1. Electronics & Machine Shop
Markus Friedl
HEPHY Scientific Advisory Board
21 October 2010

2. Mission Statement
Development & maintenance of high-tech electronics & precision mechanics for HEP experiments
Electronics: In-house circuit design, assembly, firmware development and testing
Mechanics: Precision machining of prototypes and small series
Support for CMS-Trigger, CMS-Tracker, Belle and Outreach projects
21 October 2010
Markus Friedl

3. List of Members Electronics Machine Shop 13 persons, 10.5 FTE
7 permanent staff, 4 limited contracts, 1 diploma student, 1 emeritus
Head: M.Friedl
Members: B.Arnold, H.Bergauer, M.Eichberger, I.Gfall, C.Irmler, M.Pernicka, J.Pirker, B.Rahbaran, S.Schmid, T.Schreiner, H.Steininger, T.Taurok
Machine Shop
2 persons, 2.0 FTE
1 permanent staff, 1 limited contract
Members: M.Oderits, R.Stark
Some of the group members
21 October 2010
Markus Friedl

4. Skills Schematics design, PCB layout Testing Assembly Machining
Software
development
FPGA programming & simulation
Beam tests
21 October 2010
Markus Friedl

5. Equipment (highlights)
BGA soldering machine
CNC milling machine
8 GHz real time oscilloscope
Pick & place machine
Vapor phase soldering machine
21 October 2010
Markus Friedl

6. Present Activities CMS Belle II Outreach
Trigger & Pixel: firmware improvements, maintenance
Trigger & Pixel: R&D for CMS upgrade
Belle II
Silicon Vertex Detector for Belle II: R&D for detector module, mechanics, cooling, readout & control system
Outreach
Animated LHC wall poster (6 x 6 m2)
Interactive hands-on LHC model
21 October 2010
Markus Friedl

7. Present Activities – CMS Trigger
PSB_opt
(Pipelined Synchronising Buffer)
3.2Gb/s optical links instead of cable (unreliable)
Trigger upgrade
Migrate from VME to µTCA (modern telecom standard)
„One board fits all“ – only single (few) hardware card(s) with variety of firmware
Xilinx Virtex 6
FPGA
Matrix Module
switch
μTCA
OPTICAL I/O
DDR2/3
21 October 2010
Markus Friedl

8. Present Activities – CMS Tracker
Pixel-FED upgrade
Continuous improvement of firmware with collisions
Firmware modified for heavy ion mode
Digital optical link instead of analog
Partly re-using existing components
21 October 2010
Markus Friedl

9. Present Activities – Belle II R&D Origami Chip-on-Sensor Concept
Thinned readout chips (APV25) on sensor
Flex fanouts wrapped around the edge for readout of rear side strips
All readout chips are aligned  single cooling pipe
Shortest possible connections  high signal-to-noise ratio
~60cm
Ladder configuration
21 October 2010
Markus Friedl

10. Present Activities – Outreach
Interactive hands-on LHC model
Animated LHC wall
21 October 2010
Markus Friedl

11. Present Activities – Teaching Equipment
Cosmic muon setup
Scintillators can be rotated
Will be used for student’s course at TU Vienna
21 October 2010
Markus Friedl

12. Timeline of Papers, Talks and Posters
Technical Publications as of 21 October 2010
(until today)
21 October 2010
Markus Friedl

13. Achievements Belle II CMS
M.Friedl is co-convener of the Belle II Silicon Vertex Detector group
M.Friedl is editor (and main author) of the chapter Silicon Vertex Detector of the Belle II TDR
CMS
CMS Achievement Awards (19 March 2010):
T.Taurok
M.Pernicka
J.Erö (CMS Trigger)
21 October 2010
Markus Friedl

14. Recent Sales Equipment purchased by others
Several APVDAQ standalone readout systems (total value 45k€)
Customers 2009–2010: Osaka, Kyoto, Santander, KEK, Seoul
Interactive hands-on LHC model (total value 6k€)
2 orders from national science exhibitions
Animated A0 LHC wall picture (total value 8k€)
2 orders from Karlsruhe and Museum of Technology Vienna
21 October 2010
Markus Friedl

15. Future Plans Belle II CMS Outreach
Production of full silicon vertex detector (together with semiconductor group) with mechanics, cooling and complete readout chain
CMS
Trigger: Development of Global Trigger for CMS upgrade
Tracker: Upgrade of Pixel-FED
Outreach
New, improved spark chamber for our exhibitions
Generic (motivated by Belle II and CMS)
Fast serial links
FPGA design & simulation, embedded programming
21 October 2010
Markus Friedl

16. Thank you for your attention.

17. Backup Slides
21 October 2010
Markus Friedl

18. Belle II – Origami Module
Some Objects Made by Us
CMS – Analog Optohybrid
Belle II – Origami Module
Belle II – Thinned APV25
CMS – Pixel-FED
CMS – Global Trigger
Outreach – Spark Chamber
21 October 2010
Markus Friedl

19. Completed Projects DELPHI NA48 Outreach CMS Belle
FCA & VFT subdetectors
LTD electronics boards
NA48
Clock distribution
Calorimeter trigger
960 MHz-ADC system
Outreach
LHC2008 exhibition
CMS
Drift Tube Trigger
Global Muon Trigger
Global Trigger
Central Trigger Control
Analog Optohybrid
Pixel-FED
Belle
FADCs for Silicon Tracker (SVD2)
21 October 2010
Markus Friedl

20. Present Activities – Belle II R&D
Full readout chain to DAQ
To be designed and built by HEPHY
Prototypes exist for all stages
Origami module
FADC+PROC VME
Repeater box
Data processing and hit time finding (~3ns RMS) in FPGA firmware
21 October 2010
Markus Friedl

21. Completed Projects – LHC2008 Exhibition
GRID globe (live data)
LED- animated 3D-LHC
model
Light queue (data transfer from CMS to GRID)
CMS Optohybrid mobile
21 October 2010
Markus Friedl