1. SeaPerch Electrical System

2. Electrical System Overview
Assemble the control box.
Make the Cat5 connector.
Wire the motors to the tether.
Wire the control box to the battery.

3. Control Box
Identify the parts and where they go.

4. Solder Parts to Circuit Board
1 fuse socket
2 push buttons
1 tether socket
2 toggle switches

5. Power Cable & Circuit Testing
Solder the power cable.
Visually inspect the circuit board for “shorts” and “blobs”.
Conduct an Ohm meter test.
Mount the board to the box.
Attach alligator clips to the other end of the power cable. This allows the cable to be connected to the battery.