DAELIM PLAVIS Parts for SEMICONDUCTOR Vacuum Pick-up Tools ; To stable pick-up chips during packaging process. PLAVIS vacuum collets meet needs for processing condition. And also, PLAVIS are easily machined to the small figure required the precise tolerance. Insulator for Die-bonder ; PLAVIS insulator can isolate heat transfer and protect the die bonding shaft. Bushing in ESC ; These bushing located in ESC to shield wafer lift pin. A bushing using the wafer handling should be withstand processing temperature and plasma environment. and also protect the metal lift pin by function of thermal insulation, self lubricating. Insulator in ESC ; The excellent performance over a various processing condition of PLAVIS can protect the metal parts from the severe processing condition. Test Socket for IC handling & testing ; PLAVIS parts have the excellent dielectric performance and outstanding mechanical properties needed in equipment for testing and handling IC in packaging process. The PLAVIS parts meet need for dimensional stability over a wide range of temperature.

DAELIM PLAVIS Parts for Flat Panel Display Ball Transfer ; Glass-making furnace and move through various manufacturing steps in clean room condition. By having its excellent wear and physical properties, it helps to increase product life & less maintenance. Prevent the glass scratch & breakage that brings the higher manufacturing efficiency level, which help to have multi-direction instead of one direction at production line.. Proximity Pin ; This is a support pin that glass goes very close to the oven at drying process with Hot Plate method. It is chosen to due to the poor results with parts made out of a variety of other because of thermal property that other materials have. The requirement of HP process, it gets the direct heat during this process. Due to its excellent property of wear and thermal resistance, it gives prevention of scratch and crack on the LCD Glass. Minimizes particulate contamination. Lift Pin Bush ; Lift Pin Bush is for protecting the lift pin in LCD Photo resist coating process. It is needed high thermal resistance, electrical insulation property, free of particle generation and chemical resistance. PLAVIS can be resisted against high load that brings good stability for the product and improve product-life by having its chemical resistance. Glass Holder & Pad for Sputtering Process ; Materials for sputtering should maintains mechanical property at high temperature. And also, no particle generation, low out gassing. PALVIS can be used to prevent the surface damage and scratch and help to reduce the attrition rate for users that able to promote efficiency level for production

DAELIM PLAVIS Support/Lift Pin for LCD Glass ; Lift pin for the flat panel display purpose as support & lift pin for the LCD Glass panel at the LCD manufacturing process. Property requirements are no particle generation, low out gassing and maintains its mechanical strength at high temperature. Support/Lift pin made by PLAVIS show the best performance in this process. Robot Arm Vacuum Pad ; These are applied for protecting damage between LCD conveyer, robot arm, and LCD equipment. Property requirements are heat deflection temperature, no particle generation and dimensional stability. Due to its excellent property of wear and thermal resistance, it give prevention of scratch and crack on the LCD glass. Support Pad in PDP sputter ; This part plays an important role as side pad to support the glass when PDP glass(T:1.6mm) transfer verticality at ITO sputter equipment. Property requirements are relative thermal Index, high HDT wear-resistance and free of particulate, excellent thermal conductibility. Ball bearing ; It is bearing for LCD conveyor system in drying process. Property requirements are wear resistance in the non- lubricant condition, excellent thermal resistance and free of particle generation etc. PLAVIS bearing is the unique something new. Glass Holder ; It is a holder for LCD glass in the glass heating process. Property requirements are high thermal resistance, HDT, low out gassing, thermal insulation and creep resistance. Multi performance of PLAVIS gives stability to hold the LCD glass