1. Lined Manifolds datapipe MĂGURENI CONSTRUCŢII S.R.L.
Măgureni, Prahova County
ROMANIA
Tel.: (021) / (0244)
Tel./Fax: (021) / (0244)
Lined Manifolds

2. MĂGURENI CONSTRUCŢII HQ

3. MĂGURENI CONSTRUCŢII manufactures, sells and installs lined manifolds
OMV-Petrom, the largest oil company in Romania is one of our major clients
Over 450 inside-coated (lined) manifold lines have been in operation in the OMV-Petrom facilities since 2007
Lining is done with a special polymer, ensuring total protection against corrosion and abrasion, avoiding costly leaks and shutdowns
Specific existing designs can be easily reengineered to facilitate the lining process

4. There are generally two types of manifolds:
Oil collection manifolds – concentrating oil wells into parks
Water injection manifolds – used for injecting the water resulted from crude oil separation

5. Schematic of a 4-well oil collection manifold produced by MĂGURENI CONSTRUCŢII

6. Schematic of a 4-line water injection manifold produced by MĂGURENI CONSTRUCŢII

7. Complex piping systems, such as our manifolds, are lined (inside coated) with a continuous and seamless polymer layer providing total corrosion and abrasion protection, so that the fluid is no longer in contact with the steel.

8. System Features
The polymer layer is usually 3 mm thick; this does not reduce the flow, due to the lower friction coefficient of the fluid against the polymer
When the original design requires an amount of corrosion allowance, this can be replaced by the polymer layer, while keeping the same internal diameter of the piping system
Fluid temperatures up to 50 °C
The use of other polymers make possible higher fluid temperatures
The polymer has a good resistance to the chemical compounds of crude oil

9. Design and Manufacture
The design is done by our team of design engineers using high performance CAD software (SolidWorks®),
Manufacturing is done using welding tables, orbital welding machines, CNC machine tools and high quality stainless steel or Nedox® coated valves (choke valves, ball valves, disk-check valves).
Each stage of the manufacturing process is monitored by a thorough quality inspection
SolidWorks® is a trademark of Dassault Systèmes, S. A.
Nedox® is a trademark of General Magnaplate

10. Orbital welding machine

11. CNC

12. In our endeavour to provide the best practices of quality, environmental and occupational health and safety management systems, our company has been certified by TÜV Austria for ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007.

14. We have also been accredited by TÜV Austria for the production of pressure equipment according to PED 97/23/EC (ISO ); the E1 and D1 certification authorizes us to affix the marking to our manifolds.

16. Benefits
The long service life while avoiding costly repairs and shutdowns, makes our product a very good investment
Almost no maintenance required
Lower quality steel grades and thinner pipe walls can be used, reducing the cost of the system
Totally environmentally friendly

17. Photo Gallery
98-well oil manifold at Park 20 Silistea, Romania

18. 7-well water injection manifold at Park 700 Boldesti, Romania

19. 16-well oil gathering manifold and 4-wells gas gathering manifold at Park 7 Roata, Romania

20. Thank you!