1. 66 items – 70% of circulated products
THE TREATY ON THE EURASIAN ECONOMIC UNION of May 29, 2014
Establishment and application of mandatory
requirements to products in technical regulations
Establishment of a single procedure of conformity assessment
Voluntary application of standards
Eurasian Conformity
Article 51 General principles of technical regulation
Article 52 Technical Regulations and Standards of the Union
Article 53 Circulation of Products and Enforcement of Technical Regulations
Article 54 Accreditation
Article 55 Elimination of Technical Barriers in Mutual Trade with Third Countries
Appendix 9 Protocol on Technical Regulation
Appendix 10 Protocol on Agreed Policy for Ensuring Uniformity of Measurements
Appendix 11 Protocol on Recognition of Results of Accreditation of Conformity Assessment Authorities
66 items – 70% of circulated products
42 EAEU TRs are adopted
35 CU TRs are enforced
18 projects of EAEU TRs are under drafting
27 amendments to CU TRs are under drafting
more than documents in Lists of Standards
more than of Single certificates of conformity
more than 2,0 million of Single forms of declarations of conformity

2. NEW TECHNICAL REGULATIONS OF THE UNION2
NEW TECHNICAL REGULATIONS OF THE UNION
From January 1, 2018
EAEU TR "Requirements for liquefied petroleum gases for their use as fuel" (EAEU TR 036 /2016)
Decision of the EEC Council No. 68 dated August 9, 2016
From March 1, 2018
EAEU TR "On Restrictions of the Use of Dangerous Substances in Electrotechnical and Radioelectronical Devices" (EAEU TR 037/2016)
From April 18, 2018
Decision of the EEC Council No. 113 dated October 18, 2016
EAEU TR "On Safety of Attractions" (EAEU TR 038/2016)
Decision of the EEC Council No. 114 dated October 18, 2016
From September 1, 2017
EAEU TR "On Safety of Fish and Fishery Products“ (EAEU TR 040/2016)
Decision of the EEC Council No. 162 dated October 18, 2016
From June 2, 2021
EAEU TR "On Requirements for Mineral Fertilizers" (EAEU TR 039/2016)
Decision of the EEC Council No. 150 dated November 30, 2016
From June 2, 2021
EAEU TR "On Safety of Chemical Products"(EAEU TR 041/2017)
Decision of the EEC Council No. 19 dated March 3, 2017
From August 17, 2018
EAEU TR "On safety of equipment for children's playgrounds"(EAEU TR 042/2017)
Decision of the EEC Council No. 21 dated May 17, 2017

3. DEVELOPMENT OF UNIFIED REQUIREMENTS3
Adopted at the session of the EEC Council on October 18, 2016
Procedure for the development, adoption, amendment and cancellation of technical regulations of the Eurasian Economic Union
Amendments in the Decision No. 48 of the EEC Council dated June 20, 2012
Amendments No. 147
dated
Procedure for the development and adoption of lists of standards to the EAEU TR
Implementation of the Treaty on the EAEU;
Higher transparency taking into account WTO principles;
Requirements based on international and regional standards;
Introduction of the institute for assessment of the regulatory impact at the level of the Commissions of EAEU TR and lists of standards
To replace Decision of the EEC Board No. 306 dated December 25, 2012
Amendments No. 161
dated
More interested parties in the development of the EAEU TR and Lists of Standards

4. 34 Lists of Standards to the TR 32 Standardization Programs
Standards are the main tool for the implementation of technical regulations 4
2093 standards
Republic of Belarus 415 GOSTs
Russian Federation 1,435 GOSTs
Republic of Kazakhstan 243 GOSTs
10 based on EEC
UN documents
175 based on EN documents
181 based on ISO documents
188 based on IEC documents
34 Lists of Standards to the TR 32 Standardization Programs
Development of new and innovative products
Ensuring higher quality of products, incl. for import substitution
Improvement of tools for the implementation of the EAEU TR taking into account business and consumers’ needs, current economy and technology state

5. ENSURANCE OF UNIFORMITY OF MEASUREMENTS
IS THE TOOL OF ENSURING SAFETY OF PRODUCTS
Article 51 of the Treaty on the EAEU and Annex №10
Coordinated policy of ensuring the uniformity of measurements
Application of adopted units of measurements 10
Inter-laboratory comparative tests
(inter-laboratory comparisons)
Metrological examination of draft technical regulations of the EAEU and draft lists of standards for EAEU TRs
Setting up the mechanisms of mutual recognition of results of activities ensuring
the uniformity of measurements
Based on IOLM (International Organization of Legal Metrology) principles,
CIS agreements
Verification procedure for measurement equipment
Validation procedure for the measurement methods adopted as a reference method
Type approval procedure for reference materials
Type approval procedure for measuring instruments
Mutual recognition of the results of activities ensuring the uniformity of measurements
Information exchange

6. CONFORMITY ASSESSMENT IS A NECESSARY TOOL FOR TECHNICAL REGULATION6
CONFORMITY ASSESSMENT IS A NECESSARY TOOL FOR TECHNICAL REGULATION
State registration
Certification
Declaring with the help of a third Party
Declaring on the basis of own evidences
Standard schemes
are developed based on:
laws of the EAEU Member States
using international experience (Guideline ISO/IEC 67)
and approaches adopted in the EU (Decision No. 768/2008/EU)
harm risk level
Conformity assessment forms, processes and procedure shall be determined in technical regulations of the Union on the basis of standard conformity assessment procedures

7. Single form of certificate of Single form of certificate of the type
UNIFIED FORMS OF DOCUMENTS ON CONFORMITY ASSURANCE
EEC Board Decision No. 293 dated
EEC Board Decision No. 293 dated
Single form of certificate of
conformity
Single form of declaration of conformity
Single form of Product State Registration Certificate in accordance with the CU TR
Single form of certificate of the type (CU TR "On Safety of Equipment Operating under Manometric Pressure")
Single form of certificate of the type
(CU TR "On Safety of Machines and Equipment")
Single form of the certificate of tests of lifting chains (CU TR "On Safety of Machines and Equipment")
EEC Board Decision No. 299 dated
(as amended by the Decision No. 82 dated )
EEC Board Decision No. 81 dated
EEC Board Decision No. 265 dated
EEC Board Decision No. 75 dated

8. Single Register of Certificates of Conformity Issued and Declarations of Conformity Registered
Information on issued or accepted documents on conformity assessment for products:
- included in the Single list of products subject to mandatory conformity assessment (confirmation) in the Customs Union with the issuance of single documents approved by Decision of the CU Commission No. 620 dated April 7, 2011;
- for which the technical regulation of the Union has been effected,
are introduced in the Single Register of certificates of conformity issued and declarations of conformity registered
Creation and keeping of the list shall be maintained in the order established by Decision of the CU Commission dated June 18, 2010 No. 319 (Appendix 2)

9. EAC stands for Eurasian Conformity
Products Marking
Products complying with requirements of the relevant technical regulations of the Union and having passed conformity assessment procedure set by technical regulations of the Union shall bear the unified mark of circulation of products in the market of the Union
Marking with a unified mark of circulation is performed prior to the release of the products to the Union market.
Image of the unified mark of circulation of products in the Union market and the procedure of its application were approved by Decision of the Customs Union Commission No. 711 dated July 15, 2011
EAC stands for Eurasian Conformity

10. National Accreditation Systems
Harmonisation of rules and approaches in the field of accreditation with international standards
ISO/IEC series
Accreditation
– mechanism of trust assurance
harmonization of requirements for experts
creation of national registries of experts
ensuring equal level of competences for conformity assessment bodies
increasing reliability of the results of conformity assessment
increasing responsibility of experts and organizations carrying out conformity assessment
Accreditation systems should ensure:
reliable confirmation of competences of its participants,
unified approaches to assessment of the correctness of the mandatory requirements implementation

11. INTEGRATION IN THE FIELD OF TECHNICAL REGULATION
Increasing the level of safety of circulated products
On the rules and procedures to ensure safety and circulation of products, the requirements for which are not established by the Technical Regulations of the Eurasian Economic Union
Application of equivalent approaches to surveillance on the market
On the principles and approaches to the harmonisation of legislation of EAEU member states in the area of state control (surveillance) over compliance with EAEU Technical Regulations
Products circulated on the EAEU market 1
Not included into ЕPP
 Free circulation
Included into  ЕPP
 Approved by EAEU TR
Included into  ЕPP
 National requirements
Based on Directive 2001/95/EU 2
Within the Union
Ensuring control/supervision functions based on unified rules and approaches
Risk-oriented approach
Information system for food safety
Control/supervision for products released into circulation and already in circulation, as well as relevant manufacturing processes
Based on EU Regulations No. 765/2008
Draft international agreements are developed by the Working groups consisting of specialists from authorized bodies, industry representatives, and business community

12. INTEGRATION IN THE FIELD OF TECHNICAL REGULATION12
Creation of mechanisms for the elimination of technical barriers to trade with third countries 3
On the procedure and conditions for removal of technical barriers to mutual trade with third countries
compliance of the products with the EAEU TR (in the territory of the EAEU) and legal requirements of a third country (in the territory of the third country)
mutual recognition of the results of conformity assessment by the member states and the third country
availability of an authorized accreditation body in a third country
definition of equivalence for procedures of accreditation and conformity assessment including through mutual comparative assessments
definition of equivalence for mandatory requirements
Based on WTO principles
Draft international agreements are developed by the Working groups consisting of specialists from authorized bodies, industry representatives, and business community

13. Cooperation perspectives:
INTERNATIONAL COOPERATION IN THE FIELD
OF THE TECHNICAL REGULATION
International and regional organizations:
Memorandum between the Eurasian Economic Commission and the Eurasian Economic Commission and the Eurasian Interstate Council for Standardization, Metrology and Certification
Memorandum of Understanding between the Eurasian Economic Commission and the International Electrotechnical Commission
Roadmap for cooperation on technical regulation and standardization
Cooperation perspectives:
International Standardization Organization
Euro-Asian Cooperation of National Metrological Institutions
European Committee for Standardization
European Committee for Electrotechnical Standardization

14. INFORMATION COOPERATION
The Technical Regulation and Accreditation Department
Answers to topical questions