1. Reveal™ Touch Screen Product Overview

2. Agenda Introduction Applications Product Specifications
What is Reveal?
How is it a different display?
Applications
Where to use it?
What can it show?
Product Specifications
General Specs
Features and Benefits
Programming Reveal
WEBs-AX Driver
Basic Components and Navigation
Point Limits
More Info
Documentation under Development
Questions

3. A Compact Display To Show System Information
What is Reveal™?
A 4.3” Touchscreen LCD display (480x272) that connects to any WEBs-AX controller
Compact system interface to:
Monitor Site & System Status
Change Setpoints
Perform Overrides
View Alarm Status
Two versions available:
24-bit high definition color
Extended temp monochrome
Product Availability: Dec 2009
A Compact Display To Show System Information

4. How is Reveal™ Different?
Typical LCD displays are:
Generic Web Browser based (IP addressable)
Protocol-specific (LonWorks, BACnet addressable) with cumbersome configuration tools
Reveal is different in two ways:
Interfaces directly with WEBs-AX Controllers through an RS-485 port – achieves network independence
Customize buttons and navigation from WEBs Supervisor (WEBStation-AX or WEBPro-AX)
Configured from WEBStation-AX or WEBPro-AX
WEBs-AX Controllers
RS-485
Configurable Display Programmed Natively From Niagara

5. Where can you use Reveal™?
Can use Reveal at any location:
At the Unit: Air Handlers, Rooftop units
At the Controller: Look at different point info in a WEBs-AX controller
For the Mechanical Room: Single display for the entire system
Remote Location: Office, Lobby, etc.
Can be used for different users:
Multiple displays can be connected to a single WEBs-AX controller (tested up to 4)
Different displays can show different information from the same controller
Use Multiple Displays Where You Need It…

6. What can Reveal™ Reveal?
Use Reveal™ to see…
Monitoring Points:
Numeric Points, Boolean Status, etc.
Up to 3 points can be continuously monitored from the home screen
Set Points & Overrides
Manual Permanent Overrides
Alarms:
View System Alarms
Schedules & Trends:
Not included in initial version
Flexible Display; Works with Most Niagara Data Types

7. Reveal Product Specs Attractive wall-plate mounted packaging
6.58” X 3.65” X 1.42”
Permission-Based Access Control
4-digit PIN prompt before allowing setpoint changes
Allows local and remote download of firmware and application software updates
Local: with a USB drive
Remote: from the controller
Multi-language capable
English supported initially

8. Reveal Product Specs Operating Environment
Color display operating ambient temp: 14 to 122°F (-10 to 50°C).
Grayscale display operating ambient temp: -4 to 158°F (-16 to 70°C)
Operating relative humidity: 5 to 95% RH, non-condensing
Electrical Ratings and Tolerances
Input voltage range: 20 – 30VAC, 50/60Hz, 8VA
Standards & Approvals
Meets RF Emissions per FCC Part 15, Subpart B, Class A.
Meets UL/CUL 916.
Meet EN EMC requirements for CE Certification.
Meets AS/NZS CISPR 11– Mark for Australian, New Zealand C-Tick
Meets RF Emissions per Industry Canada Class A Limits.

9. Reveal™ Part Numbers & Pricing
Make Market
WEBs Standard Multiplier
LCD-CT043A100 $1099 US Trade Base
High Definition Color Display (480 x 272, 24-bit Full Color)
For use in Site Manager’s office and/or located throughout a site
LCD-GT043A100 $1049 US Trade Base
Extended Temperature Grayscale Display
-4°F to 158°F (-16°C to 70°C)
For use inside HVAC rooftop units, walk-in cold rooms, etc.

10. Features And Benefits Fast, easy configuration
Completely customizable navigation thru WEBs-AX Supervisor
Local and Remote upgrade options
A tailored Niagara-friendly display device
No additional programming tools needed
Lower install costs
An alternative to generic browser-based HMIs
Better hassle-free device management
Added revenue potential on WEBs projects
Reduced training and support costs

11. Programming: Niagara Driver
Program via the WEBs-AX Supervisor:
Need a module (jar) file
Build navigation and links to points
Save and re-use
An Emulator included:
Runs the same application as on the device
Enables faster prototyping (no need to download configuration every time)

12. Programming: Basic Components
Title Bar to show current location within navigation
Customizable images – a standard icon set provided
Add/ Remove Navigation Buttons to fit your needs
Data Bar displays up to 3 points continuously

13. Programming: Navigation Hierarchies

14. Programming: Point Limits
Supports up to 5000 screen objects and/or data fields which can be used in combinations to create and display site navigation and system status
Complete details on how to calculate screen object consumption can be found in the Programming Guide
An illustrative example:

15. More Info Installation Instructions (62-0321)
Provides mounting dimensions for hardware installation as well as provides initial power-up and device configuration process
Provides customer with basic operational instructions, how to access information, who to contact for service, etc
Software Programming Guide ( )
Shows how to install the Driver on a PC and a WEBs-AX controller
Shows Application Developers how to create screen layout wire sheets, etc
Sell Sheet ( )
Product Data ( )
Guide Spec (Find on specifyhoneywell.com/No Form Number)

16. Questions?