1. SeaPerch Electrical System

2. Electrical System Overview Assemble the control box. Make the Cat5 connector. Wire the motors to the tether. Wire the control box to the battery.

3. Control Box Identify the parts and where they go.

4. Solder Parts to Circuit Board 1 fuse socket 2 push buttons 2 toggle switches 1 tether socket

5. Power Cable & Circuit Testing Visually inspect the circuit board for “shorts” and “blobs”. Conduct an Ohm meter test. Mount the board to the box. Solder the power cable. Attach alligator clips to the other end of the power cable. This allows the cable to be connected to the battery.