: Digital Wallsensor, Temp
STE-8201W80: Digital Wallsensor, Temp and Occ.
STE-6010W80: Minisensor, Temp Only
STE-6014W80: Minisensor, Temp and Setpoint Dial
STE-6017W80: Minisensor, Temp, STP, and Override
Global EASYIO conference Madrid 2014

6. Easy Installation V Bolt 1 Anti-rotation screw Standard CAT-5 cabling
Pickup tube lengths are not an issue
Global EASYIO conference Madrid 2014

7. Controller Configuration
What is FG+?
Wall sensor interface
Controller Configuration
BACnet settings
Terminal balancing
Global EASYIO conference Madrid 2014

8. System Diagnostics Points used for AHU optimization Need AHU
Need Higher Static Pressure
Need Cooler Supply
Need Warmer Supply
Global EASYIO conference Madrid 2014

9. Automatic Occupancy Mode
What is FG+?
Allows AHU to be scheduled
Primary airflow lost
Enter Unoccupied mode
Zones setback without network
Global EASYIO conference Madrid 2014

10. Advanced Reheat Logic What is FG+? Discharge Temp Management
Limit DAT within 15 degrees of RT
Addresses
Energy conservation
Improperly sized reheat
Global EASYIO conference Madrid 2014

11. BAC-8001 Changeover “Cooling only” box
Global EASYIO conference Madrid 2014

12. BAC-8005 Changeover Fan Control Series or Parallel
Start/Stop and Modulating Fan Signals
Reheat Control
Modulating
Staged(Up to 3)
Time-proportion
Floating
Global EASYIO conference Madrid 2014

13. BAC-8205 What is FG+? BAC-8005 features True Damper Position
Integrated actuator position feedback
60 second gear train versus 90
Global EASYIO conference Madrid 2014

14. BAC-8007 What is FG+? VAV Mixing or Non-Mixing, CAV TSP-8001
Secondary Duct Controller
Actuator
Pressure Transmitter
Global EASYIO conference Madrid 2014

15. Any Sensor Any Controller
What is FG+?
Controllers
BAC-8001
BAC-8005
BAC-8205
BAC-8207
TSP-8001
Sensors
STE-8001W80
STE-8201W80
STE-6010W80
STE-6014W80
STE-6017W80
CAT5 CABLE
Global EASYIO conference Madrid 2014

16. Now Available from KMC What is FG+? “VVT” Flexstat (SimplyVVT)
P/N BAC CW-ZEC
Packaged Equip Zone Controller
Reduced menu structure
Imbedded polling routine
SimplyVAV controllers
Up to 16 Zones per SVVT
Up to 3 SVVTs per network
Global EASYIO conference Madrid 2014

17. SVVT What is FG+? BACnet Network A: Device Instances 1000001-1000016
B: Device Instances
C: Device Instances
Global EASYIO conference Madrid 2014

18. NiagaraAX Module
What is FG+?
Global EASYIO conference Madrid 2014

19. Tridium JACE Architecture
What is FG+?
Global EASYIO conference Madrid 2014