COEN STEEL LEADING THE WAY IN GRATING SOLUTIONS FORGED WELDED GRATING | PRESSURE LOCKED GRATING | GRP | PERFORATED METAL PLANKS

GRP GRATINGS  GRP Isophthalic Polyester moulded panels  GRP grating can provide cost effective solutions when designing and manufacturing Platforms, Walkways, Gullies and Trenches and also incorporate the following additional features:  Fire Retardant  (Conforms to ASTM –E84 and ASTM –D635)  Chemical Resistant  Anti Slip – Gritted Top Surface  Lightweight  Allows easy cutting to size on site

GRP GRATING

Forge-Welded Gratings  Industrial forge-welded gratings are economic and safe, especially used for offshore modules, platforms, gangways, staircases as well as for racking and fences.  They are widely used in all branches of industry such as:  Offshore and onshore oil production  Refineries  Mining  Power stations  Cement plants  Gas exploration and supply  Ship building  Civil engineering  Building work  Agriculture  General industrial use  Warehousing  Incineration plants  Desulphurisation plants

Stainless Steel Grating  Coen Stainless Steel Grating is available in ready-made fabricated panels to Clients Instructions or in Standard Panels generally 6.1 metre x 1 metre  Stainless materials can be either 304 or 316 grade  Normally stainless gratings are used in:  highly corrosive or wet environments  on or around machines or machinery  We therefore supply gratings to meet the requirements of the current BS EN ISO  This specifically requires that gratings shall prevent the passage of a 35mm dia ball. All Lichtgitter Stainless gratings are therefore 34mm centres of load bars to comply with this.  Stocked sizes are 25×3, and 30×3 in 34/100 pattern  Other patterns ie. 21/100 and 16/100 are available where quantity is sufficient.  For further information on design of safe load tables call our Oranmore Office on

Combi-deck  Increased strength to weight ratio ensures and economic solution to solid plate grating requirements.  Coen offers three types of “Combi-deck” grating to suit the loading requirements.  Type “A” 3mm Durbar with grating bar spacing at 66mm.  Type “B” 3mm Durbar with grating bar spacing at 41mm.  Type “C” 3mm Durbar with grating bar spacing at 30mm

LokWeld Gratings  LokWeld Gratings are the latest additions to the Lichtgitter range of flooring products.  Produced by combining traditional pressure locked gratings and an integral welding technique at all  cross over joints. Thus forming a strong combination of gratings that can be cut and shaped without risk  of bars becoming loose.  Available in ready-made panels to suit your detail drawings or as standard panels 3 metre x1metre  panels from stock.  Standard Stock Panel  *Type 33x33 pattern (25x2,25x3,30x2,30x3)  *Type 33/22 Pattern (25x2 & 30x2)  Lokweld gratings supplied ready-made panels are end branded by automated welding systems.  Stock panels in self colour finish – Ready-made in self colour or galvanised – Materials are S235JR

Stair & Ladder Treads  Stock treads Lichtgitter Stock Treads are available as shown with end plate and stair-nosing already welded to give 1000mm tread. The loose end plate can be welded to the tread after cutting to length, matching the weld specification at the fixed end  Stair Nosings  Octopus Nosing - standard nosing is used for all locations where an anti-slip nosing is required. This nosing will be fitted as standard unless specified otherwise. Available in standard stock length of 6 metres or 1000mm lengths  Pyramid Nosing -Welded to all stair-treads as an alternative to the above. Good anti-slip properties. Available in stock lengths of 6 metres or 1000mm lengths Chequer-Plate Nosing  Traditional nosing/sight bar available to treads. Available in 1000mm lengths Ladder Treads  Ladder treads, used as a tread welded between flat or tubular stringers. Can be welded to existing ladders over solid round rungs to improve slip resistance