1. Properties of Earth’s Interior

3. Lithosphere: the solid outermost part of Earth – Includes the crust and upper mantle

4. Crust: the rocky solid shell that floats on the asthenosphere – Includes the ocean floor

5. Asthenosphere: plastic mantle- made of molten material

6. Mantle: Located between the crust and the core

7. Outer core: liquid- moves around the solid inner core creating a magnetic field

8. Inner core: solid

9. ESRT page 10

10. MOHO: the boundary between Earth’s crust and upper mantle

11. Earthquakes An earthquake is the shaking of Earth’s crust caused by a release of energy

12. Possible causes? Interaction between lithospheric plates

13. Damages Buildings and bridges collapse, fires, water shortage

14. Focus Located underground where the movement or break began

15. Epicenter Located on Earth’s surface directly above the focus

16. Occur at.. Plate boundaries

17. P waves Compression/ primary waves 1) back and forth motion 2) travel fastest- arrive first at a location 3) travel through solid, liquid, or gas

18. S waves 1) travel perpendicular to the direction of movement 2) about half the speed of P waves 3) travel only through solids

19. As seismic waves travel through earth’s interior they bend (science word). Creates a Shadow zone: areas that get no earthquake waves

21. Locating the epicenter Minimum of 3 seismic stations needed.

22. Measuring Earthquakes Richter scale: measures an earthquake’s magnitude. – Uses seismographs – Each successive number is 10x greater than the previous

25. Measuring Earthquakes Mercalli Scale: measures earthquakes intensity based on reports from people who experienced the event

27. How to Use the Earthquake Travel Time Graph (Page 11 of the Earth Science Reference Tables). The graph on page 11 can be used to find several different variables. Let’s start with: A seismic station is 3000 kilometers from the epicenter of an earthquake. How long will it take P waves from this earthquake to reach the seismic station?

28. We know the distance (3000km) We’re trying to find the time it will take P waves to travel this distance. Find 3 (really 3000km) on the bottom axis and, using a straight edge (a ruler) draw a line up to meet the P wave line. Now, using the ruler, draw a line over to the left axis and read the travel time: 5 minutes and 40 seconds. Notice that each small box is worth 20 seconds. Now try the same problem in reverse: It takes P waves 5 minutes and 40 seconds to travel from an epicenter to a seismic station. How far is the seismic station from the epicenter?

29. We know the P wave travel time: 5 minutes and 40 seconds. We are trying to find the distance between the epicenter and the seismic station. Using a ruler, draw a line from the time (5:40) to the P wave line. Now draw a line straight down to the bottom axis and read the distance............. 3000 kilometers! All of these problems are the same. Given the time, find the distance. Given the distance, find the time. And it doesn’t matter whether you are given P or S wave travel time as long as you are careful to use the correct line and, most important: TAKE THE TIME TO BE CAREFUL AND ACCURATE!

30. It takes P waves 7:20 (7 minutes and 20 seconds) to travel from an earthquake epicenter to a seismic station. How long will it take S waves from the same earthquake to reach the seismic station? We have to divide the problem into 2 parts. First, we do just what we did in the previous problem. We use the P wave travel time to find the distance to the seismic station and then................................. We use the distance to the seismic station to find how long it took S waves to travel that same distance. Let’s see how it’s done....................................

31. We know P wave travel time is 7:20 so, using a ruler, draw a line from 7:20 over to the P wave line. Now draw a line straight down to find the distance from the epicenter......... The distance is 4200 km. Notice that each small box on the bottom axis is 200 km. Now we can get on with the second half of the problem. If the seismic station is 4200 km from the quake epicenter, how long (time) did it take the S waves to travel that same distance? Draw a line from 4200 km straight up to the S wave line. Now draw a line over to the vertical axis and read the time.......... 13 minutes exactly (13:00) And now for something completely different.......................

32. Let’s take this one step further. A seismic station is 3000 km from the epicenter of an earthquake. If P waves from that quake arrive at the station at 4:25:40 PM (4 hours, 25 minutes and 40 seconds), at what time did the earthquake occur? We do exactly the same thing we did before, we find the travel time which is 5:40 (5 minutes, 40 sec.) Now some math. If the waves arrived at 4:25:40 and they’ve been traveling for 5:40, when did they start out? Subtract: 4:25:40 5:40 ------------ 4:20:00 The quake occurred at 4:20:00 PM

33. Determining Arrival Time Differences 1. find the distance on the bottom of the chart 2. place a scrap paper vertically for that distance 3. Mark the scrap paper where the s wave and p wave touch it. 4. move the paper to the left of the chart. Place one mark at zero and read the time using the mark above it.

35. Determining Distance using differences in time 1. Place a scrap paper on the left side of the chart 2. Mark the zero and the arrival time difference on the paper 3. keep the paper vertical and move it to the right until the top mark is touching the s wave line and the zero mark is touching the p wave. 4. follow the paper down and read the chart to determine distance

36. A seismic station is 3000 km from the epicenter of an earthquake. How long after P waves arrive will S waves from the same earthquake arrive at the station? This time place your paper on the 3000 km mark taking care to keep the paper straight and to cover both the P and S wave lines. Make small, thin, and accurate marks where your paper crosses the P line and the S line. Then..............................

37. Another type of question involves the “difference in travel time between P waves and S waves”. Whenever you are given the difference in arrival times OR you are given both times so that you can subtract and find the difference, you should immediately realize that you will be dealing with the shaded area (yellow) between the two lines. Here’s a sample problem: P waves arrive at a seismic station 4:30 (4 minutes, 30 seconds) before the arrival of S waves from the same earthquake. How far from the epicenter is the seismic station?

38. Here’s what you know: P & S waves arrive at a seismic station 4 minutes and 30 seconds (4:30) apart. You are asked to find the distance to the epicenter. Here’s how: 1) Take a sheet of paper and line up the left edge with the vertical axis (time). Be sure that most of the paper is hanging down below the graph. This is important. 2) Make a small, thin, and accurate mark on the paper at 0 time. Make another small, thin, and accurate, mark at 4:30 (4 minutes, 30 seconds). Your 2 marks are now 4:30 apart!

39. Now slide your paper to the right until one of your marks is exactly on the S wave line and the other is exactly on the P wave line. It is very important to be sure your paper is straight (vertical). Now look to see where the bottom of your paper crosses the lower (epicenter distance) axis. In this case it crosses at exactly 3000 km which is the answer. When P & S waves arrive 4 minutes and 30 seconds apart it means that the seismic station is exactly 3000 km from the epicenter of the quake. Of course we can do the same problem in reverse!

40. One last kind of problem to become familiar with. Sometimes, instead of giving you the difference in arrival times, you will be given a seismogram (a record made by a seismograph) instead. Using this seismogram find when the P waves and the S waves arrive. Do this by carefully making a mark at the P wave and S wave arrival times. Now count the number of minutes between the arrival of P and S waves at the station. From this point on it’s just like the previous problem: If the difference in arrival times between P and S waves is 6 minutes, how far is the seismic station from the epicenter of the earthquake?

41. One last type of problem: Find the ‘time of origin of the earthquake’. In other words, use the information given to find out when the quake occurred. Here’s a sample problem: A seismic station is 4000km from the epicenter of an earthquake. P waves arrive at the station at 2:48:00 PM. At what time did the earthquake occur? First, use the distance to find the P wave travel time. OK, the P waves took 7 minutes to travel the 4000km distance. If they arrived at 2:48:00 and the trip took 7 minutes, they must have started out 7 minutes before 2:48 PM So subtract. 2:48:00 - 7:00 --------------- Origin time: 2:41:00 PM

42. Let’s try another one: P waves arrive at a seismic station at 4:22:10 AM. S waves from the same earthquake arrive at 4:28:50 AM. What is the time of origin of the earthquake? First subtract to get the difference in arrival times: 4:28:50 - 4:22:10 -------------- difference = 6:40 (6 min, 40 sec) Now, as we did before, get a piece of paper and carefully and accurately make marks at time 0 and time 6:40

43. Slide the paper until one mark is on the P wave line and the other is on the S wave line. Now read the distance from the epicenter on the bottom: 4000 km. Now that we know the distance to the epicenter we can easily tell how long it took P waves to travel that distance. P waves took 7 minutes to travel the 4000 km and since they arrived at 4:22:10 we can subtract to find out when they started. 4:22:10 - 7:00 -------------- Origin time: 4:15:10

44. Plate Tectonics Continental Drift: The theory that Earth’s crust is resting on a fluid which allows it to move – The crust is broke up into pieces called plates that move relative to each other

45. Evidence for Continental Drift Shape of the coastlines: continents fit together

46. Evidence for continental drift Correlations: fossils match across ocean basins – Rocks match across ocean basins

47. Evidence for continental drift Climate changes: coal found in Antarctica. – Glacial striations in Australia and Africa.

52. What happens to the age of oceanic crust as distance increases from a ridge?

53. Age of Oceanic Crust Courtesy of www.ngdc.noaa.gov

54. Movement of Plates Convection currents within the asthensphere move the plates that rest on the top

55. Convection currents Currents caused by differences in density

56. Rising currents Causes the plates to move apart- divergent plate boundaries

57. Falling currents Cause the plates to move together- convergent plate boundaries

58. Divergent boundaries A location where two plates are moving away from each other As plates separate, water fills low areas Formation of mid-ocean ridges Youngest rock located at center

59. Divergent plate boundaries Some igneous rocks contain minerals that are magnetic Instruments measure small changes in magnetism Bands of igneous rock on the ocean floor show that Earth’s magnetic orientation has been reversed in the past

60. Divergent plate boundaries Crust must have shifted Magnetic reversal supports sea floor spreading

61. Evidence that plates are moving apart: Ocean floor is generally younger than the continents Rocks continually form at mid ocean ridges. Heat flow is highest at the spreading center Magnetic reversal

62. Continental/ Continental NOT Collision Two plates collide Cause crust to be pushed upward, forming mountain ranges – Himalayan – Andes Convergent boundaries

63. Continental/Continental Effects: – intense folding and faulting, – a broad folded mountain range, – shallow earthquake activity,

64. Subduction boundaries One plate goes under (subducted) the other plate

65. Ocean/Continental Plates Ocean plate is more dense than the continental plate and is subducted Bordered by a mountain chain and volcanoes on the continental plate – Andes mountains

66. Ocean/Continental Effects: – earthquakes – ocean trench off shore of the continent, – a line of volcanic eruptions inland from the shoreline.

67. Ocean/ Ocean Plates one ocean plate is subducted under the other. Usually the older one Effects: – deeper earthquakes – an oceanic trench – a chain of volcanic islands

68. Transform Boundaries Plates that slide past eachother Stress builds up between plates Major earthquakes – San andres fault

69. Bench Marks Locations labeled with exact elevation Able to measure the change in elevation

70. Uplift of fossils Fish and marine fossils found on mountain tops

71. Subsidence of fossils Shallow water fish buried deep in the ocean floor

72. Looking at rock strata folded faulted

73. Looking at rock strata Undisturbed tilted

74. Hot Spot A place where magma is coming through earth’s crust – Hawaiian islands

75. Hot Spots Hot spots occur where rising material from the lower mantle remains stationary for millions of years. When a plate moves over the rising materials, it melts. Become regions of intrusive and extrusive volcanic activity that can build volcanoes and lava flows. Can also push up regions to create mountains.

76. Hot Spots Cont. As the plates move over the rising material, a series of volcanic mountains can form for thousands of miles. These trails show the path of the plates past movements.