Office of Highway Safety Sight Distance and Roadway Condition Dan Walsh, P.E.

Slides:



Advertisements
Similar presentations
CE 436/536 – ROADWAY DESIGN January 22, 2008 Review Homework Assignment Did any of our discussion from last week make you notice anything different about.
Advertisements

Safe Driving Rules and Regulations
Safe Driving Rules and Regulations
Sight Distance Sight distance is defined as the length of carriage way that is visible to the driver. The minimum sight distance should be sufficiently.
Interactive Highway Safety Design Model (IHSDM)
SCHOOL BUS TRAFFIC CONTROL DEVICES
From… Maintenance Technical Advisory Guide (MTAG) Chapter 2 Surface Characteristics.
Safe Driving Rules & Regulations  Speed Control Speed Control  Passing Passing  Keeping to the Right Keeping to the Right  Yielding the Right-of- Way.
Defensive Driving & Safety Rules Chapters 3 and 4 in Work Book.
Rural roads are made up of different types of materials 82% of road in U.S are rural Rural roads are made up of different types of materials.
US Highway 17 (Center Street) Sidewalk Feasibility Study Town of Pierson, Florida.
Delaware State Driver’s Education Study Guide. Drivers have trouble seeing motorcycles in traffic. Why?
SPEED LIMITS Joe Gorfida, Jr. Main Office: (214) Direct Dial: (214) TEXAS MUNICIPAL COURTS EDUCATION CENTER 2012 Municipal.
Florida Department of Transportation, November 2009
Chapter 4.
Office of Highway Safety Tire Testing and Simulations Lawrence E. Jackson, P.E.
Blind Spots at Intersections and Crosswalks
Office of Highway Safety Highway Factors David Rayburn.
HERO UNIT Training Module Work Zone Traffic Control And Incident Management Operations.
SIGHT DISTANCE Spring 2015.
Chapter 4 Speed control A motorist must always obey the speed limit. A good rule is to keep up with the flow of traffic at any legal speed. In order.
OBJECTIVES  We will define driver information processing and apply processing principles to determine roadway position, establish vehicle speed, and communicate.
Sight Distances CE 453 Lecture 8.
DRIVING TOO FAST FOR CONDITIONS A Collision Countermeasures Presentation.
Safe Stopping Distances Bob Williams 2009 UNL Science & Math Technology Institute.
Know the definitions of different types of sight distances
Guidelines for Traffic Control at Surface Mines
Created and Presented by Chelsea Jean Leppanen CVTC Safety Coordinator.
Driving at Night & in Inclement Weather. Visibility The single biggest contributor to crashes is failing to identify a risk! Tips for cutting down those.
Sight Distances Distance a driver can see ahead at any specific time
PAVEMENT MARKINGS, TRAFFIC SIGNS, LIGHTS,
Rules and Regulations for Safe Driving
Horizontal Alignment.
Safe Driving Rules and Regulations
Driving at Night & in Inclement Weather. Visibility The single biggest contributor to crashes is failing to identify a risk! Tips for cutting down those.
THE HISTORY OF MOBY-DICK David J Russell II. GEOMETRIC DESIGN AND OPERATIONAL FACTORS THAT IMPACT TRUCK USE OF TOLL ROADS David J Russell II.
Office of Highway Safety Commercial Vehicle Tires and Testing Jennifer Russert.
Speed Limits, Speed Control and Stopping Regulations.
Rules and Regulations for Safe Driving
MODULE 5 Objectives: Students will learn to recognize moderate risk environments, establish vehicle speed, manage intersections, hills, and passing maneuvers.
Defensive Driving & Safety Rules RESTRAINT SAFETY Seat Belt Law GDL: All Who has to wear under basic license? All Seat belts prevent –Being thrown from.
Chapter 5 DefensiveDriving Standard Accident-Prevention Formula Be Alert - Never think the other driver will not make a driving mistake. Be Prepared.
Geometric Design (I). Learning Objectives To understand the considerations and quantifiable aspects of geometric design.
1 Tobit Analysis of Vehicle Accident Rates on Interstate Highways Panagiotis Ch. Anastasopoulos, Andrew Tarko, and Fred Mannering.
Virginia Department of Education
Intersections.
Driving Environments. Rural Driving  The speed limit on rural roads when not posted is 35 mph.  Many rural roads are two-lane, two-way roadways.  Curves.
Mike McColeman, P.E. Assistant Maintenance Administrator Ohio Department of Transportation Defining Desired Outcomes Defining Desired Outcomes.
© 2006 PSEN Unit - #4 Let’s Go Driving Identification Evaluation Control Monitor.
Chapter Four Safe Driving Rules and Regulations. Speed Control: A.Speeding is a common cause of fatal accidents. B.Keep up with the flow of traffic at.
Regulatory Signs Must be obey Prohibited Examples:
Edward L. Fischer P.E..  Ed, it was hard to read slides from back of room with this background.  Can I change it? Nancy Brickman.
Office of Highway Safety Introduction David S. Rayburn.
Traffic Signs Part Two. What do these 2 signs tell you?
Driver Education Introduction to driving in New Jersey Notes and Study Guide.
Chapter 4 Rules and Regulations for SAFE DRIVING.
CHAPTER 5 DEFENSIVE DRIVING. I. Preventing Accidents A. Most accidents are caused by driver error. B. Standard Accident Prevention Formula: 1. Be Alert.
 Signs that set limits or give commands are regulatory signs. Regulatory sings control traffic.
Do Now Questions 1. When parking downhill on a street with a curb, the vehicles wheels should be? 2. The most common type of parking on city streets and.
Defensive Driving & Safety Rules RESTRAINT SAFETY Seat Belt Law GDL: All Who has to wear under basic license? All Seat belts prevent –_______________________.
Intersections.
Blind Spots at Intersections and Crosswalks
ALABAMA COURSE OF STUDY #2, #3, #4, #5, #6 AND #7
Good timing is critical to safe driving
Good timing is critical to safe driving
HERO UNIT Training Module
CHAPTER 4 SAFE DRIVING RULES & REGULATIONS
Lecture Sight distances.
lesson 9.4 STOPPING DISTANCE
Example of cones and signs as traffic control at a roadway incident.
Presentation transcript:

Office of Highway Safety Sight Distance and Roadway Condition Dan Walsh, P.E.

Summary Sight distance and variable speed limit signs Roadway conditions Wet Weather Accident Reduction Program

Interstate 35 I-35 constructed in 1955 No change in vertical profile 60 mph design speed Design speed is maximum safe speed 70 mph posted speed limit 74 mph 85 th percentile speed

Sight Distance Roadway ahead visible to driver Long enough to allow a vehicle traveling at design speed to stop

Available sight distance 767 feet

Stopping Sight Distance Distance traversed from object detection to stop Should be less than available sight distance 900 feet at 60 mph 1,293 feet at 70 mph Exceeds available sight distance of 732 to 767 feet

Variable Speed Limit Signs Alert drivers to reduce speeds in hazardous conditions Increase safety – Washington (Snoqualmie Pass) – New Jersey Turnpike More cost-effective than reconstruction

Macrotexture Pavement Depth Affects water drainage No national standards TxDOT research recommended inch Accident site – to inch in right lane – to inch in left lane

Rut Depth Water accumulation TxDOT recommends resurfacing when ruts greater than 0.5 inch Shallow rut depth problem – Right wheel path: 0.25 to 0.35 inch – Left wheel path: 0.40 to 0.42 inch Differing rut depths can lead to rotational forces on vehicle

Roadway Friction FHWA does not specify minimum Texas Pavement Management Information System – Accident site coefficient of friction 0.12 in 2000 – Half of interstates in Texas have coefficients of friction 0.26 or below Coefficients of friction on ice range from 0.12 to 0.25

Texas Wet Weather Accident Reduction Program Identify locations overrepresented in wet weather accidents 5 accidents within 1/10 mile segment Short distance for interstate highways

Weighted toward identifying locations in high population areas I-35 accident location – 16 percent of accidents in wet weather – 2.35 percent wet weather exposure Poor geometry, rutting, low macrotexture, and low friction Texas Wet Weather Accident Reduction Program

Limited guidance from FHWA Each State has its own method Illinois DOT relies on friction Wet Weather Accident Reduction Program