KX-NS1000 Terminals Rev1.4 19 Jan., 2016.

KX-NS1000 Terminals Rev Jan., 2016

Table of Contents 1. Overview 2. NT55x Series 3. Add-on 48 Key Module
4. NT505 Registration 5. NT54X and NT560 6. DT5XX 7. UT Series 8. NT3xx Series 9. NT and UT common feature 10. Other Terminals 11. Registration Appendix 2

Chapter 1 Overview Chapter 1: Product Overview .

1. Overview KX-NS1000 supports the following types of terminal.
Proprietary Telephones SIP Phone – UT series IP Proprietary Telephone (IP-PT) – NT3XX, NT5XX Digital Proprietary Telephone (D-PT) – DT5XX Portable Station (PS) – TCA series and WT IP Softphone IP Conferencing Phone – NT700 General Telephones SIP Phone Single Line Telephone (SLT) .　

Chapter 2 NT55X Chapter 1: Product Overview . 5

2. NT55x Series Product Overview KX-NT511 KX-NT551
- 1line 16 characters LCD - 3-FF key - 2 port Ethernet ports(10/100M), No PoE KX-NT551 - 1-line 16 characters LCD - 8-FF key - 2 x Gigabit Ethernet ports, PoE(Class2) Need Software version V3.0 or later for NT551/553/556 and V3.01 for NT511 Three DN keys are assigned as default and if you delete these DN keys, you can not make or receive a call.

2. NT55x Series Product Overview-2 - 3-line Graphical LCD KX-NT553
- 24-FF key (Self-Labeling 12x2　w/Back Lit) - 2 x Gigabit Ethernetports, PoE(Class3) - EHS(Electronics Hook Switch) - Connectable Add-on 48 Key Module KX-NT556 - 6-line Graphical LCD - 36-FF key (Self-Labeling 12x3 w/Back Lit) - 2 x Gigabit Ethernetports, PoE(Class3) - EHS(Electronics Hook Switch) - Connectable Add-on 48 Key Module Need Software version V3.0 or later for NT551/553/556 and V3.01 for NT511 Three DN keys are assigned as default and if you delete these DN keys, you can not make or receive a call.

2- Gigabit Ethernet port Wideband compliant/HAC compatibility
2. NT55x Series Hardware Specification (*1) HAC : Hearing aid compatibility (*2) EHS : Electronics Hook Switch Following table shows NT511/551/553 and NT556 Hardware Spec. overview KX-NT511 KX-NT551 KX-NT553 KX-NT556 LCD Type Character Graphic Dots(WxH) 5x8 8x16 242x 55 242x109 Line 1 3 6 16/Line 24/Line Backlit No Yes Ethernet Port 2- Fast Ether 2- Gigabit Ethernet port Handset HAC(*1) compatibility Wideband compliant/HAC compatibility Handset Port Yes (2.5mm audio jack) EHS(*2) Yes* (3.5mm audio jack) SP-Phone Full Duplex

Desk Top/Wall Mont(Kit does not Included)
2. NT55x Series Hardware Specification Following table shows NT511/551/553 and NT556 Hardware Spec. overview KX-NT511 KX-NT551 KX-NT553 KX-NT556 Bluetooth No PoE Yes(Class2) Yes(Class3) ECO Mode Yes AC Adaptor Yes Included Yes (Option) Installation Desk Top/Wall Mont (Kit Included) Desk Top/Wall Mont(Kit does not Included)

2. NT55x Series Signaling Specification KX-NT511 KX-NT551 KX-NT553
IPv4 Yes IPv6 No DHCP Client Signaling MGCP Audio Codec G.722/G.711/G.729a Media Relay GW VLAN QoS(DiffServ) (*1) Secondary PBX (*1): Only support this feature for packets (PTAP/MGCP/RTP) .　

2. NT55x Series Optional module
KX-NT511 KX-NT551 KX-NT553 KX-NT556 AC Adaptor No (Included) KX-A239 Wall mount kit KX-A432 KX-A433 Recommended Headset Wired Headset N/A KX-TCA400/KX-TCA430 EHS Headset Plantronics*/Jabara (*) Savi Office convertible, Voyager 510S and CS70N

2. NT55x Series Features Panasonic KX-NT553 and 556
Support Plantronics Electric Hook Switch (EHS) - NT553 and NT556 NT553 and 556 have embedded PSB (Plantronics Serial Bus) No need special adaptor cable or remote handset lifter. Remote phone control from headset ; answer / end call, ring tone in headset. Plantronics EHS Model Wireless Savi Office series DECT Savi W740 CS70N Voyager 510S Bluetooth EHS tool for phone control Panasonic KX-NT553 and 556 Only 3.5mm plugs cable Only 3.5mm plugs cable Jabara EHS Model Wireless Pro 9450 DECT GN 2120

Chapter3 Add-on 48 Key Module 13

3. Add-on 48 Key Module(DSS Console)
KX-NT505 SPEC Overview - 48 FF key with Dual LED (Green/Red) - NT553 and NT556 can connect NT505, other Phone can not connect NT505 - No need Local AC Power for connecting 1st NT505 - Up to 4 key modules can be connected. - Need Local AC Power at 2nd NT505 for 2 or more NT505 connection - Connection between Phone and NT505 or Nt505 and NT505, is used 12 pin Flat cable P2P can not be disabled, but NS1000 has P2P Group function, so if the phones which assigned different P2P Group, they can make non P2P call.

Chapter4 NT505 Registration 15

4.NT505 Registration FF-Key Setting for NT505
1.Set up number of NT505 for each extension Click [Setup]  select [PBX Configuration] – [4.Extension] – [4. Flexible button] Step1.Set up Number of NT505 which is connected to the Extension(NT553 or NT556) Note: Max. 64 NT505 units can be installed to NS1000, so if you have already installed 64 NT505 units to NS1000, you can not install NT505 units any more

4.NT505 Registration FF-Key Setting for NT505
2. Set up FF-Key for each NT505 Click [Setup]  select [PBX Configuration] – [4.Extension] – [4. Flexible button] Step2.Select NT505 position Step3. Enter function for each FF-Key

Chapter 5 NT54X and NT560 18

5.NT54X and NT560 Standard Model -Features- KX-NT546 - 6-line LCD
- 24-Flexible CO key - SP-Phone - ECO Mode KX-NT543 - 3-line LCD - 24-Flexible CO key - SP-Phone - ECO Mode * The software version of NS1000 should be version 2.01 or later. [During power saving mode] 1. PC port : Power off 2. LAN port : Enable only 10Base-T Low power consumption, combined with an advanced 'power saving mode' means lower energy costs.

5.NT54X and NT560 Desi-less Model KX-NT560 - 4.4 inch monochrome LCD
- Paper label free (Self labeling : 32=8 x 4pages) - Full-duplex SP-phone - 2 * 1GbE ports, PoE Class3 - Built-in Bluetooth for Headset - ECO mode * The software version of NS1000 should be version 2.01 or later. [During power saving mode] 1. PC port : Power off 2. LAN port : Enable only 10Base-T Low power consumption, combined with an advanced 'power saving mode' means lower energy costs.

5.NT54X and NT560 Hardware Specification (1/2) Item KX-NT546 KX-NT543
LCD 242 x 109 pixels, 6-line Monochrome 242 x 55 pixels, 3-line 242 x 218 pixels, 6-line + 4-line for FF Key LCD Backlit Yes Tilt adjustment LCD No Ethernet Port 10/100M Two port 10/100/1000M Headset port Speaker Phone Yes (Full Duplex) Microphone Electric Hook Switch (EHS) Plantronics Option Unit connection (Add-on 12 or 60 CO key Module) XML Application

5.NT54X and NT560 Hardware Specification (2/2) Optional Module
Item KX-NT546 KX-NT543 KX-NT560 Audio Codec G.722/G.711/G.729A Bluetooth Module No Built-in (HSP) PoE Yes (Class2) (Class3) AC Adaptor (not included) Installation Desktop Wall mount (Option) Optional Module Item KX-NT546 KX-NT543 KX-NT560 AC Adaptor* KX-A239 Wall Mount Kit KX-A433 Headset RP-TCA400/430 * No for Argentina

5.NT54X and NT560 NT560 Features Built-in Bluetooth
- Built-in Bluetooth module that can be used to wirelessly connect a Bluetooth headset. Support Bluetooth headset : Plantronics Savor M1100 GN Netcom JABRA WAVE Built-in Bluetooth * Latest Verified Headset Information : PSN CS Website for Panasonic sales company Self Labeling - 32=8 x 4pages FF Key(4) FF Key(8) FF Key(3) FF Key(7) FF Key(2) FF Key(6) FF Key(1) FF Key(5) Next Prev FF Key(12) FF Key(16) FF Key(11) FF Key(15) FF Key(10) FF Key(14) FF Key(9) FF Key(13) Next Prev 1st screen 2nd screen FF Key(20) FF Key(24) FF Key(19) FF Key(23) FF Key(18) FF Key(22) FF Key(17) FF Key(21) FF Key(28) FF Key(32) FF Key(27) FF Key(31) FF Key(26) FF Key(30) FF Key(25) FF Key(29) Next Prev Next Prev (1st screen) 3rd screen 4th screen

Chapter6 DT5XX

6.DT5XX Product Overview KX-DT521 1-line Characters LCD - 8-FF key
- Full Duplex SP Phone KX-DT543 - 3-line Graphical LCD - 24-FF key - EHS(Electronics Hook Switch) - Full Duplex SP Phone Three DN keys are assigned as default and if you delete these DN keys, you can not make or receive a call.

6.DT5XX Product Overview-2 KX-DT546&DT590 DT546 - 6-line Graphical LCD
- 24-FF key - EHS(Electronics Hook Switch) - Full Duplex SP Phone DT FF-Key Three DN keys are assigned as default and if you delete these DN keys, you can not make or receive a call.

Desk Top/Wall Mount (Wall Mount Kit doesn’t Include)
6.DT5XX Hardware Specification Following table shows DT-521/543 and DT-546 Hardware Spec. overview KX-DT521 KX-DT543 KX-DT546 LCD Line 1 3 6 Character 16/Line 24/Line Backlit Yes Handset Full Duplex Handset Port Yes (2.5mm audio jack) EHS(*1) No Yes* (3.5mm audio jack) SP-Phone Bluetooth External Expansion 1 DXDP port 1XDP/DXDP port USB Module I/F Installation Desk Top/Wall Mount (Wall Mount Kit doesn’t Include) (*1) EHS : Electronics Hook Switch

48 Dual colored LED(Red/Green)
6.DT5XX Hardware Specification-(2) Following table shows DT-590Spec. overview KX-DT590 LCD No Key 48 Dual colored LED(Red/Green) Installation Desk Top/Wall Mont (Kit does Included)

KX-TCA400/TCA430, RP-TCA400/TCA430
6.DT5XX Optional module KX-DT521 KX-DT543 KX-DT546 Wall mount kit KX-A432X KX-A433X Recommended Headset Wired Headset KX-TCA400/TCA430, RP-TCA400/TCA430 EHS Headset NO Please refer

Chapter7 HDV/TGP Series Chapter 1: Product Overview . 30

7.Panasonic SIP SLT Overview
Panasonic SIP SLT is called as P-SIP (Panasonic SIP) as followings, KX-TGP600 KX-HDV100/130/230/330/430 Communication IP Camera /IP Video Doorphone KX-NTV150/NTV160 Item Pana-SIP Communication IP Camera/IP Video Doorphone UT series 3rd party SIP phone Activation Key NSM5xx/NSM2xx NSM7xx V-Card Type V-SIPEXT V-UTEXT Feature SIP-SLT (Same as 3rd party SIP phone) SIP-MLT

7.Panasonic SIP SLT KX-TGP600 Product Outline Key Concept
General Specification　 8 Simultaneous Call x 8 Handsets Up to 8 IP account, up to 8 Handsets, up to 8 simultaneous calls (Narrowband only) Variety of Handset TPA60, TPA65, UDT121, UDT131 Wireless Desk Phone Unique model which requires no wiring Location free for installation Standard Type (TPA60) Repeater (A406) Specification of TGP600　 Base Unit (TGP600) Wireless Desk Phone (TPA65) (UDT121) (UDT131) CAT-iq 2.0 Voice Quality HD voice, Noise Reduction Repeater Max 6 (max 3 cascade connection)

7.Panasonic SIP SLT KX-TGP600
There are following 2 types of registration to NS series. One to One Mode Max 8 terminals with different extension numbers. Use 8 SIP Extension Ports One to N Mode Max 8 terminals with same extension number. Use only 1 SIP Extension Port ・・・・ SIP Extension 101 102 103 108 < One to One Mode > (HS1) Same extension number can be used by max 8 terminals < One to N Mode > (HS2) (HS3) (HS8) Max. 8 different extension numbers

Simultaneous voice calls
7.Panasonic SIP SLT KX-TGP600 Repeater (A406) Base Unit (TGP600) Narrowband : up to 8ch Wideband : up to 4ch CODEC：G.711/G.729a CODEC：G.722 Simultaneous voice calls Narrowband : up to 4ch Wideband : up to 2ch voice calls

General Specification
7.Panasonic SIP SLT KX-HDV100/130 Product Outline　 General Specification　 HDV100/130 Item HDV100 HDV130 LCD 3 Line with back-lit LAN Port 1 2 SIP account PoE No Yes SP Phone No Microphone ( Monitor only) HD Voice

7.Panasonic SIP SLT KX-HDV230 Benefits
Large Self-Labeling LCD with Backlight The large, 5.0-inch LCD shows a large number of text characters, for excellent visibility and easy operation. Advanced Features • 2.3-inch Graphical LCD with Backlight • 5.0-inch Graphical Self-Labeling LCD with Backlight • 6 SIP Accounts • 2 Gigabit Ethernet Port & PoE • Full Duplex Speaker Phone • 3 Soft Keys and 24 (12×2) FF Keys with LED • Navigation Key • Headset Jack (RJ9) Supported • EHS (3.5 mm) Supported • Expansion Module Supported 24(12×2) FF Keys with LED Comes standard-equipped with 24 FF keys. Ideal for persons who frequently use telecommunications.

7.Panasonic SIP SLT KX-HDV330 Benefits Colour LCD with Touch Panel
The LCD is easy to read, and the touch panel is easier to operate than buttons. Recommended for supervisor use. Advanced Features Easy Operation • 4.3-inch Touch Panel LCD with Backlight • 12 SIP Accounts • 2 Gigabit Ethernet Port and PoE • Full Duplex Speaker Phone • 24 (8×3) FF Keys • Headset Jack (RJ9) Supported • EHS (3.5mm) Supported • Built-in Bluetooth® • Expansion Module Supported Intuitive, easy-to-understand design and operation.FF Keys are also easy to operate with the Touch Panel. Built-in EHS and Bluetooth Using a compatible headset, communication is possible while working or when away from the desk .

7.Panasonic SIP SLT KX-HDV430 Benefits Video Communication
Recommended for persons who often have videoconferences at their desk. Monitoring is also possible connected to IP cameras. Ideal for supervisors or receptionists. Advanced Features • 4.3-inch Touch Panel LCD with Backlight • Video Communication Supported (H.264) • 16 SIP Accounts • 2 Gigabit Ethernet Port and PoE • Full Duplex Speaker Phone • 24 (8×3) FF Keys • Headset Jack (RJ9) Supported • EHS (3.5 mm) Supported • Built-in Bluetooth® • Expansion Module Supported Easy Operation Intuitive, easy-to-understand design and operation. FF Keys are also easy to operate with the Touch Panel. Built-in EHS and Bluetooth Using a compatible headset, communication is possible while working or when away from the desk .

Communication IP Camera/IP Doorphone
Clear Voice Enables comfortable voice with video communication PBX Integration as extension One Touch Call, Auto Dialing by sensor function, Remote connection Easy Installation Easy & Flexible Installation ( Standard hole ) Support Wi-Fi Connection ( NTV150 ) System　 Specification　 General Specification　 External Sensor LAN/PoE WiFi AC Adaptor Protocol SIP Interface NTV150: PoE/LAN (WiFi) , AC Adapter(option) NTV160: PoE only, IP43 Camera Resolution:1600 x 1200(2MP),Angle :92°x 70° Video ePTZ IN/OUT port 1 Each NTV150 Built-in Speaker& Mic Deployed and works as PBX SIP Extension Call Button

Communication IP Camera/IP Doorphone
Viewer APP PBX Connection : Panasonic PBX such as NS/NSX series only. Activation Key : Same as NT phone series PBX NTV160 PBX NTV150 SIP Video Terminal Audio/Video Door Opener Video & Audio Terminals Audio Terminal Network camera interface is available. > Viewer, Recording is available by application. Camera control is available by SIP > PTZ is available by DTMF control. Motion and Voice detection is available. Video & Audio communication is established by SIP protocol Output port is available to control door lock. (NT55x, NT54x and SIP terminals can control) Sensor detection can generate a call to certain extension. DTMF Door Open Auto transmission Door Opener Sensor function PC / Smart Phone Viewer APP Video SIP Phone Viewer app link->

Chapter8 UT Series

8.UT Series Executive Model / Smart Desk Phone KX-UT248
- 4.4 inch monochrome LCD - Paper label free (Self labeling : 24=8 x 3pages) - Full-duplex Speaker phone - 2 * 1GbE ports, PoE Class3 - Built-in Bluetooth for Headset - XML Application KX-UT670 - 7 inch touch screen (WVGA 800 x 480 pixels) - 24-FF key - Full-Duplex Speaker phone - High quality video (H.264/720P) - SDHC / SDXC 2 * 1GbE ports, PoE Class3 Built in Application Note) Three DN keys are assigned as default. If you delete these DN keys, you can not make or receive a call. GbE : Gigabit Ethernet

8.UT Series Standard Model KX-UT136
- 6-line Graphical LCD with Backlit - 24-FF key KX-UT133 - 3-line Graphical LCD with Backlit - 24-FF key Note) Three DN keys are assigned as default and if you delete these DN keys, you can not make or receive a call. Three DN keys are assigned as default and if you delete these DN keys, you can not make or receive a call.

8.UT Series Basic Model KX-UT113 /123 - 3-line Graphical LCD
UT113 : No Backlit UT123 : Backlit .　

2. Specification and Features
Hardware Specification KX-UT670 KX-UT248 LCD 7 inch touch screen, WVGA (800 x 480 pixels) 262,000 colours 4.4 Inch 242 x 218 pixels LCD screen, 6-line + 4-line for FF Key Monochrome LCD Backlit Yes Ethernet Port 10Base-T/100Base-TX/1000Base-T Two port Handset Wideband Headset port (2.5mm audio jack)

(IEEE 802.3af Class 3 standard compliant) (Wall mount kit is optional)
2. Specification and Features Hardware Specification KX-UT670 KX-UT248 EHS* Yes (3.5mm audio jack) Speaker Phone Microphone Built-in Bluetooth No USB interface (USB keyboard) PoE (IEEE 802.3af Class 3 standard compliant) AC Adaptor (optional) Installation Desktop Wall mount (Wall mount kit is optional) (*) EHS : Electronic Hook Switch USB memory sticks are not supported. USB I/F support “dongle for a Bluetooth headset” from next version (under study).

KX-UT670 KX-UT248 IPv4 Yes IPv6 No DHCP Client Signaling SIP Audio Codec G.722 G.711 G.729a Echo Cancellation .　

Optional module KX-UT670 KX-UT248 AC Adaptor KX-A422 KX-A239 Wall mount kit KX-A434 KX-A433 Recommended Headset Wired Headset KX-TCA400 KX-TCA430 EHS Headset Plantronics* (*) Savi Office convertible and W740, Voyager 510S, CS70N and CS510

8.UT Series Hardware Specification KX-UT133/136 KX-UT113/123 LCD
242 x 55 dots, 3-line Monochrome UT136: 242 x 109 dots, 6-line LCD Backlit Yes UT113 : No UT123 : Yes Ethernet Port 10/100M Two port UT113 : One port UT123 : Two port Handset Wideband compliant HAC* Headset port (2.5mm audio jack) (*) HAC : Hearing aid compatibility

(Wall mount kit is not included) Desktop (1-tilt) Wall mount
8.UT Series Hardware Specification KX-UT133/136 KX-UT113/123 EHS* Yes (3.5mm audio jack) No Speaker Phone Microphone Built-in Bluetooth USB interface PoE AC Adaptor (not included) Installation Desktop Wall mount (Wall mount kit is not included) Desktop (1-tilt) Wall mount (*) EHS : Electronic Hook Switch USB memory sticks are not supported.

8.UT Series Specification KX-UT133/136 KX-UT113/123 IPv4 Yes IPv6 No
DHCP Client Signaling SIP Audio Codec G.722 G.711 G.729a Echo Cancellation .　

8.UT Series Optional module
KX-UT133/136 KX-UT113/123 AC Adaptor KX-A239 Wall mount kit KX-A433 KX-A432 Recommended Headset Wired Headset KX-TCA400 KX-TCA430 EHS Headset Plantronics* N/A (*) Savi Office convertible and W740, Voyager 510S, CS70N and CS510

Chapter9 NT3xx Series Chapter 1: Product Overview . 53

9.NT3xx Series Desi-less Model KX-NT366
- 6-line Tilt LCD with White Backlit - Desi-less (No paper-label) (Self labeling : 48=12 x 4pages) - SP-Phone .　

9.NT3xx Series Standard Model KX-NT346
- 6-line Tilt LCD with White Backlit - 24-Flexible CO key - SP-Phone KX-NT343 - 3-line Tilt LCD with White Backlit - 24-Flexible CO key - SP-Phone .　

9.NT3xx Series Basic Model KX-NT321 - 1-line LCD - 8-Flexible CO key
- SP-Phone .　

9.NT3xx Series Optional Module KX-NT305 - Add-on 60 Key Module
- For NT346/343 KX-NT303 - Add-on 12 Key Module - For NT346/343 KX-NT307 - Bluetooth Module - For NT366/346/343 .　

9.NT3xx Series Hardware Specification KX-NT366 KX-NT343/346 KX-NT321
LCD 145 x 60 dots, 6-line 96 x 60 dots (Self-labeling) Monochrome NT343: 120 x 24 dots, 3-line NT346: 16characters, 1-line LCD Backlit Yes (White) No Tilt adjustment LCD Yes Ethernet Port 10/100M Two port Headset port Speaker Phone Microphone

(with Bluetooth Module)
9.NT3xx Series Hardware Specification KX-NT366 KX-NT343/346 KX-NT321 Audio Codec G722 G711 G729a Bluetooth Headset Yes (with Bluetooth Module) No PoE AC Adaptor (not included) Installation Desktop Wall mount Optional Module KX-NT366 KX-NT343/346 KX-NT321 AC Adaptor KX-A239 .　

NT and UT common feature
Chapter10 NT and UT common feature 60

10.NT and UT common feature
Peer to Peer (P2P) Communications The NS1000 automatically establishes peer-to-peer communication between peer-to-peer compatible IP extensions (i.e., NT3xx and UT series) that belong to the same P2P group. Non-P2P Path P2P Path P2P Path NT3xx NT3xx P2P Path By using Peer to Peer mode, we can: - Potentially reduce network wide traffic to the PBX - Improve voice quality for P2P calls (By using G722 codec Only supported for P2P calls) UT UT *Please refer to the P2P.ppt for details. P2P can not be disabled, but NS1000 has P2P Group function, so if the phones which assigned different P2P Group, they can make non P2P call.

Chapter11 Other Terminals 62

11.Other Terminals Other Terminals Terminal Model Note (Note)
Portable Station KX-TCA series KX-WT Please refer to “System Wireless.ppt” for details IP-PT KX-NT265 Software version of NT265 is 2.00 or later IP Softphone AK (KX-NSM2xx) is required IP Conferencing Phone KX-NT700 When it connects to NS1000 as a SIP Extension, AK (KX-NSM7xx) is required Doorphone KX-T30865 KX-T7765 It is necessary to install the DPH1 Card (KX-NS0161) (Note) NS1000 does not support KX-HGT100 and KX-NT400. HGT100 Making a call is possible and voice path is no problem. Receiving a call is possible, but there is no voice. Some features such as transfer do not work. NT400 It can not be registered. 63

Chapter12 Registration 64

12.Registration Overview
NS1000 has 3 types for registration mode for IP terminals. 1. Full Automatic Mode As an IP terminal plugs in to the network, the IP terminal will automatically discover the main unit and an unallocated extension number will automatically assigned by the main unit. 2. Extension Input Mode and the user will be guided to input an extension number. 3. Manual Mode It is same operation as well as TDE/NCP. 1. Full Automatic Mode 2. Extension Input Mode 3. Manual Mode UT series Yes No NT3/5xx, NT265 NT700 General SIP Phone Yes* (*) Only input the Password

12.Registration Overview Registration Procedure No Use DHCP Server?
Yes External NS1000 or External? NS1000 See “Set DHCP to Enable” (P62) See the manual of DHCP server See “Assign IP Address to Terminals” (P63-64) Which registration Mode? Full Automatic Mode => See P67-72 Extension Input Mode => See P73-78 Manual Mode => See P79-92

12.Registration Set DHCP to Enable – PBX setting
1. Click [Setup]  select [Network Service] – [2.Server Feature] – [1.DHCP]  Set “DHCP server” to “Enable” and assign both “Starting IP address” and ”Ending IP address”, then click “Apply”

12.Registration Assign Own IP address to Terminals – UT setting
1. Register and confirm the IP address of the UT. 1-1 : [Setup] select [Network settings]  [Enter]  select [Network]  [Enter]  select [STATIC]  [Enter]  Enter [IP address]  [Enter]  Enter [ Subnet mask]  [Enter] 1-2 : [Back]  select [Information Display]  [Enter]  [Down] (Navigation key) 1-3 : Confirm the IP address displayed on LCD. Information Display Network Settings ENTER Setup Now starting… Back Enter Network VLAN DHCP STATIC IP Address Subnet mask

12.Registration Assign Own IP address to Terminals – NT setting
Register the IP address and Subnet mask of the NT3xx. Supply power to the NT3xx  Press [SETUP] when it is displayed.  select [Network]  [Enter]  Select [Disable] for DHCP setting  select [IP Address]  [Enter]  Enter [IP address]  [Enter]  select [Subnet Mask]  [Enter]  Enter [Subnet Mask Address]  [Enter]  [EXIT]  [STORE] Menu -> Network Setup Searching… STORE ENTER DHCP Enable Disable -> IP Address EXIT CONT NEXT IP Address ? CLEAR -> Subnet Mask Subnet Mask ? PREV

12.Registration IP Terminal Registration – PBX setting
Set Registration Mode Click [Setup]  select [PBX Configuration] – [1.Configration] – [1.Slot] [IP Phone Registration] – [Option] or [Site Property] – [Main]

12.Registration IP Terminal Registration – PBX setting
Set Registration Mode Select “IP Terminal Registration Mode” which you want to set, then click [Apply].

12.Registration Registration of UT series – PBX setting
Full Automatic Mode 1. Click [Setup]  select [PBX Configuration] – [1.Configuration] – [1.Slot]  select [Virtual]

Full Automatic Mode 2. Select [V-UTEXT32]

Full Automatic Mode After this, UT terminals are automatically registered to PBX. 3. Select [Number of cards], then click [OK]

12.Registration Registration of NT series – PBX setting
Full Automatic Mode 1. Click [Setup]  select [PBX Configuration] – [1.Configuration] – [1.Slot]  then select [Virtual]

Full Automatic Mode 2. Select [V-IPEXT32]

12.Registration Registration of NT3xx series – PBX setting
Full Automatic Mode After that, NT terminals are automatically registered to PBX. 3. Select [Number of cards], then click [OK]

Extension Input Mode UT series do not support “Extension Input Mode”, so even if you set registration mode to “Extension Input Mode”, the way of registration is same as “Full Automatic Mode”. Please refer “Full Automatic” explanation.

Extension Input Mode 1. Click [Setup]  select [PBX Configuration] – [1.Configuration] – [1.Slot]  then select [Virtual]

12.Registration Registration of NT – PBX setting Extension Input Mode
2. Select [V-IPEXT32]

Extension Input Mode 3. Select [Number of cards], then click [OK] After set up above procedure, NT3xx terminals ,which is connected to NS1000 , will be automatically registered to PBX but no assigned extension number.

12.Registration Registration of NT – PBX setting Extension Input Mode
4. Select [Port property]

Extension Input Mode 5. Assign [Extension Number], then click [Apply].

12.Registration Registration of UT series – PBX setting Manual Mode
1. Click [Setup]  select [PBX Configuration] – [1.Configuration] – [1.Slot]  select [Virtual]

2. Select [V-UTEXT32]

3. Select [Number of cards], then click [OK]

5. Click [Registration] * Password is assigned “1234” as default.

6. Select [Extension number], then click [Next]

7. After Registration completed, then click [Close]

12.Registration Registration of NT series – PBX setting Manual Mode
1. Click [Setup]  select [PBX Configuration] – [1.Configuration] – [1.Slot]  select [Virtual]

2. Select [V-IPEXT32]

3. Select [Number of cards], then click [OK]

5. Click [Registration]

6. Select [Extension number], then click [Next]

7. After Registration completed, then click [Close]

Thank you ! The END

Appendix Chapter 1: Product Overview . 99

Appendix Power Consumption Table of UT terminal
UT series support both AC Adaptor and PoE. Condition Normal Mode ECO Mode AC Adaptor PoE*1 Idle (No Backlit) 1.6W 1.9W 1W 1.4W During talking (Max*2) 6W 5.3W During talking (Ave) 2W 3.5W 1.5W 3W *1 : Support PoE Class2 *2 : SP Phone

Appendix Bluetooth Headset Compatible model List with NT3xx – (1)
The following tables indicate the test result of the connectivity of Bluetooth headsets with NT3xx and Bluetooth Module NT307 Ver The test result does not guarantee the actual performance. PSN does not accept responsibility for any problem resulting from using these headsets. Manufacture Plantronics Model Voyager 855 Discovery D925 Savi Discovery975 BT Version V2.0 + EDR V2.0 Successfully pair OK Receive Incoming Call Answer Incoming Call Last Number Re-dial Volume Mute NG Speech Quality Tx : OK Rx : OK Comments Control button is Hard. Hold is OK, but no Music

Manufacture Plantronics Jabra Model Voyager Pro BT320s JX10 BT530 BT Version V2.1 + EDR V1.2 V2.0 Successfully pair OK Receive Incoming Call Answer Incoming Call Last Number Re-dial Not tested Volume Mute NG Speech Quality Comments Mute cannot be released

Manufacture Motorola Sony Ericson Model H800 H500 RAZRH3 HBH-PV610 BT Version V2.0 V1.2 Successfully pair OK Receive Incoming Call Answer Incoming Call Last Number Re-dial Not tested Volume Mute Speech Quality Comments Defect of BT-HT. There is an item of not being possible to test.

Manufacture Nokia Earglove Trepalm Model BH900 Bluevoice 3206WW BT Version V2.0 V1.1 V1.2 Successfully pair OK Receive Incoming Call Answer Incoming Call Last Number Re-dial Not tested Volume Mute Speech Quality Comments

Appendix Compatible Flexible Button List – (1) Button NT3/5xx, NT265
Loop-CO (L-CO) Yes No Group-CO (G-CO) Single-CO (S-CO) Direct Station Selection (DSS) One-touch Dialling (Fixed Key) Incoming Call Distribution Group(ICD Group) Message Message for Another Extension Call Forwarding (FWD)/Do Not Disturb (DND) – Both calls FWD/DND – Outside calls - FWD/DND – Intercom calls Group FWD – Both calls Group FWD – Outside calls Group FWD – Intercom calls

Account Yes No Conference (Fixed Key) Terminate (Flash Key) External Feature Access (EFA) Call Charge Reference Call Park Call Park (Automatic Park Zone) Yes* Call Log (Navi Key) Call Log for ICD Group Log-in/Log-out Log-in/Log-out of a specified group Log-in/Log-out for all groups Hurry-up Wrap-up *Pressing this button selects an idle parking zone from among the Call Park (preset parking zone) buttons configured on the phone.

System Alarm Yes No Time Service (Day/Night/Lunch/ break) Answer Release Toll Restriction/Call Barring ISDN Service Calling Line Identification Restriction (CLIR) Connected Line Identification Restriction (COLR) ISDN-Hold Headset (Automatic) Time Service Switching Mode (Automatic/Manual) Two-way Record

Two-way Transfer Yes No One-touch Two-way Transfer Live Call Screening (LCS) Voice Mail Transfer Network Direct Station Selection(NDSS) CTI Check-in Check-out Cleaned-up Primary Directory Number (PDN) Secondary Directory Number (SDN) DN

Appendix Compatible feature List (Operation) – (1) Features IP-PT
SIP Extension PS SLT Calling another extension Yes Calling an outside party Making a call to a Private Network (Tie Line Access) Using a Account Code (Account Code Entry) With a One-touch Button (One-touch Dialling) Yes (UT133/136 only) No Personal Speed Dialling System Speed Dialling Hot Line Quick Dialling Last Number Redial Automatic Callback Busy Call Waiting Message Waiting

SIP Extension PS SLT Executive Busy Override for an intercom call Yes No Executive Busy Override for an outside call Call Monitor DND Override ISDN Service Access Alternate Calling – Ring/Voice Remote COS Access– Walking COS Remote COS Access – Verification Code Entry Answering Calls Hands-free Answerback Yes (UT only) Call Pickup Call Pickup Deny

Appendix Compatible feature List (Operation) – (3)
Features IP-PT SIP Extension PS SLT Trunk Answer From Any Station (TAFAS) Yes No Malicious Call Identification (MCID) Transferring to an Extension Yes*1 Transferring to an Outside Party Using the PBX Service Transferring to a Call Using the ISDN Service Call Hold Call Park Yes (UT13x only) Call Splitting Yes (UT only) Answering Call Waiting Multiple Party Conversation Yes*2 *1 This feature operation may vary depending on the type of telephone. *2 SIP Extensions (except UT series) cannot originate a conference call, but can be added as a member. Call Park (Automatic Park Zone) For UT133/136, pressing this button selects an idle parking zone from among the Call Park (preset parking zone) buttons configured on the phone.

Features IP-PT SIP Extension PS SLT Leaving a conference (Unattended Conference) Yes No Leaving a conference (Leaving Three-party Conference) Yes (UT only) Letting a Third Party Join Your Call (Privacy Release) Adding a Third Party during a Conversation Using the ISDN Service (3PTY – by ISDN) Mute Off-hook Monitor Headset Operation PDN/SDN Call Forwarding – set/cancel Yes (except Follow Me) Leaving Three-party Conference：UTでも可、User Manual記載誤り（次回改版時に変更）

(except to confirm the condition)
Appendix Compatible feature List (Operation) – (5) Features IP-PT SIP Extension PS SLT FWD/DND Setting Using Fixed FWD/DND Button Yes No Call Forwarding – by ISDN (except to confirm the condition) Absent Message Extension Dial Lock Paging Answering/Denying a Paging Announcement Yes (UT only) Conference Group Call – Conference Mode Yes* Conference Group Call – Broadcast Mode * The caller can only originate a conference call and cannot control the called parties’ call status manually. Answer pagingの際にUTが誤作動起こす場合あり。 -> UTはPagingされた際にSP-Phone有効になっており、　そのSPからDTMFを検知、加えてUTはAnyキーアンサーの為。　他端末との距離を2m?以上離す必要あり。

SIP Extension PS SLT Logging in to your Mailbox Yes Subscriber Tutorial Changing or Deleting Your Personal Greeting Messages Personal Greeting for Caller ID Changing Your Password Changing or Deleting Your Subscriber (Owner) Name Playing Messages Printing Fax Messages Bookmarks (Voice Messages only) Recovering Deleted Messages Replying to Messages Transferring Messages Message Delivery

SIP Extension PS SLT Personal Group Distribution Lists Yes External Message Delivery External Message Delivery Lists Receiving External Delivery Messages Call Transfer Incomplete Call Handling Assigning Your Covering Extension Remote Call Forwarding Assigning and Cancelling Telephone Numbers for Call Transfer to Outside Line Voice Mail Transfer * Interview Mailbox * Voice Mail Transfer button is supported by IP-PT and PS.

SIP Extension PS SLT Message Waiting Notification Yes Yes*1 Personal Caller Name Announcement Live Call Screening (LCS) Yes*2 No Recording Your Conversation Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver Personal Custom Service Setting the Alarm (Timed Reminder) – Use UM *1 NS1000 Ver1 does not support Message Waiting Lamp for SLT. *2 When SIP-Extension/ISDN-Extension makes a call to IP-PT/PS which set LCS and FWD to UM, LCS feature of IP-PT/PS does not work.

Features IP-PT SIP Extension PS SLT Timed Reminder Yes No DND set/cancel Receiving Call Waiting (Call Waiting/Whisper OHCA) CLIP/COLP COLR/CLIR Executive Busy Override Deny BGM Data Line Security Checking the Time Service Status Wireless XDP Parallel Mode - set/cancel Extension Feature Clear Log-in/Log-out Wrap-up Yes (UT13x) ICD-Group Monitor UTはTimed Reminder設定出来ないので、Hotel向けとしては使えない。

SIP Extension PS SLT Manual Queue Redirection Yes No Doorphone Call Door Open External Relay External Sensor External Feature Access (EFA) Yes (UT only) Hospitality Features ,Check-in/Check-out Remote Wake-up Call, Cleaned-up (NT346/366 only) Printing Message Walking Extension Using the Call Log Using the Directories System Feature Access Yes* * This feature is not available for NT321.

Appendix Compatible feature List (Manager Operation) – (1) Features
IP-PT SIP Extension PS SLT Extension Control Yes Time Service Mode Control- To Change the Time Mode Time Service Mode Control - Select the time service Switching Mode No Restriction Level Control Turning on the External BGM Recording OGM Trunk Busy Out Releasing NDSS Monitor Logging in to the System Manager’s Mailbox Logging in to the Message Manager’s Mailbox

Appendix Compatible feature List (Customising Phone & System) – (1)
Personal Programming Features IP-PT SIP Extension PS SLT Assigning an Extension PIN to Your Extension Yes Setting Features No Customising the Buttons (only using Web-MC)

Appendix Compatible feature List (Customising Extension & System) – (1) Manager Programming Features IP-PT SIP Extension PS SLT Changing Call Charges and Extension Control Yes (NT343/346/366) No

Appendix Registration of UT1xx which had be registered to other PBX
When you register UT1xx unit which had be registered to other PBX and PBX IP Address is different, it is necessary to clear PBX IP Address of UT1xx. [Setup] Enter [#136]  select [Factory Setting]  [Enter]  select [Yes]  [Enter]  Select [Yes]  [Enter]  UT1xx will restart Menu -> Network Setup Searching… STORE ENTER DHCP Enable Disable -> IP Address EXIT CONT NEXT IP Address ? CLEAR -> Subnet Mask Subnet Mask ? PREV

Appendix Registration of NT3xx which had be registered to other PBX
When you register NT3xx unit which had be registered to other PBX and PBX IP Address is different, it is necessary to clear PBX IP Address of NT3xx. Supply power to the NT3xx  Press [SETUP]  select [PBX]  [Enter]  select [PBX IP Address] [Enter]  select [Primary PBX]  [Enter]  Enter [PBX IP Address = ]  [Enter]  press [Cancel] 2times  press [STORE]  The NT3xx will reboot. CANCEL ENTER Menu -> PBX STORE EXIT CONT PBX -> PBX IP Adress Next -> Primary PBX PBX IP Address ? NEXT Setup Searching…

Appendix Registration Procedure of NT series Boot up the terminal.
(Own IP address is resolved by DHCP) PBX IP address resolved by “QUERY”. Already MAC Address is registered? If Yes, go to (A) Assign the port of location automatically. Registration completed. Enter Ext No by Web-MC. In service Select the location to be registered by Web-MC. Manual Mode Full Auto Mode Temporal registration. Extension Input (A)

Appendix Registration Procedure of UT1xx series
Boot up the terminal. (Own IP address is resolved by DHCP) Resolve PBX IP address by WS-Discovery. TR069 Authentication. Assign the port of location automatically. Resolve the registration port. Uconfig and Phonebook download. Download Tconfig. Set Ext No and Password that input by Web-MC to Terminal. Pre-program by Web-MC: Ext No Manual Mode Full Auto Mode Already MAC Address is registered? location that specified. WS-Discovery : Web Services Dynamic Discovery Tconfig : Data for setting Uconfig : Data for user

Appendix Registration Procedure of UT1xx series
Registration completed. In service From previous page

Appendix When change PBX IP Address, what setting do need for UT? – (1) When you change the IP Address of PBX that UT1xx unit was already registered and “IP Terminal Registration Mode” of PBX is “Full Automatic”, it is necessary to clear PBX IP Address of UT1xx. [Setup] Enter [#136]  select [IP Reset]  [Enter]  select [Yes]  [Enter]  Select [Yes]  [Enter]  UT1xx will restart automatically. Setup Now starting… Factory Setting IP Reset Back Enter No Yes ENTER Are you sure? Enter “#136” Restart

Appendix When change PBX IP Address, what setting do need for UT? – (2) When you change the IP Address of PBX that UT1xx unit was already registered and “IP Terminal Registration Mode” of PBX is “Manual”, it is necessary to install “UT_ACS.cfg” file be written new IP Address of PBX to UT1xx. Caution) Do not perform any other operation rather than following procedure with Web-MC. Otherwise the UT1xx may not work properly. Step1 : Prepare a configuration file to specify new IP Address of PBX 1. Open a text editor on a PC, and then write exactly same as the following: # PCC Standard Format File # DO NOT CHANGE THIS LINE! ### Management Server Settings ####### ACS_URL=“ Need Blank Line Notice For “xxx.xxx.xxx.xxx”, enter new IP Address of PBX 2. Save the text file as “UT_ACS.cfg”.

Appendix When change PBX IP Address, what setting do need for UT? – (2) Step2 : Access the Web user interface of UT1xx 1. Embedded Web. Press [Setting] or [Setup]  enter [#534]  select [On]  [Enter] Setup Embedded web off Back Enter On ENTER Enter “#534” 2. Access the Web user interface. 2-1 : Open your Web browser. 2-2 : Enter the UT URL to Web browser ( the UT IP address) . 2-3 : Enter user name (instoperatoruserid) and password (instpass) and click “OK”. 2-4 : The Web user interface window is displayed.

Appendix When change PBX IP Address, what setting do need for UT? – (2) Step3 : Select Maintenance tag Click “Maintenance” tag. Note : Screen shots in this document are based on UT123, 　 actual screen may vary based on the type of model.

Appendix When change PBX IP Address, what setting do need for UT? – (2) Step4 : Select Import Configuration File tag Click “Import Configuration File” tag.

Appendix When change PBX IP Address, what setting do need for UT? – (2) Step4 : Import “UT_ACS.cfg” file 1. Click “Browse…”, and select “UT_ACS.cfg” file. 2. Click “Import”. When the config file is successfully imported, UT1xx starts to access PBX automatically.

Appendix When change PBX IP Address, what setting do need for NT?
When you change the IP Address of PBX that NT3xx unit was already registered, it is necessary to assign new IP Address of PBX to NT3xx. Supply power to the NT3xx  Press [SETUP]  select [PBX]  [Enter]  select [PBX IP Address] [Enter]  select [Primary PBX]  [Enter]  Enter [PBX IP Address = x.x.x.x]  [Enter]  press [Cancel] 2times  press [STORE]  The NT3xx will reboot. CANCEL ENTER Menu -> PBX STORE EXIT CONT PBX -> PBX IP Adress Next -> Primary PBX PBX IP Address ? x x x. x NEXT Setup Searching…

Modification 20120201-01 3.0_Terminals_Rev1_1Feb2012.ppt - 1st release
_Terminals_Rev1.1_27Mar2012.ppt - Modify Page #6 Add the Note Three DN keys are assigned as default and if you delete these DN keys, you can not make or receive a call. - Modify Page #11 and #16 Add the support EHS model (Savi W740 and CS510) _Terminals_Rev1.2_9Apr2012.ppt - Add Page #93 to #99 When change PBX IP address, what setting do need for UT/NT terminals. _Terminals_Rev1.3_15Apr2015.ppt - Merge NT55, NT54, DT5 etc all new terminal up to V4.2 _Terminals_Rev1.3_03Oct2015.ppt P8 Expression improved _Terminals_Rev1.4_19Jan2016.ppt Add HDV230/330/430, NTV150/160

KX-NS1000 Terminals Rev1.4 19 Jan., 2016.

Similar presentations

Presentation on theme: "KX-NS1000 Terminals Rev1.4 19 Jan., 2016."— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

KX-NS1000 Terminals Rev1.4 19 Jan., 2016.

Similar presentations

Presentation on theme: "KX-NS1000 Terminals Rev1.4 19 Jan., 2016."— Presentation transcript:

Similar presentations

About project

Feedback