4.2.3 Student Book © 2004 Propane Education & Research CouncilPage Transporting Materials of Trade To transport hazardous material as a material of trade, the material must meet the materials of trade definition, hazard classification, and quantity guidelines. Propane employees at times may be required to transport flammable paint, paint thinners, methanol, or wasp spray while on the job. In this module you will learn to identify: (1)Regulations pertaining to transporting materials of trade (2)Safety requirements for transporting materials of trade

4.2.3 Student Book © 2004 Propane Education & Research CouncilPage 1 Regulations for Transporting Materials of Trade DOT defines “Materials of Trade” as small amounts of certain hazardous materials transported on a motor vehicle for workers to use in direct support of their business. When you transport small amounts of these materials under the Materials of Trade exceptions, you are not subject to some of the regulations that apply to the transportation of hazardous materials. These include: Shipping papers Placarding Emergency response information Training for hazardous materials carried as materials of trade

4.2.3 Student Book © 2004 Propane Education & Research CouncilPage 2 Safety Requirements for Transporting Materials of Trade Classification Requirements— The material must meet the materials of trade definition according to hazard classification and must belong to one of the following classifications: Division 2.1Flammable gas Division 2.2Non-flammable gas Class 3Flammable liquid Division 4.1Flammable solid Division 4.3, PG II or IIIDangerous when wet Division 5.1Oxidizer Division 5.2Organic peroxide Division 6.1Poison Class 8Corrosive Class 9Miscellaneous ORM-DOther regulated material

4.2.3 Student Book © 2004 Propane Education & Research CouncilPage 2 Safety Requirements for Transporting Materials of Trade Quantity Requirements— Figure 1 conveys quantity limits that apply to Classes 3 and 8. The limits are gross mass or capacity and include the weight of the packaging. Packing Group:Package Quantity Limits for Classes 3 and 8: PG INot over 1 pound or 1 pint PG II or IIINot over 66 pounds or 8 gallons Figure 1. Quantity Limits

4.2.3 Student Book © 2004 Propane Education & Research CouncilPage 3 Safety Requirements for Transporting Materials of Trade Quantity Requirements Figure 2. Excerpt from Hazardous Materials Table

4.2.3 Student Book © 2004 Propane Education & Research CouncilPage 4 Safety Requirements for Transporting Materials of Trade Packaging Requirements — The following guidelines must be met for you to use the materials of trade exceptions: Liquids and GasesLeak proof, securely closed, secured to prevent movement, protected against damage GasolineMetal or plastic container and must conform to the HMR (Hazardous Material Regulations) or OSHA requirements Materials must be packaged in the manufacturer’s original packaging or one of equal strength and quality. Packaging for Hazardous Materials:

4.2.3 Student Book © 2004 Propane Education & Research CouncilPage 4 Safety Requirements for Transporting Materials of Trade Marking Requirements— Non-bulk packages (capacity of 119 gallons or less for liquids), other than cylinders, must be marked with the common name or proper shipping name of the material being carried. 1.The presence of the hazardous materials 2.The requirements of the Materials of Trade exceptions Driver Requirements— DOT requires that the operator of a motor vehicle containing materials of trade be informed of the following: Total Gross Weight Requirements— The total gross weight of all materials of trade carried on one motor vehicle cannot exceed 440 pounds

4.2.3 Student Book © 2004 Propane Education & Research CouncilPage 5 Safety Requirements for Transporting Materials of Trade Figure 3. Summary of Products Eligible for the Exceptions

4.2.3 Student Book © 2004 Propane Education & Research CouncilPage 6 Safety Requirements for Transporting Materials of Trade Penalty for Failure to Follow the Guidelines— If you fail to follow the guidelines for the materials of trade exceptions, you will be in violation of many requirements of the HMR and may be subject to significant fines and penalties. Currently the HMR allows for fines ranging from $250 to $27,500 per day, per violation. Criminal penalties can also be imposed on individuals directly involved with non-compliance.

4.2.3 Student Book © 2004 Propane Education & Research CouncilPages 7 & 8 Time to See If You Got the Key Points of This Module… Complete the Review on page 7. See if you are ready for the Certification Exam by checking off the performance criteria on page 8.