1. Features  Play music in SD card  Local FM Radio  Audio input interface  Audio output interface  play music from FTP SB-Z-Audio

2. Connection diagram NOTE: Ethernet port of it can be used for configuration and controlling, but HDL-BUS port of it can only be used for controlling.

3. Programming Start up: 1.Find a SD card (<8GB, recommend to use Kingston brand) and format it as FAT32 (right click the SD and you will the option). Create several folders in SD card and put some songs (.mp3 format) in them (folder name < 21 characters, song name ≤ 25 characters), then Power off Z-Audio and insert the SD card. 2. Power on and press the reset button (a very small button) on Z-Audio, the Z-Audio will acquire the default IP 192.168.10.250, then set the IP of PC as 192.168.10.x, see if the Z-Audio can be pinged successfully.

4. Programming Check the IP and MAC and port (default:6000), make sure there is no IP or MAC conflicts.

5. Programming Refresh the playlist, you shall be able to see the songs here.

6. Programming Enable/disable music sources, (these three functions are not ready: “Intercom”, “Web-radio”, “Server”) Canceled function

7. Programming Run FTP server in PC, e.g., “Home Ftp Server”. (see configuration video about Home Ftp Server ftp://59.41.255.150/softwares/HDL%20tutorial%20video/module%20tutorial%20video/12.%20Z-Audio%20and%20DLP/ The IP of PC in which the FTP server is running. The account and password pre-created in FTP

8. Programming Settings in DLP panel One DLP can control 24 Z-Audio ID of Z-Audio

9. Key1 left: press to shift audio source (long press to change settings ) right: PLAY/PAUSE Key2 Previous/Next playlist Key3 Previous/Next song Key5 turn pages Key4 Volume increase/decrease When songs in SD card or FTP changed, you can long press the first button (left part) of DLP to get the menu to refresh the playlists.