1. The Touchpad control panel …all equipment is controlled from here touch it with your finger to start laptop connectors: display, sound, network

2. when you touch the screen youll see:

3. the system takes a moment to turn on while the projector starts. Give it a few seconds.

4. Next, youll see the Sources screen. Touch the button you want to display The System Off button turns everything off when youre finished. laptop vhs tape dvd player cable stations (if equipped) turn everything OFF

5. The laptop screen: Mac laptops need a video adapter. Check with the media center or bring your own. control volume here touch sources to change display to DVD or VCR touch system off when done

6. System Off button turns everything off Dont turn off individual equipment inside cabinet only use touchpad Youll see this screen while projector turns off.

7. No display? May have to re-sync controls 1. touch sources (upper right) 2. select diffferent device 3.touch sources again, and 4.….select original device

8. No sound? Is sound muted? Touch the mute button (right hand side). Is sound turned down? Press the VOL UP button Is the correct device selected? Press sources upper right

9. Pressing too hard? Just kidding. You cant really mess up the touchpad (unless you hit it with a hammer or throw it) Touch away, try things out. Its as simple as we could make it. See following screen for schedule of help sessions.

10. Schedule of training sessions when: DAILY Monday-Friday (Aug. 27 - 31) time: 9 AM, NOON, 3 PM where: Media Center Classroom (library lower level)