Proximity Effect in Electron Beam Lithography

Slides:



Advertisements
Similar presentations
Basic Electron Microscopy
Advertisements

Focused ion beam (FIB) 1.Overview. 2.Ion source and optics. 3.Ion-solid interaction, damage. 4.Scanning ion beam imaging. ECE 730: Fabrication in the nanoscale:
SEM & TEM in Polymer Characterization
BY Assistant Professor Dr. Akram R. Jabur Department of Materials Eng. University Of Technology.
Lecture 11. Microscopy. Optical or light microscopy involves passing visible light transmitted through or reflected from the sample through a single or.
Electron Microscopy for Catalyst Characterization Dr. King Lun Yeung Department of Chemical Engineering Hong Kong University of Science and Technology.
Scanning Electron Microscope (SEM)
Groups: WA 2,4,5,7. History  The electron microscope was first invented by a team of German engineers headed by Max Knoll and physicist Ernst Ruska in.
UWO Nanofabrication Facility and Science Studio. Facility to be hooked into Science Studio: Western Nanofabrication Facility, University of Western Ontario.
Hong Koh Yiin -CAMTEC Image from:
X-radiation. X-rays are part of the electromagnetic spectrum. X-radiation (composed of X-rays) is a form of electromagnetic radiation. X- rays have a.
First of all, do you know any methods to check chemical composition? Or how you know what is what? First of all, do you know any methods to check chemical.
Vicki Bourget & Vinson Gee April 23, 2014
Development of Scanning Probe Lithography (SPL)
Lecture 5.1 Scanning Electron Microscopy (SEM)
CHAPTER 8 (Chapter 11 in text) Characterization of Nanomaterials.
Activities during UK-Japan Young Scientist Workshop Dr Riz Khan Room 31DJ02, x6062, Advanced Technology Institute University.
Antireflex coatings Antireflex coating INESC: 150, 400Å TiWN 2 Resist was exposed both to the light source and to reflected beams from resist/sample.
FYSZ460 Electron Beam Lithography Electron Beam Lithography FYSZ460 Advanced Laboratory Exercise Mikko Palosaari
BY SANTANU PRAMANIK(09369) HITESH KUMAR GUPTA(09320) CHANDAN SINGH(09260) SCANNING ELECTRON MICROSCOPE MATERIAL SCIENCE ASSIGNMENT.
MEMs Fabrication Alek Mintz 22 April 2015 Abstract
Electron Microscope Sarah, David, Jóhann.
Proximity Effect in EBL Jian Wu Feb. 11, Outline Introduction Physical and quantitative model of proximity effect Reduction and correction of proximity.
Scanning Electron Microscopy
NANOSCALE LITHOGRAPHY MICHAEL JOHNSTON 4/13/2015.
Nano-Electronics S. Mohajerzadeh University of Tehran.
Lithographic Processes
Top-down approach for formation of nanostructures: Lithography with light, electrons and ions Seminar Nanostrukturierte Festkörper, Martin Hulman.
SEM (SCANNING ELECTRON MICROSCOPE) Özgen Buğdaycı Elif Topçuoğlu Yavuz Duran Hacettepe University
Electron Microscopy 1 Electron Microscopy (EM) Applying Atomic Structure Knowledge to Chemical Analysis.
NANOMETER SCALE LITHOGRAPHY DANIEL BERNARD – BENJAMEN STROBELAPRIL 29, 2013 EE 4611 – STANLEY G. BURNS NANOMETER SCALE LITHOGRAPHY, ALSO KNOWN AS NANOLITHOGRAPHY,
Scanning Electron Microscope (SEM)
JEOL JBX-9300FS Electron Beam Lithography System Training
Other modes associated with SEM: EBIC
Center for Materials for Information Technology an NSF Materials Science and Engineering Center Nanolithography Lecture 15 G.J. Mankey
Scanning Electron Microscope (SEM)
NANO 225 Micro/NanoFabrication Electron Microscopes 1.
Reminders for this week Homework #4 Due Wednesday (5/20) Lithography Lab Due Thursday (5/21) Quiz #3 on Thursday (5/21) – In Classroom –Covers Lithography,
E-Beam Lithography Antony D. Han Chem 750 U of Waterloo
LITHOGRAPHY IN THE TOP-DOWN PROCESS - NEW CONCEPTS
Lithography. MAIN TYPES OF LITHOGRAPHY: * Photolithography * Electron beam lithography –X-ray lithography –Focused ion beam lithography –Neutral atomic.
Self-assembly Nanostructure and Lithography
Proximity Effect 游明峰. 1 What is the proximity effect? 2 Proximity Effect Correction 3 Conclusion 4 Reference Outline.
E-beam Size-Dependent Self- Assembly Protein Array.
Proximity Effect in EBL by: Abhay Kotnala January 2013
Scanning capacitance microscopy
SEM- Schematic Overview. Electron Detection Tungsten Filament Electron Source.
08/03/09 SEM signal generation
SEM Scanning Electron Microscope
Proximity Effect in EBL by: Zeinab Mohammadi November 2011
Lithography in the Top Down Method New Concepts Lithography In the Top-Down Process New Concepts Learning Objectives –To identify issues in current photolithography.
Developing Positive Negative Etching and Stripping Polymer Resist Thin Film Substrate Resist Exposing Radiation Figure 1.1. Schematic of positive and negative.
LITHOGRAPHY IN THE TOP-DOWN PROCESS - BASICS
Electron scattering in resist and substrate Proximity effect Resist interactions (positive /negative/chemically amplified resists, resist contrast) Dose.
Questions/Problems on SEM microcharacterization Explain why Field Emission Gun (FEG) SEM is preferred in SEM? How is a contrast generated in an SEM? What.
Interaction of x-ray photons (and gamma ray photons) with matter.
SARDAR PATEL INSTITUTE OF TECHNOLOGY E.NO : Guide By:- V.N.Thakkar.
NANOSCALE LITHOGRAPHY, TECHNIQUES AND TECHNOLOGY EE 4611 DEHUA LIU 4/8/2016.
Speaker: Shiuan-Li Lin Advisor : Sheng-Lung Huang
Do it with electrons !. Microscopy Structure determines properties We have discussed crystal structure (x-ray diffraction) But consider now different.
Process technology. Process Technology 2 MMIC-HEMT, ETH Zürich Electrical nm contacts, Uni Basel Luft InP 70 nm DFB Laser, WSI München Applications: Nano.
Presentation on SEM (Scanning of Electron Microscope) Represented by:-Ravi Kumar Roll:- (BT/ME/1601/006)
Etching Processes for Microsystems Fabrication
Laboratory equipment Lecture (3).
Introduction to Scanning Electron Microscope by Sameer S
TEM and SEM.
CHE 5480 Summer 2005 Maricel Marquez
Do it with electrons !.
Proximity correction in electron beam lithography
Metal Assisted Chemical Etching (MacEtch)
Presentation transcript:

Proximity Effect in Electron Beam Lithography By Hussein Ayedh

Electron beam lithography (EBL) One of the most commonly used methods to pattern structures on a nanometer scale. EBL systems are a cornerstone of modern micro- and nanofabrication. Special electron beam sensitive resists have to be used for EBL. The most common one is polymethyl methacrylate (PMMA).

Electron beam lithography (EBL) Two main electron sources: Thermionic emission source Based on electron emission from a filament heated to a high T. Field emission source Based on a field emission effect from a sharp W-tip.

Electron beam lithography (EBL) Advantages Extremely high resolution Direct patterning on a substrate with high degree of automation (No mask required) But: Low throughput (Raster Scan) Expensive (Vector Scan)

The proximity effect A limiting factor of high resolution and contrast of EBL. Depends on the pattern density and the substrate material, as well as parameters of the EBL exposure. Acceleration voltage Electron dose

The proximity effect Source: backscattering and secondary electrons.  Secondary electrons are produced when an incident electron excites an electron in the sample and loses some of its energy in the process. The excited electron moves towards the surface.

The proximity effect The combined effect of forward scattering and backscattering broadens the electron beam. The intensity distribution can be approximated by a sum of two Gaussian shapes. α : Forward scattering dispersion β : Backscattering dispersion η : Ratio of backscattered to forward scattered contribution

Approach Study the proximity effect by exposing dot matrices on a resist and varying Acceleration voltage Electron dose Density of dot matrices

Approach - patterns

Experiment 200 nm of ZEP 520A7 resist on InP substrate. Patterning in EBL. Development in O-Xylene. Evaporation of 20 nm of Au. Lift-off in remover 1165. SEM imaging.

Results at 10 kV Doses are in units of 0.01 pC

Results at 20 kV Doses are in units of 0.01 pC

Results

Discussion Acceleration voltage Electron dose Density Large voltage = better resolution Electron dose Large dose = larger dots and longer time Density Higher density = larger dots

Conclusion Good resolution in this experiment was achieved by: High acceleration voltage (20 kV) Either high dose and low density or Intermediate dose and intermediate density

Discussion

Reduction of proximity effect Proximity effect can be reduced by: • High electron energy (>100 keV). • Low electron energy (< 3 keV). • Thin resists. • Low Z material of substrate ( secondary electron yield is generally higher for high atomic number targets) • can be corrected by software.

Reduction of proximity effect 10 keV Resist Substrate 100 keV 3 keV

Reduction of proximity effect High energy EBL: (>100 keV) • Dissipation of energy deep in substrate • Secondary electrons can not reach the surface to expose the resist. • Forward scattering in the resist is very small Proximity effect is reduced! But: expensive, big and complicated EBL system

Reduction of proximity effect Low energy EBL: (1-3 keV) • Dissipation of electron energy in the resist only. • No generation of secondary electrons in the substrate! Limitations: • Forward scattering is large -> low resolution. • E-beam size is big due to Column interaction between electrons. • Electron optics works poor at low energy. • Resist must be thin for complete exposure (e.g. 70 nm for 2 keV) difficult to use. • Hard to focus the e-beam, the beam is very sensitive to external fields

Reduction of proximity effect Practical proximity effect correction: Dose scaling: changes in exposure dose in parts of the structure. Dedicated software is used. Shape correction: (a) reduction of structure size and (b) additional structures at underexposed areas Dose scaling by software is the main method of proximity effect correction!

References [1] S.M.Sze ’’Semiconductor devices physics and technology ‘’2ND Edition ,willy ,2001. [2] S.A.Campbell ’’Fabrication Engineering at the Micro and Nanoscale‘’4th Edition ,Oxford ,2013. [3] G. May and S.M.Sze ’’Fundamentals of Semiconductor Fabrication‘’ ,willy ,2004. [4] Advanced Processing of Nanostructures Lecture note, FFFN01, Lund University.