AUDIO VISUAL TRAINING Vaughn Eames-Lite Class

LITE CLASSROOM EQUIPMENT Lite Class LCD Projector/Built In Screen Laptop Connection (VGA Cord) Control Panel A/V input for DVD/VCR Player

TURNING ON A/V SYSTEM Lite Class Press the “POWER” button located on the top of the control panel and the projector will begin turning on.

PROJECTING A LAPTOP Lite Class Once the projector is on, press the “SOURCE” button until the projector displays “Input A” on the top right side of the screen.

PROJECTING A LAPTOP Lite Class If you don’t have a “SOURCE” button on your control panel, press the “COMP” button on the control panel to display your laptop.

PROJECTING A LAPTOP Lite Class Plug in your laptop to the *VGA cord located in the grey box. If you have a Mac laptop use your VGA adapter. *Do not bend or yank on the VGA Cord as this will cause it to break.

PROJECTING A LAPTOP Lite Class If your PC laptop does not project onto the screen, press and hold the “FN” key located on the bottom left hand side of your laptop’s keyboard. While holding the “FN” key press the “F8” key, if you have a Dell laptop. “ F4” key, if you have an HP laptop. or “F5” key, if you have a Toshiba/Sony laptop. Then release them both at the same time.

PROJECTING A LAPTOP Lite Class If your Mac laptop does not display go into your System Preferences and double click “Displays”. When Display window opens, click “Detect Displays”. Then click on the “Arrangements” tab. After Arrangement Tab opens check the box in the bottom left hand corner that says “Mirror Displays”.

PROJECTING A LAPTOP Lite Class To adjust the volume coming from your *computer press the “VOL ” and “VOL ” buttons on the bottom of the control panel. *Please note, volume must also be turned up on your laptop to receive sound.

PROJECTING A DVD Lite Class Plug your*borrowed DVD/VCR combo player into an outlet and press the “POWER” button on the bottom left hand corner of the player. *Loaner DVD/VCR players are available for pick up at Audio Visual Technology.

PROJECTING A DVD Lite Class Plug the red, yellow, and white cables (composite cables) into the back of the DVD player where it says “Line Out”.

PROJECTING A DVD Lite Class Plug the other end of the composite cables into the corresponding colored jacks on the wall box.

PROJECTING A DVD Lite Class Press the Eject button next to the DVD player to open it. Place DVD in player with label up. Push the Eject button again to close and load the DVD player.

PROJECTING A DVD Lite Class Press the “Source” button on the control panel until the projector shows “VIDEO” in the top right hand corner of the screen. If there is no “Source” button press the “Video” button to display DVD.

PROJECTING A DVD Lite Class There are 2 ways to control your DVD: 1. Use control buttons located on the DVD player itself. 2.Use the remote control that came with the DVD player.

PLAYING A DVD Lite Class To adjust the volume coming from the DVD press the “VOL +” and “VOL –” buttons on the bottom of the control panel.

PLAYING A DVD Lite Class To stop the DVD press the STOP button located on the bottom left hand corner of the DVD player. Press the “Eject” button to retrieve your DVD.

PROJECTING A VHS Lite Class Plug your*borrowed DVD/VCR combo player into an outlet and press the “POWER” button on the bottom left hand corner of the player. *Loaner DVD/VCR players are available for pick up at Audio Visual Technology.

PROJECTING A VHS Lite Class Plug the red, yellow, and white cables (composite cables) into the back of the VHS player where it says “Line Out”.

PROJECTING A VHS Lite Class Plug the other end of the composite cables into the corresponding colored jacks on the wall box.

PROJECTING A VHS Lite Class Put your VHS tape into the slot on the right hand side of the player.

PROJECTING A VHS Lite Class Press the “Source” button on the control panel until the projector displays “Video” in the top right hand corner of the screen to have the projector display the VHS tape. If there is no “Source” button press the “Video” button on the control panel to display the VHS tape.

PROJECTING A VHS Lite Class There are 2 ways to control your VHS: 1. Use control buttons located on the VHS player itself. 2.Use the remote control that came with the VHS player.

PROJECTING A VHS Lite Class To adjust the volume coming from the VHS press the “VOL +” and “VOL –” buttons on the control panel.

PROJECTING A VHS Lite Class To stop the VHS, press the STOP button located on the bottom left hand corner of the VCR. Press the “Eject” button to retrieve your VHS.

TURNING OFF THE A/V SYSTEM Lite Class To turn off the A/V System press the “Power” button located on the control panel twice.

TURNING OFF THE A/V SYSTEM Lite Class Turn off the Laptop or DVD/VCR you are using, disconnect them, and you have completed shutting down the A/V system.

AUDIO VISUAL CONTACT INFO Lite Class Office Phone: Ext Office Office Location: Technology Building Room 110 Office Website: This presentation was created by Katherine Roba ~