Cutting Metals Quiz

Name the tool shown below Tenon Saw Name the tool shown below Junior Hacksaw Dovetail Saw Panel Saw Piercing Saw Rip Saw Hacksaw Flush Cut Saw

2.Which direction should the teeth on a hacksaw point? Backwards Forwards Does not matter

3. Which picture shows the correct way of holding metal in the vice when using a Hacksaw? Picture A Picture B

4. Name the tool shown below Tenon Saw 4. Name the tool shown below Junior Hacksaw Dovetail Saw Panel Saw Piercing Saw Rip Saw Hacksaw Flush Cut Saw

5. Name this hand tool.. Tin snips Guillotine Engineers Pliers Diagonal Cutters

6. What is wrong in this picture? The bar being cut should be further back in the jaws Round bar should be cut in the shear hole The bar is too big to be cut in this way The bar being cut should be further forward in the jaws

Click here for next question

7. Why does the Gabro guillotine produce more waste material than the bench shears? Bench Shears Because the cutting action produces a waste notch Because the Gabro guillotine can cut thicker metal

8. Which tool is most suited to cut 25mm steel rod? Tinsnips A Jnr Hacksaw The Guillotine A Hacksaw

9. Which tool is most suited to cut 300 x 300 x 0 9. Which tool is most suited to cut 300 x 300 x 0.5mm steel sheet into strips ? 0.5mm steel sheet Tinsnips The Gabro guillotine Jnr Hacksaw A Hacksaw

Quiz Completed Well Done

 Wrong Click here to try again